hello Tahaski, hello everyone reading this message.
Thank you for the patience you had with me. Now I finally came to set up this system for crash analysis, compiling the kernel with debug informations and frame pointers and so on. I set up kdump also. Unfortunately, I can get no useful output. The last things the system wrote before dying have been reconstructed. I noted down decimal values with the help of my mum. She wrote them down on a piece of paper. I am hitting the following messages: azx_get_response timeout, switching to polling mode: last cmd=0x014ba000 azx_get_response timeout, switching to single_cmd mode: last cmd=0x014ba000
Unfortunately the system wasn't able to reboot via crashdump/kexec mechanism nor to print out more useful output.
power_save = 40 power_save_controller = Y
thank you very much, Enrico
PS: I am using VERSA mode, should I switch back to standard VGA? No graphical user interface running.
My system dmesg appended: Linux version 4.10.0-rc2ho+ (mrkiko@atlantide2) (gcc version 6.2.1 20160830 (GCC) ) #1 SMP Tue Jan 3 12:03:10 CET 2017 KERNEL supported cpus: Intel GenuineIntel Atom PSE erratum detected, BIOS microcode update recommended Disabled fast string operations x86/fpu: Legacy x87 FPU detected. e820: BIOS-provided physical RAM map: BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved BIOS-e820: [mem 0x00000000000e2000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x000000003f64ffff] usable BIOS-e820: [mem 0x000000003f650000-0x000000003f65ffff] reserved BIOS-e820: [mem 0x000000003f660000-0x000000003f66dfff] ACPI data BIOS-e820: [mem 0x000000003f66e000-0x000000003f6affff] ACPI NVS BIOS-e820: [mem 0x000000003f6b0000-0x000000003f6bffff] reserved BIOS-e820: [mem 0x000000003f6c8000-0x000000003f7fffff] reserved BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! SMBIOS 2.5 present. DMI: ASUSTeK Computer INC. 1101HAG/1101HAG, BIOS 0102 08/17/2009 e820: update [mem 0x00000000-0x00000fff] usable ==> reserved e820: remove [mem 0x000a0000-0x000fffff] usable e820: last_pfn = 0x3f650 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-DFFFF uncachable E0000-EFFFF write-through F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask 0C0000000 write-back 1 base 03F700000 mask 0FFF00000 uncachable 2 base 03F800000 mask 0FF800000 uncachable 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT initial memory mapped: [mem 0x00000000-0x0bffffff] Base memory trampoline at [c009b000] 9b000 size 16384 BRK [0x0bad5000, 0x0bad5fff] PGTABLE BRK [0x0bad6000, 0x0bad6fff] PGTABLE ACPI: Early table checksum verification disabled ACPI: RSDP 0x00000000000FBFD0 000024 (v02 ACPIAM) ACPI: XSDT 0x000000003F660100 00005C (v01 081709 XSDT1643 20090817 MSFT 00000097) ACPI: FACP 0x000000003F660290 0000F4 (v04 081709 FACP1643 20090817 MSFT 00000097) ACPI: DSDT 0x000000003F660430 0094D3 (v02 A1453 A1453000 00000000 INTL 20060113) ACPI: FACS 0x000000003F66E000 000040 ACPI: FACS 0x000000003F66E000 000040 ACPI: APIC 0x000000003F660390 00005C (v02 081709 APIC1643 20090817 MSFT 00000097) ACPI: MCFG 0x000000003F6603F0 00003C (v01 081709 OEMMCFG 20090817 MSFT 00000097) ACPI: OEMB 0x000000003F66E040 00012C (v01 081709 OEMB1643 20090817 MSFT 00000097) ACPI: HPET 0x000000003F669910 000038 (v01 081709 OEMHPET 20090817 MSFT 00000097) ACPI: GSCI 0x000000003F66E170 002024 (v01 081709 GMCHSCI 20090817 MSFT 00000097) ACPI: SSDT 0x000000003F670B60 0004F0 (v01 PmRef CpuPm 00003000 INTL 20060113) ACPI: Local APIC address 0xfee00000 126MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 0 - 377fe000 Reserving 64MB of memory at 448MB for crashkernel (System RAM: 1013MB) BRK [0x0bad7000, 0x0bad7fff] PGTABLE Zone ranges: Normal [mem 0x0000000000001000-0x00000000377fdfff] HighMem [mem 0x00000000377fe000-0x000000003f64ffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000000001000-0x000000000009efff] node 0: [mem 0x0000000000100000-0x000000003f64ffff] Initmem setup node 0 [mem 0x0000000000001000-0x000000003f64ffff] On node 0 totalpages: 259566 free_area_init_node: node 0, pgdat cb9cc0c0, node_mem_map f6968028 Normal zone: 2220 pages used for memmap Normal zone: 0 pages reserved Normal zone: 227228 pages, LIFO batch:31 HighMem zone: 32338 pages, LIFO batch:7 Using APIC driver default ACPI: PM-Timer IO Port: 0x908 ACPI: Local APIC address 0xfee00000 IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 smpboot: Allowing 2 CPUs, 0 hotplug CPUs e820: [mem 0x3f800000-0xfedfffff] available for PCI devices clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 percpu: Embedded 19 pages/cpu @f77d5000 s45900 r0 d31924 u77824 pcpu-alloc: s45900 r0 d31924 u77824 alloc=19*4096 pcpu-alloc: [0] 0 [0] 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257346 Kernel command line: auto BOOT_IMAGE=ArchCrash root=801 crashkernel=64M PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Initializing CPU#0 Initializing HighMem for node 0 (000377fe:0003f650) Initializing Movable for node 0 (00000000:00000000) Memory: 953840K/1038264K available (4294K kernel code, 198K rwdata, 1464K rodata, 348K init, 456K bss, 84424K reserved, 0K cma-reserved, 129352K highmem) virtual kernel memory layout: fixmap : 0xfff8f000 - 0xfffff000 ( 448 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xcb9d5000 - 0xcba2c000 ( 348 kB) .data : 0xcb831bfa - 0xcb9d3a00 (1671 kB) .text : 0xcb400000 - 0xcb831bfa (4294 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. Build-time adjustment of leaf fanout to 32. NR_IRQS:2304 nr_irqs:440 16 CPU 0 irqstacks, hard=c0010000 soft=c0012000 Console: colour dummy device 80x25 console [tty0] enabled clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns hpet clockevent registered tsc: Fast TSC calibration using PIT tsc: Detected 1331.312 MHz processor Calibrating delay loop (skipped), value calculated using timer frequency.. 2662.62 BogoMIPS (lpj=1331312) pid_max: default: 32768 minimum: 301 ACPI: Core revision 20160930 ACPI: 2 ACPI AML tables successfully acquired and loaded Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) Atom PSE erratum detected, BIOS microcode update recommended Disabled fast string operations CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 5 MCE banks CPU0: Thermal monitoring enabled (TM2) process: using mwait in idle threads Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0 Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0 Freeing SMP alternatives memory: 24K smpboot: Max logical packages: 2 Enabling APIC mode: Flat. Using 1 I/O APICs ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 smpboot: CPU0: Intel(R) Atom(TM) CPU Z520 @ 1.33GHz (family: 0x6, model: 0x1c, stepping: 0x2) Performance Events: PEBS fmt0+, LBR disabled due to erratumAtom events, Intel PMU driver. ... version: 3 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 0000000700000003 smp: Bringing up secondary CPUs ... CPU 1 irqstacks, hard=c0114000 soft=c0116000 x86: Booting SMP configuration: .... node #0, CPUs: #1 Initializing CPU#1 Atom PSE erratum detected, BIOS microcode update recommended Disabled fast string operations smp: Brought up 1 node, 2 CPUs smpboot: Total of 2 processors activated (5325.09 BogoMIPS) devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns NET: Registered protocol family 16 cpuidle: using governor menu ACPI: bus type PCI registered PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: not using MMCONFIG PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3 PCI: Using configuration type 1 for base access ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: Executed 1 blocks of module-level executable AML code ACPI: Dynamic OEM Table Load: ACPI: SSDT 0x00000000C0096800 0001FA (v01 PmRef Cpu0Ist 00003000 INTL 20060113) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0x00000000C008B000 00065D (v01 PmRef Cpu0Cst 00003001 INTL 20060113) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0x00000000C005CE00 0000CC (v01 PmRef Cpu1Ist 00003000 INTL 20060113) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0x00000000C004E6C0 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20060113) ACPI : EC: EC started ACPI: _SB_.PCI0.SBRG.EC0_: Used as first EC ACPI: _SB_.PCI0.SBRG.EC0_: GPE=0xd, EC_CMD/EC_SC=0x66, EC_DATA=0x62 ACPI: _SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources PCI: Using MMCONFIG for extended config space PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] pci_bus 0000:00: root bus resource [mem 0x3f800000-0xdfffffff window] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xffffffff window] pci_bus 0000:00: root bus resource [bus 