From: Ben Dooks ben@simtec.co.uk
Add the initial code to support the S3C64XX I2S hardware using the s3c-i2s-v2 core code.
Signed-off-by: Ben Dooks ben@simtec.co.uk
Index: linux.git/sound/soc/s3c24xx/Makefile =================================================================== --- linux.git.orig/sound/soc/s3c24xx/Makefile 2009-03-04 00:44:28.000000000 +0000 +++ linux.git/sound/soc/s3c24xx/Makefile 2009-03-04 00:56:40.000000000 +0000 @@ -2,6 +2,7 @@ snd-soc-s3c24xx-objs := s3c24xx-pcm.o snd-soc-s3c24xx-i2s-objs := s3c24xx-i2s.o snd-soc-s3c2412-i2s-objs := s3c2412-i2s.o +snd-soc-s3c64xx-i2s-objs := s3c64xx-i2s.o snd-soc-s3c2443-ac97-objs := s3c2443-ac97.o snd-soc-s3c-i2s-v2-objs := s3c-i2s-v2.o
@@ -9,6 +10,7 @@ obj-$(CONFIG_SND_S3C24XX_SOC) += snd-soc obj-$(CONFIG_SND_S3C24XX_SOC_I2S) += snd-soc-s3c24xx-i2s.o obj-$(CONFIG_SND_S3C2443_SOC_AC97) += snd-soc-s3c2443-ac97.o obj-$(CONFIG_SND_S3C2412_SOC_I2S) += snd-soc-s3c2412-i2s.o +obj-$(CONFIG_SND_S3C64XX_SOC_I2S) += snd-soc-s3c64xx-i2s.o obj-$(CONFIG_SND_S3C_I2SV2_SOC) += snd-soc-s3c-i2s-v2.o
# S3C24XX Machine Support Index: linux.git/sound/soc/s3c24xx/s3c64xx-i2s.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 +++ linux.git/sound/soc/s3c24xx/s3c64xx-i2s.c 2009-03-04 00:58:09.000000000 +0000 @@ -0,0 +1,223 @@ +/* sound/soc/s3c24xx/s3c64xx-i2s.c + * + * ALSA SoC Audio Layer - S3C64XX I2S driver + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks ben@simtec.co.uk + * http://armlinux.simtec.co.uk/ + * + * Based on s3c24xx-i2s.c and s3c-i2c-v2.c + * (c) 2006 Wolfson Microelectronics PLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/kernel.h> +#include <linux/gpio.h> +#include <linux/io.h> + +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/initval.h> +#include <sound/soc.h> + +#include <plat/regs-s3c2412-iis.h> +#include <plat/gpio-bank-d.h> +#include <plat/gpio-bank-e.h> +#include <plat/gpio-cfg.h> +#include <plat/audio.h> + +#include <mach/map.h> +#include <mach/dma.h> + +#include "s3c24xx-pcm.h" +#include "s3c64xx-i2s.h" + +static struct s3c2410_dma_client s3c64xx_dma_client_out = { + .name = "I2S PCM Stereo out" +}; + +static struct s3c2410_dma_client s3c64xx_dma_client_in = { + .name = "I2S PCM Stereo in" +}; + +static struct s3c24xx_pcm_dma_params s3c64xx_i2s_pcm_stereo_out[2] = { + [0] = { + .channel = DMACH_I2S0_OUT, + .client = &s3c64xx_dma_client_out, + .dma_addr = S3C64XX_PA_IIS0 + S3C2412_IISTXD, + .dma_size = 4, + }, + [1] = { + .channel = DMACH_I2S1_OUT, + .client = &s3c64xx_dma_client_out, + .dma_addr = S3C64XX_PA_IIS1 + S3C2412_IISTXD, + .dma_size = 4, + }, +}; + +static struct s3c24xx_pcm_dma_params s3c64xx_i2s_pcm_stereo_in[2] = { + [0] = { + .channel = DMACH_I2S0_IN, + .client = &s3c64xx_dma_client_in, + .dma_addr = S3C64XX_PA_IIS0 + S3C2412_IISRXD, + .dma_size = 4, + }, + [1] = { + .channel = DMACH_I2S1_IN, + .client = &s3c64xx_dma_client_in, + .dma_addr = S3C64XX_PA_IIS1 + S3C2412_IISRXD, + .dma_size = 