From: Russell Parker russell.parker7@gmail.com
The Lenovo Ideapad Miix 320, Asus T100HA, and chtrt5645 mono variant UCM configurations have not been updated to make use of the shared bytcr/PlatfromEnableSeq.conf sequence. This commit deletes those command sequences and loads the shared component directly.
Signed-off-by: Russell Parker russell.parker7@gmail.com
diff --git a/src/conf/ucm/ASUSTeKCOMPUTERINC.-T100HAN-1.0-T100HAN/HiFi.conf b/src/conf/ucm/ASUSTeKCOMPUTERINC.-T100HAN-1.0-T100HAN/HiFi.conf index 78bf9823..61848358 100644 --- a/src/conf/ucm/ASUSTeKCOMPUTERINC.-T100HAN-1.0-T100HAN/HiFi.conf +++ b/src/conf/ucm/ASUSTeKCOMPUTERINC.-T100HAN-1.0-T100HAN/HiFi.conf @@ -11,121 +11,7 @@ SectionVerb { EnableSequence [ cdev "hw:chtrt5645"
- # media mixer settings - # compress - cset "name='media0_in Gain 0 Switch' on" - cset "name='media0_in Gain 0 Volume' 0" - - # normal - cset "name='media1_in Gain 0 Switch' on" - cset "name='media1_in Gain 0 Volume' 0" - # swm loopback - cset "name='media2_in Gain 0 Switch' off" - cset "name='media2_in Gain 0 Volume' 0%" - # deep buffer - cset "name='media3_in Gain 0 Switch' on" - cset "name='media3_in Gain 0 Volume' 0" - - cset "name='media0_out mix 0 media0_in Switch' on" - cset "name='media0_out mix 0 media1_in Switch' on" - cset "name='media0_out mix 0 media2_in Switch' off" - cset "name='media0_out mix 0 media3_in Switch' on" - - cset "name='media1_out mix 0 media0_in Switch' off" - cset "name='media1_out mix 0 media1_in Switch' off" - cset "name='media1_out mix 0 media2_in Switch' off" - cset "name='media1_out mix 0 media3_in Switch' off" - - cset "name='pcm0_in Gain 0 Switch' on" - cset "name='pcm0_in Gain 0 Volume' 0" - - cset "name='pcm1_in Gain 0 Switch' off" - cset "name='pcm1_in Gain 0 Volume' 0%" - - # codec0_out settings (used if ssp2 is connected to aif1) - cset "name='codec_out0 mix 0 codec_in0 Switch' off" - cset "name='codec_out0 mix 0 codec_in1 Switch' off" - cset "name='codec_out0 mix 0 media_loop1_in Switch' off" - cset "name='codec_out0 mix 0 media_loop2_in Switch' off" - cset "name='codec_out0 mix 0 pcm0_in Switch' on" - cset "name='codec_out0 mix 0 pcm1_in Switch' off" - cset "name='codec_out0 mix 0 sprot_loop_in Switch' off" - cset "name='codec_out0 Gain 0 Switch' on" - cset "name='codec_out0 Gain 0 Volume' 0" - - # modem_out settings (used if ssp0 is connected to aif2) - cset "name='modem_out mix 0 codec_in0 Switch' off" - cset "name='modem_out mix 0 codec_in1 Switch' off" - cset "name='modem_out mix 0 media_loop1_in Switch' off" - cset "name='modem_out mix 0 media_loop2_in Switch' off" - cset "name='modem_out mix 0 pcm0_in Switch' on" - cset "name='modem_out mix 0 pcm1_in Switch' off" - cset "name='modem_out mix 0 sprot_loop_in Switch' off" - cset "name='modem_out Gain 0 Switch' on" - cset "name='modem_out Gain 0 Volume' 0" - - # input settings - # pcm1_out settings - - # input used when SSP2 is connected - cset "name='codec_in0 Gain 0 Switch' on" - cset "name='codec_in0 Gain 0 Volume' 0" - - # input used when SSP0 is connected - cset "name='modem_in Gain 0 Switch' on" - cset "name='modem_in Gain 0 Volume' 0" - - cset "name='pcm1_out mix 0 codec_in0 Switch' on" - cset "name='pcm1_out mix 0 modem_in Switch' on" - cset "name='pcm1_out mix 0 codec_in1 Switch' off" - cset "name='pcm1_out mix 0 media_loop1_in Switch' off" - cset "name='pcm1_out mix 0 media_loop2_in Switch' off" - cset "name='pcm1_out mix 0 pcm0_in Switch' off" - cset "name='pcm1_out mix 0 pcm1_in Switch' off" - cset "name='pcm1_out mix 0 sprot_loop_in Switch' off" - - cset "name='pcm1_out Gain 0 Switch' on" - cset "name='pcm1_out Gain 0 Volume' 0" - - # disable codec_out1 - cset "name='codec_out1 mix 0 codec_in0 Switch' off" - cset "name='codec_out1 mix 0 codec_in1 Switch' off" - cset "name='codec_out1 mix 0 media_loop1_in Switch' off" - cset "name='codec_out1 mix 0 media_loop2_in Switch' off" - cset "name='codec_out1 mix 0 pcm0_in Switch' off" - cset "name='codec_out1 mix 0 pcm1_in Switch' off" - cset "name='codec_out1 mix 0 sprot_loop_in Switch' off" - cset "name='codec_out1 Gain 0 Switch' off" - cset "name='codec_out1 Gain 0 Volume' 0%" - - # disable codec_in1 - cset "name='codec_in1 Gain 0 Switch' off" - cset "name='codec_in1 Gain 0 Volume' 0%" - - # disable all loops - cset "name='media_loop1_out mix 0 codec_in0 Switch' off" - cset "name='media_loop1_out mix 0 codec_in1 Switch' off" - cset "name='media_loop1_out mix 0 media_loop1_in Switch' off" - cset "name='media_loop1_out mix 0 media_loop2_in Switch' off" - cset "name='media_loop1_out mix 0 pcm0_in Switch' off" - cset "name='media_loop1_out mix 0 pcm1_in Switch' off" - cset "name='media_loop1_out mix 0 sprot_loop_in Switch' off" - - cset "name='media_loop2_out mix 0 codec_in0 Switch' off" - cset "name='media_loop2_out mix 0 codec_in1 Switch' off" - cset "name='media_loop2_out mix 0 media_loop1_in Switch' off" - cset "name='media_loop2_out mix 0 media_loop2_in Switch' off" - cset "name='media_loop2_out mix 0 pcm0_in Switch' off" - cset "name='media_loop2_out mix 0 pcm1_in Switch' off" - cset "name='media_loop2_out mix 0 sprot_loop_in Switch' off" - - cset "name='sprot_loop_out mix 0 codec_in0 Switch' off" - cset "name='sprot_loop_out mix 0 codec_in1 Switch' off" - cset "name='sprot_loop_out mix 0 media_loop1_in Switch' off" - cset "name='sprot_loop_out mix 0 media_loop2_in Switch' off" - cset "name='sprot_loop_out mix 0 pcm0_in Switch' off" - cset "name='sprot_loop_out mix 0 pcm1_in Switch' off" - cset "name='sprot_loop_out mix 0 sprot_loop_in Switch' off" + <platforms/bytcr/PlatformEnableSeq.conf>
# Output Configuration cset "name='DAC1 L Mux' IF1 DAC" diff --git a/src/conf/ucm/LENOVO-80XF-LenovoMIIX320_10ICR-LNVNB161216/HiFi.conf b/src/conf/ucm/LENOVO-80XF-LenovoMIIX320_10ICR-LNVNB161216/HiFi.conf index 8cc9c7f2..d043f685 100644 --- a/src/conf/ucm/LENOVO-80XF-LenovoMIIX320_10ICR-LNVNB161216/HiFi.conf +++ b/src/conf/ucm/LENOVO-80XF-LenovoMIIX320_10ICR-LNVNB161216/HiFi.conf @@ -11,121 +11,7 @@ SectionVerb { EnableSequence [ cdev "hw:chtrt5645"
- # media mixer settings - # compress - cset "name='media0_in Gain 0 Switch' on" - cset "name='media0_in Gain 0 Volume' 0" - - # normal - cset "name='media1_in Gain 0 Switch' on" - cset "name='media1_in Gain 0 Volume' 0" - # swm loopback - cset "name='media2_in Gain 0 Switch' off" - cset "name='media2_in Gain 0 Volume' 0%" - # deep buffer - cset "name='media3_in Gain 0 Switch' on" - cset "name='media3_in Gain 0 Volume' 0" - - cset "name='media0_out mix 0 media0_in Switch' on" - cset "name='media0_out mix 0 media1_in Switch' on" - cset "name='media0_out mix 0 media2_in Switch' off" - cset "name='media0_out mix 0 media3_in Switch' on" - - cset "name='media1_out mix 0 media0_in Switch' off" - cset "name='media1_out mix 0 media1_in Switch' off" - cset "name='media1_out mix 0 media2_in Switch' off" - cset "name='media1_out mix 0 media3_in Switch' off" - - cset "name='pcm0_in Gain 0 Switch' on" - cset "name='pcm0_in Gain 0 Volume' 0" - - cset "name='pcm1_in Gain 0 Switch' off" - cset "name='pcm1_in Gain 0 Volume' 0%" - - # codec0_out settings (used if ssp2 is connected to aif1) - cset "name='codec_out0 mix 0 codec_in0 Switch' off" - cset "name='codec_out0 mix 0 codec_in1 Switch' off" - cset "name='codec_out0 mix 0 media_loop1_in Switch' off" - cset "name='codec_out0 mix 0 media_loop2_in Switch' off" - cset "name='codec_out0 mix 0 pcm0_in Switch' on" - cset "name='codec_out0 mix 0 pcm1_in Switch' off" - cset "name='codec_out0 mix 0 sprot_loop_in Switch' off" - cset "name='codec_out0 Gain 0 Switch' on" - cset "name='codec_out0 Gain 0 Volume' 0" - - # modem_out settings (used if ssp0 is connected to aif2) - cset "name='modem_out mix 0 codec_in0 Switch' off" - cset "name='modem_out mix 0 codec_in1 Switch' off" - cset "name='modem_out mix 0 media_loop1_in Switch' off" - cset "name='modem_out mix 0 media_loop2_in Switch' off" - cset "name='modem_out mix 0 pcm0_in Switch' on" - cset "name='modem_out mix 0 pcm1_in Switch' off" - cset "name='modem_out mix 0 sprot_loop_in Switch' off" - cset "name='modem_out Gain 0 Switch' on" - cset "name='modem_out Gain 0 Volume' 0" - - # input settings - # pcm1_out settings - - # input used when SSP2 is connected - cset "name='codec_in0 Gain 0 Switch' on" - cset "name='codec_in0 Gain 0 Volume' 0" - - # input used when SSP0 is connected - cset "name='modem_in Gain 0 Switch' on" - cset "name='modem_in Gain 0 Volume' 0" - - cset "name='pcm1_out mix 0 codec_in0 Switch' on" - cset "name='pcm1_out mix 0 modem_in Switch' on" - cset "name='pcm1_out mix 0 codec_in1 Switch' off" - cset "name='pcm1_out mix 0 media_loop1_in Switch' off" - cset "name='pcm1_out mix 0 media_loop2_in Switch' off" - cset "name='pcm1_out mix 0 pcm0_in Switch' off" - cset "name='pcm1_out mix 0 pcm1_in Switch' off" - cset "name='pcm1_out mix 0 sprot_loop_in Switch' off" - - cset "name='pcm1_out Gain 0 Switch' on" - cset "name='pcm1_out Gain 0 Volume' 0" - - # disable codec_out1 - cset "name='codec_out1 mix 0 codec_in0 Switch' off" - cset "name='codec_out1 mix 0 codec_in1 Switch' off" - cset "name='codec_out1 mix 0 media_loop1_in Switch' off" - cset "name='codec_out1 mix 0 media_loop2_in Switch' off" - cset "name='codec_out1 mix 0 pcm0_in Switch' off" - cset "name='codec_out1 mix 