00-ff] pci 0000:00:00.0: [8086:8100] type 00 class 0x060000 pci 0000:00:02.0: [8086:8108] type 00 class 0x030000 pci 0000:00:02.0: reg 0x10: [mem 0xf3f80000-0xf3ffffff] pci 0000:00:02.0: reg 0x14: [io 0xc880-0xc887] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff] pci 0000:00:02.0: reg 0x1c: [mem 0xf3f40000-0xf3f7ffff] pci 0000:00:1b.0: [8086:811b] type 00 class 0x040300 pci 0000:00:1b.0: reg 0x10: [mem 0xf3f38000-0xf3f3bfff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot pci 0000:00:1c.0: [8086:8110] type 01 class 0x060400 pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: [8086:8112] type 01 class 0x060400 pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1d.0: [8086:8114] type 00 class 0x0c0300 pci 0000:00:1d.0: reg 0x20: [io 0xb880-0xb89f] pci 0000:00:1d.1: [8086:8115] type 00 class 0x0c0300 pci 0000:00:1d.1: reg 0x20: [io 0xc080-0xc09f] pci 0000:00:1d.2: [8086:8116] type 00 class 0x0c0300 pci 0000:00:1d.2: reg 0x20: [io 0xc480-0xc49f] pci 0000:00:1d.7: [8086:8117] type 00 class 0x0c0320 pci 0000:00:1d.7: reg 0x10: [mem 0xf3f37c00-0xf3f37fff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1f.0: [8086:8119] type 00 class 0x060100 pci 0000:00:1f.1: [8086:811a] type 00 class 0x010180 pci 0000:00:1f.1: reg 0x20: [io 0xffa0-0xffaf] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376] pci 0000:03:00.0: [1969:1062] type 00 class 0x020000 pci 0000:03:00.0: reg 0x10: [mem 0xfbfc0000-0xfbffffff 64bit] pci 0000:03:00.0: reg 0x18: [io 0xe880-0xe8ff] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:1c.0: PCI bridge to [bus 03] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] pci 0000:00:1c.0: bridge window [mem 0xfbf00000-0xfbffffff] pci 0000:01:00.0: [168c:002b] type 00 class 0x028000 pci 0000:01:00.0: reg 0x10: [mem 0xfbef0000-0xfbefffff 64bit] pci 0000:01:00.0: supports D1 pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold pci 0000:00:1c.1: PCI bridge to [bus 01-02] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] pci 0000:00:1c.1: bridge window [mem 0xf4000000-0xfbefffff] pci 0000:00:1c.1: bridge window [mem 0xcc000000-0xcfffffff pref] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 7 10 11 12 14 15) ACPI: Enabled 2 GPEs in block 00 to 1F ACPI : EC: event unblocked ACPI: _SB_.PCI0.SBRG.EC0_: GPE=0xd, EC_CMD/EC_SC=0x66, EC_DATA=0x62 ACPI: _SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions and events SCSI subsystem initialized libata version 3.00 loaded. ACPI: bus type USB registered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] e820: reserve RAM buffer [mem 0x3f650000-0x3fffffff] HPET: 3 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter clocksource: Switched to clocksource hpet hugetlbfs: disabling because there are no supported hugepage sizes pnp: PnP ACPI init system 00:00: [mem 0x40000000-0x7fffffff] has been reserved system 00:00: [mem 0x3f800000-0x3fffffff] has been reserved system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) system 00:03: [io 0x0374-0x0375] has been reserved system 00:03: [io 0x03f4-0x03f5] has been reserved system 00:03: [io 0x0380-0x0387] has been reserved system 00:03: [io 0x09f4-0x09ff] has been reserved system 00:03: [io 0x04d0-0x04d1] has been reserved system 00:03: [io 0x0900-0x09f3] has been reserved system 00:03: [io 0x0400-0x043f] has been reserved system 00:03: [io 0x0480-0x04bf] has been reserved system 00:03: [mem 0xf0000000-0xf0003fff] has been reserved system 00:03: [mem 0x00000384-0x00000387] could not be reserved system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:06: Plug and Play ACPI device, IDs SYN0a13 SYN0a01 SYN0a04 SYN0002 PNP0f13 (active) system 00:07: [mem 0xe0000000-0xefffffff] has been reserved system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved system 00:08: [mem 0x00100000-0x3f7fffff] could not be reserved system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active) pnp: PnP ACPI: found 9 devices clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff pref] to [bus 03] add_size 200000 add_align 100000 pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff pref] res_to_dev_res add_size 200000 min_align 100000 pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x002fffff pref] res_to_dev_res add_size 200000 min_align 100000 pci 0000:00:1c.0: BAR 9: assigned [mem 0x80000000-0x801fffff pref] pci 0000:00:1c.0: PCI bridge to [bus 03] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] pci 0000:00:1c.0: bridge window [mem 0xfbf00000-0xfbffffff] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff pref] pci 0000:00:1c.1: PCI bridge to [bus 01-02] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] pci 0000:00:1c.1: bridge window [mem 0xf4000000-0xfbefffff] pci 0000:00:1c.1: bridge window [mem 0xcc000000-0xcfffffff pref] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] pci_bus 0000:00: resource 8 [mem 0x3f800000-0xdfffffff window] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xffffffff window] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] pci_bus 0000:03: resource 1 [mem 0xfbf00000-0xfbffffff] pci_bus 0000:03: resource 2 [mem 0x80000000-0x801fffff pref] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] pci_bus 0000:01: resource 1 [mem 0xf4000000-0xfbefffff] pci_bus 0000:01: resource 2 [mem 0xcc000000-0xcfffffff pref] NET: Registered protocol family 2 TCP established hash table entries: 8192 (order: 3, 32768 bytes) TCP bind hash table entries: 8192 (order: 4, 65536 bytes) TCP: Hash tables configured (established 8192 bind 8192) UDP hash table entries: 512 (order: 2, 16384 bytes) UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) NET: Registered protocol family 1 pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci 0000:03:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format) PCI: CLS 32 bytes, default 64 futex hash table entries: 512 (order: 3, 32768 bytes) workingset: timestamp_bits=14 max_order=18 bucket_order=4 Key type asymmetric registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler cfq registered (default) vesafb: mode is 1024x768x16, linelength=2048, pages=4 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 vesafb: framebuffer at 0x3f800000, mapped to 0xf8400000, using 3072k, total 7872k Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device ACPI: AC Adapter [AC0] (on-line) input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 ACPI: Lid Switch [LID] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 ACPI: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 ACPI: Power Button [PWRB] pata_sch 0000:00:1f.1: version 0.2 scsi host0: pata_sch scsi host1: pata_sch ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-pci 0000:00:1d.7: EHCI Host Controller ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci-pci 0000:00:1d.7: debug port 1 ehci-pci 0000:00:1d.7: cache line size of 32 is not supported ehci-pci 0000:00:1d.7: irq 19, io mem 0xf3f37c00 ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 4.10.0-rc2ho+ ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000b880 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 4.10.0-rc2ho+ uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ata1.00: ATA-9: WDC WD5000LPVX-00V0TT0, 01.01A01, max UDMA/133 ata1.00: 976773168 sectors, multi 16: LBA48 ata1.00: configured for UDMA/100 ACPI: Battery Slot [BAT0] (battery present) scsi 0:0:0:0: Direct-Access ATA WDC WD5000LPVX-0 1A01 PQ: 0 ANSI: 5 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000c080 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 4.10.0-rc2ho+ uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c480 sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) sd 0:0:0:0: [sda] 4096-byte physical blocks sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb 1-1: new high-speed USB device number 2 using ehci-pci usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 4.10.0-rc2ho+ uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected rtc_cmos 00:01: RTC can wake from S4 rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs hidraw: raw HID events driver (C) Jiri Kosina usbcore: registered new interface driver usbhid usbhid: USB HID core driver microcode: sig=0x106c2, pf=0x1, revision=0x0 microcode: Microcode Update Driver: v2.2. Using IPI Shortcut mode usb 1-1: New USB device found, idVendor=05ac, idProduct=1006 usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-1: Product: Keyboard Hub usb 1-1: Manufacturer: Apple, Inc. usb 1-1: SerialNumber: 000000000000 hub 1-1:1.0: USB hub found hub 1-1:1.0: 3 ports detected random: fast init done registered taskstats version 