4, + }, +}; + +static struct s3c_i2sv2_info s3c64xx_i2s[2]; + +static inline struct s3c_i2sv2_info *to_info(struct snd_soc_dai *cpu_dai) +{ + return cpu_dai->private_data; +} + +static int s3c64xx_i2s_set_sysclk(struct snd_soc_dai *cpu_dai, + int clk_id, unsigned int freq, int dir) +{ + struct s3c_i2sv2_info *i2s = to_info(cpu_dai); + u32 iismod = readl(i2s->regs + S3C2412_IISMOD); + + switch (clk_id) { + case S3C64XX_CLKSRC_PCLK: + iismod &= ~S3C64XX_IISMOD_IMS_SYSMUX; + break; + + case S3C64XX_CLKSRC_MUX: + iismod |= S3C64XX_IISMOD_IMS_SYSMUX; + break; + + default: + return -EINVAL; + } + + writel(iismod, i2s->regs + S3C2412_IISMOD); + + return 0; +} + + +unsigned long s3c64xx_i2s_get_clockrate(struct snd_soc_dai *dai) +{ + struct s3c_i2sv2_info *i2s = to_info(dai); + + return clk_get_rate(i2s->iis_cclk); +} +EXPORT_SYMBOL_GPL(s3c64xx_i2s_get_clockrate); + +static int s3c64xx_i2s_probe(struct platform_device *pdev, + struct snd_soc_dai *dai) +{ + struct device *dev = &pdev->dev; + struct s3c_i2sv2_info *i2s; + int ret; + + dev_dbg(dev, "%s: probing dai %d\n", __func__, pdev->id); + + if (pdev->id < 0 || pdev->id > ARRAY_SIZE(s3c64xx_i2s)) { + dev_err(dev, "id %d out of range\n", pdev->id); + return -EINVAL; + } + + i2s = &s3c64xx_i2s[pdev->id]; + + ret = s3c_i2sv2_probe(pdev, dai, i2s, + pdev->id ? S3C64XX_PA_IIS1 : S3C64XX_PA_IIS0); + if (ret) + return ret; + + i2s->dma_capture = &s3c64xx_i2s_pcm_stereo_in[pdev->id]; + i2s->dma_playback = &s3c64xx_i2s_pcm_stereo_out[pdev->id]; + + i2s->iis_cclk = clk_get(dev, "audio-bus"); + if (IS_ERR(i2s->iis_cclk)) { + dev_err(dev, "failed to get audio-bus"); + iounmap(i2s->regs); + return -ENODEV; + } + + /* configure GPIO for i2s port */ + switch (pdev->id) { + case 0: + s3c_gpio_cfgpin(S3C64XX_GPD(0), S3C64XX_GPD0_I2S0_CLK); + s3c_gpio_cfgpin(S3C64XX_GPD(1), S3C64XX_GPD1_I2S0_CDCLK); + s3c_gpio_cfgpin(S3C64XX_GPD(2), S3C64XX_GPD2_I2S0_LRCLK); + s3c_gpio_cfgpin(S3C64XX_GPD(3), S3C64XX_GPD3_I2S0_DI); + s3c_gpio_cfgpin(S3C64XX_GPD(4), S3C64XX_GPD4_I2S0_D0); + break; + case 1: + s3c_gpio_cfgpin(S3C64XX_GPE(0), S3C64XX_GPE0_I2S1_CLK); + s3c_gpio_cfgpin(S3C64XX_GPE(1), S3C64XX_GPE1_I2S1_CDCLK); + s3c_gpio_cfgpin(S3C64XX_GPE(2), S3C64XX_GPE2_I2S1_LRCLK); + s3c_gpio_cfgpin(S3C64XX_GPE(3), S3C64XX_GPE3_I2S1_DI); + s3c_gpio_cfgpin(S3C64XX_GPE(4), S3C64XX_GPE4_I2S1_D0); + } + + return 0; +} + + +#define S3C64XX_I2S_RATES \ + (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | SNDRV_PCM_RATE_16000 | \ + SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \ + SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000) + +#define S3C64XX_I2S_FMTS \ + (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE) + +struct snd_soc_dai s3c64xx_i2s_dai = { + .name = "s3c64xx-i2s", + .id = 0, + .probe = s3c64xx_i2s_probe, + .playback = { + .channels_min = 2, + .channels_max = 2, + .rates = S3C64XX_I2S_RATES, + .formats = S3C64XX_I2S_FMTS, + }, + .capture = { + .channels_min = 