On Monday 14 July 2014 18:18:12 Lars-Peter Clausen wrote:
On 07/14/2014 05:46 PM, Arnd Bergmann wrote: [...]
+static struct gpiod_lookup_table smartq_audio_gpios = {
- .dev_id = "smartq-audio",
- .table = {
GPIO_LOOKUP("GPL", 12, "headphone detect", 0),GPIO_LOOKUP("GPK", 12, "amplifiers shutdown", GPIO_ACTIVE_HIGH),There is no such thing as GPIO_ACTIVE_HIGH, just 0 for flags.
The original driver does gpio_direction_output(..., 1);
For some reason I earlier concluded that this was what the '1' would need to get converted to. Are you sure '0' is correct then?
Yes. But now that you say it the gpiod_direction_output() call is missing from this patch.
I'm lost now. The GPIO_ACTIVE_HIGH I added comes from Documentation/gpio/board.txt and as Linus Walleij explained to me the other day, the lookup is supposed to replace devm_gpio_request_one(), which in turn replaced both the gpio_request and the gpio_direction_output(). Do I need to put the gpiod_direction_output() back or is there another interface for that when registering the board gpios?
Arnd