1 Key type big_key registered Key type encrypted registered usb 1-3: new high-speed USB device number 3 using ehci-pci rtc_cmos 00:01: setting system clock to 2017-01-03 13:28:15 UTC (1483450095) EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 8:1. devtmpfs: mounted Freeing unused kernel memory: 348K Write protecting the kernel text: 4296k usb 1-3: New USB device found, idVendor=05e3, idProduct=0608 usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 usb 1-3: Product: USB2.0 Hub hub 1-3:1.0: USB hub found hub 1-3:1.0: 4 ports detected Write protecting the kernel read-only data: 1472k usb 1-1.2: new low-speed USB device number 4 using ehci-pci tsc: Refined TSC clocksource calibration: 1331.297 MHz clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x13309b1c550, max_idle_ns: 440795236824 ns usb 1-1.2: New USB device found, idVendor=05ac, idProduct=0250 usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1.2: Product: Apple Keyboard usb 1-1.2: Manufacturer: Apple Inc. usb 1-4: new high-speed USB device number 5 using ehci-pci usb 1-4: New USB device found, idVendor=12d1, idProduct=1001 usb 1-4: New USB device strings: Mfr=2, Product=1, SerialNumber=0 usb 1-4: Product: HUAWEI Mobile usb 1-4: Manufacturer: HUAWEI Technology usb 1-3.3: new high-speed USB device number 6 using ehci-pci usb 1-3.3: New USB device found, idVendor=05e3, idProduct=0608 usb 1-3.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 usb 1-3.3: Product: USB2.0 Hub hub 1-3.3:1.0: USB hub found hub 1-3.3:1.0: 4 ports detected random: crng init done usb 4-2: new full-speed USB device number 2 using uhci_hcd usb 4-2: New USB device found, idVendor=0b05, idProduct=b700 usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 4-2: Product: BT-253 usb 4-2: Manufacturer: Broadcom Corp usb 4-2: SerialNumber: 002243FA5A5C clocksource: Switched to clocksource tsc usb 1-3.4: new high-speed USB device number 8 using ehci-pci usb 1-3.4: New USB device found, idVendor=15a4, idProduct=9016 usb 1-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-3.4: Product: DVB-T 2 usb 1-3.4: Manufacturer: Afatech usb 1-3.4: SerialNumber: 010101010600001 Afatech DVB-T 2: Fixing fullspeed to highspeed interval: 10 -> 7 input: Afatech DVB-T 2 as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3.4/1-3.4:1.1/0003:15A4:9016.0003/input/input3 usb 1-7: new high-speed USB device number 9 using ehci-pci hid-generic 0003:15A4:9016.0003: input,hidraw0: USB HID v1.01 Keyboard [Afatech DVB-T 2] on usb-0000:00:1d.7-3.4/input1 usb 1-7: New USB device found, idVendor=13d3, idProduct=5071 usb 1-7: New USB device strings: Mfr=2, Product=3, SerialNumber=0 usb 1-7: Product: USB2.0 UVC 1.3M WebCam usb 1-7: Manufacturer: GenesysLogic Technology Co. III, Ltd. usb 1-8: new high-speed USB device number 10 using ehci-pci usb 1-8: New USB device found, idVendor=058f, idProduct=6335 usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-8: Product: Mass Storage Device usb 1-8: Manufacturer: Generic usb 1-8: SerialNumber: 058F63356336 NET: Registered protocol family 10 Segment Routing with IPv6 ip_tables: (C) 2000-2006 Netfilter Core Team systemd[1]: systemd 232 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) systemd[1]: Detected architecture x86. systemd[1]: Set hostname to <gatosaldo>. systemd[1]: [/usr/lib/systemd/system/rc-local.service:18] Support for option SysVStartPriority= has been removed and it is ignored systemd[1]: Listening on Journal Socket. systemd[1]: Started Forward Password Requests to Wall Directory Watch. systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. systemd[1]: Listening on Journal Socket (/dev/log). systemd[1]: Listening on Process Core Dump Socket. EXT4-fs (sda1): re-mounted. Opts: nobarrier,noauto_da_alloc systemd-journald[649]: Received request to flush runtime journal from PID 1 Bluetooth: Core ver 2.22 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state Monitor-Mwait will be used to enter C-3 state tsc: Marking TSC unstable due to TSC halts in idle clocksource: Switched to clocksource hpet i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 thermal LNXTHERM:00: registered as thermal_zone0 wmi: Mapper loaded ACPI: Thermal Zone [TZ00] (58 C) serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 atl1c 0000:03:00.0: version 1.0.1.1-NAPI input: Apple Inc. Apple Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.2/1-1.2:1.0/0003:05AC:0250.0001/input/input4 apple 0003:05AC:0250.0001: input,hidraw1: USB HID v1.11 Keyboard [Apple Inc. Apple Keyboard] on usb-0000:00:1d.7-1.2/input0 input: Apple Inc. Apple Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.2/1-1.2:1.1/0003:05AC:0250.0002/input/input5 apple 0003:05AC:0250.0002: input,hidraw2: USB HID v1.11 Device [Apple Inc. Apple Keyboard] on usb-0000:00:1d.7-1.2/input1 usbcore: registered new interface driver btusb media: Linux media interface: v0.10 usb-storage 1-4:1.0: USB Mass Storage device detected usb-storage 1-4:1.1: USB Mass Storage device detected usb-storage 1-4:1.2: USB Mass Storage device detected usb-storage 1-8:1.0: USB Mass Storage device detected scsi host2: usb-storage 1-8:1.0 usbcore: registered new interface driver usb-storage Adding 2894868k swap on /dev/sda2. Priority:-1 extents:1 across:2894868k usbcore: registered new interface driver usbserial scsi 2:0:0:0: Direct-Access Single Flash Reader 1.00 PQ: 0 ANSI: 0 sd 2:0:0:0: [sdb] 124735488 512-byte logical blocks: (63.9 GB/59.5 GiB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00 Linux video capture interface: v2.00 sd 2:0:0:0: [sdb] No Caching mode page found sd 2:0:0:0: [sdb] Assuming drive cache: write through usbcore: registered new interface driver option usbcore: registered new interface driver uas usbserial: USB Serial support registered for GSM modem (1-port) option 1-4:1.0: GSM modem (1-port) converter detected usb 1-4: GSM modem (1-port) converter now attached to ttyUSB0 option 1-4:1.1: GSM modem (1-port) converter detected usb 1-4: GSM modem (1-port) converter now attached to ttyUSB1 option 1-4:1.2: GSM modem (1-port) converter detected usb 1-4: GSM modem (1-port) converter now attached to ttyUSB2 sdb: sdb1 sd 2:0:0:0: [sdb] Attached SCSI removable disk usb 1-3.4: dvb_usb_v2: found a 'Afatech AF9015 reference design' in warm state usb 1-3.4: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer dvbdev: DVB: registering new adapter (Afatech AF9015 reference design) usb 1-3.4: media controller created dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered. atl1c 0000:03:00.0 enp3s0: renamed from eth0 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input6 i2c i2c-0: af9013: firmware version 5.24.0.0 usb 1-3.4: DVB: registering adapter 0 frontend 0 (Afatech AF9013)... dvbdev: dvb_create_media_entity: media entity 'Afatech AF9013' registered. i2c i2c-0: tda18218: NXP TDA18218HN successfully identified usb 1-3.4: dvb_usb_v2: 'Afatech AF9015 reference design' successfully initialized and connected usbcore: registered new interface driver dvb_usb_af9015 asus_wmi: ASUS WMI generic driver loaded eeepc_wmi: Found legacy ATKD device (ASUS010) eeepc_wmi: WMI device present, but legacy ATKD device is also present and enabled eeepc_wmi: You probably booted with acpi_osi="Linux" or acpi_osi="!Windows 2009" eeepc_wmi: Can't load eeepc-wmi, use default acpi_osi (preferred) or eeepc-laptop eeepc-wmi: probe of eeepc-wmi failed with error -16 snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 snd_hda_codec_realtek hdaudioC0D0: inputs: snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 uvcvideo: Found UVC 1.00 device USB2.0 UVC 1.3M WebCam (13d3:5071) uvcvideo 1-7:1.0: Entity type for entity Extension 2 was not initialized! uvcvideo 1-7:1.0: Entity type for entity Processing 3 was not initialized! uvcvideo 1-7:1.0: Entity type for entity Camera 1 was not initialized! input: USB2.0 UVC 1.3M WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7:1.0/input/input9 usbcore: registered new interface driver uvcvideo USB Video Class driver (1.1.1) input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bluetooth: BNEP socket layer initialized ath: phy0: ASPM enabled: 0x42 ath: EEPROM regdomain: 0x60 ath: EEPROM indicates we should expect a direct regpair map ath: Country alpha2 being used: 00 ath: Regpair used: 0x60 ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf9920000, irq=17 ath9k 0000:01:00.0 wlp1s0: renamed from wlan0 EXT4-fs (sda1): re-mounted. Opts: nobarrier,noauto_da_alloc atl1c 0000:03:00.0: atl1c: enp3s0 NIC Link is Up<100 Mbps Full Duplex> NET: Registered protocol family 17