2, + .channels_max = 2, + .rates = S3C64XX_I2S_RATES, + .formats = S3C64XX_I2S_FMTS, + }, + .ops = { + .set_sysclk = s3c64xx_i2s_set_sysclk, + }, +}; +EXPORT_SYMBOL_GPL(s3c64xx_i2s_dai); + +static int __init s3c64xx_i2s_init(void) +{ + return s3c_i2sv2_register_dai(&s3c64xx_i2s_dai); +} +module_init(s3c64xx_i2s_init); + +static void __exit s3c64xx_i2s_exit(void) +{ + snd_soc_unregister_dai(&s3c64xx_i2s_dai); +} +module_exit(s3c64xx_i2s_exit); + +/* Module information */ +MODULE_AUTHOR("Ben Dooks, ben@simtec.co.uk"); +MODULE_DESCRIPTION("S3C64XX I2S SoC Interface"); +MODULE_LICENSE("GPL"); + + + Index: linux.git/sound/soc/s3c24xx/s3c64xx-i2s.h =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 +++ linux.git/sound/soc/s3c24xx/s3c64xx-i2s.h 2009-03-04 00:44:31.000000000 +0000 @@ -0,0 +1,31 @@ +/* sound/soc/s3c24xx/s3c64xx-i2s.h + * + * ALSA SoC Audio Layer - S3C64XX I2S driver + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks ben@simtec.co.uk + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __SND_SOC_S3C24XX_S3C64XX_I2S_H +#define __SND_SOC_S3C24XX_S3C64XX_I2S_H __FILE__ + +#include "s3c-i2s-v2.h" + +#define S3C64XX_DIV_BCLK S3C_I2SV2_DIV_BCLK +#define S3C64XX_DIV_RCLK S3C_I2SV2_DIV_RCLK +#define S3C64XX_DIV_PRESCALER S3C_I2SV2_DIV_PRESCALER + +#define S3C64XX_CLKSRC_PCLK (0) +#define S3C64XX_CLKSRC_MUX (1) + +extern struct snd_soc_dai s3c64xx_i2s_dai; + +extern unsigned long s3c64xx_i2s_get_clockrate(struct snd_soc_dai *cpu_dai); + +#endif /* __SND_SOC_S3C24XX_S3C64XX_I2S_H */ Index: linux.git/sound/soc/s3c24xx/Kconfig =================================================================== --- linux.git.orig/sound/soc/s3c24xx/Kconfig 2009-03-04 00:44:28.000000000 +0000 +++ linux.git/sound/soc/s3c24xx/Kconfig 2009-03-04 00:56:40.000000000 +0000 @@ -1,6 +1,6 @@ config SND_S3C24XX_SOC tristate "SoC Audio for the Samsung S3C24XX chips" - depends on ARCH_S3C2410 + depends on ARCH_S3C2410 || ARCH_S3C64XX help Say Y or M if you want to add support for codecs attached to the S3C24XX AC97, I2S or SSP interface. You will also need @@ -16,6 +16,10 @@ config SND_S3C2412_SOC_I2S tristate select SND_S3C_I2SV2_SOC
+config SND_S3C64XX_SOC_I2S + tristate + select SND_S3C_I2SV2_SOC + config SND_S3C2443_SOC_AC97 tristate select AC97_BUS Index: linux.git/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h =================================================================== --- linux.git.orig/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h 2009-03-04 00:44:10.000000000 +0000 +++ linux.git/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h 2009-03-04 00:44:31.000000000 +0000 @@ -33,6 +33,9 @@ #define S3C2412_IISCON_RXDMA_ACTIVE (1 << 1) #define S3C2412_IISCON_IIS_ACTIVE (1 << 0)
+#define S3C64XX_IISMOD_IMS_PCLK (0 << 10) +#define S3C64XX_IISMOD_IMS_SYSMUX (1 << 10) + #define S3C2412_IISMOD_MASTER_INTERNAL (0 << 10) #define S3C2412_IISMOD_MASTER_EXTERNAL (1 << 10) #define S3C2412_IISMOD_SLAVE (2 << 10)