Takashi Iwai wrote:
Hector, does it work on your machine? If yes, there should be a slight difference between 6935G and 8930G...
Yes, the DMIC works fine here (in mono mode).
Karthik: please look in sound/pci/hda/patch_realtek.c and locate the alc889_acer_aspire_8930g_verbs array. At the end, where it talks about the "DMIC fix", find the last verb:
{0x20, AC_VERB_SET_PROC_COEF, 0x0003},
And change the value from 0x0003 to 0x0001 and see what that does.
If this works and you get some audio, make a stereo recording. You want both channels to be of equal volume.
I suspect you have a mono mic on the left channel. I have a stereo sum/difference mic (WTF) with sum on the right channel, so I tweaked the setting to replicate the right channel to both. This would kill your audio if your microphone is just a mono one on the left channel. Setting 0x0001 should get you standard stereo audio as it comes from the mic(s). I think setting 0x0002 should get you what you want (left channel replicated to both channels). If not, try setting 0x0000.
Takashi: if I'm right, we'll need two model entries instead of one and we should probably split off the verb array into three (base, stereo sum/dif mic fix, mono mic fix).