0 pcm1_in Switch' off" - cset "name='codec_out1 mix 0 sprot_loop_in Switch' off" - cset "name='codec_out1 Gain 0 Switch' off" - cset "name='codec_out1 Gain 0 Volume' 0%" - - # disable codec_in1 - cset "name='codec_in1 Gain 0 Switch' off" - cset "name='codec_in1 Gain 0 Volume' 0%" - - # disable all loops - cset "name='media_loop1_out mix 0 codec_in0 Switch' off" - cset "name='media_loop1_out mix 0 codec_in1 Switch' off" - cset "name='media_loop1_out mix 0 media_loop1_in Switch' off" - cset "name='media_loop1_out mix 0 media_loop2_in Switch' off" - cset "name='media_loop1_out mix 0 pcm0_in Switch' off" - cset "name='media_loop1_out mix 0 pcm1_in Switch' off" - cset "name='media_loop1_out mix 0 sprot_loop_in Switch' off" - - cset "name='media_loop2_out mix 0 codec_in0 Switch' off" - cset "name='media_loop2_out mix 0 codec_in1 Switch' off" - cset "name='media_loop2_out mix 0 media_loop1_in Switch' off" - cset "name='media_loop2_out mix 0 media_loop2_in Switch' off" - cset "name='media_loop2_out mix 0 pcm0_in Switch' off" - cset "name='media_loop2_out mix 0 pcm1_in Switch' off" - cset "name='media_loop2_out mix 0 sprot_loop_in Switch' off" - - cset "name='sprot_loop_out mix 0 codec_in0 Switch' off" - cset "name='sprot_loop_out mix 0 codec_in1 Switch' off" - cset "name='sprot_loop_out mix 0 media_loop1_in Switch' off" - cset "name='sprot_loop_out mix 0 media_loop2_in Switch' off" - cset "name='sprot_loop_out mix 0 pcm0_in Switch' off" - cset "name='sprot_loop_out mix 0 pcm1_in Switch' off" - cset "name='sprot_loop_out mix 0 sprot_loop_in Switch' off" + <platforms/bytcr/PlatformEnableSeq.conf>
# Output Configuration cset "name='DAC1 L Mux' IF1 DAC" diff --git a/src/conf/ucm/chtrt5645-mono-speaker-analog-mic/HiFi.conf b/src/conf/ucm/chtrt5645-mono-speaker-analog-mic/HiFi.conf index 7a0cd51c..c4452a4e 100644 --- a/src/conf/ucm/chtrt5645-mono-speaker-analog-mic/HiFi.conf +++ b/src/conf/ucm/chtrt5645-mono-speaker-analog-mic/HiFi.conf @@ -11,121 +11,7 @@ SectionVerb { EnableSequence [ cdev "hw:chtrt5645"
- # media mixer settings - # compress - cset "name='media0_in Gain 0 Switch' on" - cset "name='media0_in Gain 0 Volume' 0" - - # normal - cset "name='media1_in Gain 0 Switch' on" - cset "name='media1_in Gain 0 Volume' 0" - # swm loopback - cset "name='media2_in Gain 0 Switch' off" - cset "name='media2_in Gain 0 Volume' 0%" - # deep buffer - cset "name='media3_in Gain 0 Switch' on" - cset "name='media3_in Gain 0 Volume' 0" - - cset "name='media0_out mix 0 media0_in Switch' on" - cset "name='media0_out mix 0 media1_in Switch' on" - cset "name='media0_out mix 0 media2_in Switch' off" - cset "name='media0_out mix 0 media3_in Switch' on" - - cset "name='media1_out mix 0 media0_in Switch' off" - cset "name='media1_out mix 0 media1_in Switch' off" - cset "name='media1_out mix 0 media2_in Switch' off" - cset "name='media1_out mix 0 media3_in Switch' off" - - cset "name='pcm0_in Gain 0 Switch' on" - cset "name='pcm0_in Gain 0 Volume' 0" - - cset "name='pcm1_in Gain 0 Switch' off" - cset "name='pcm1_in Gain 0 Volume' 0%" - - # codec0_out settings (used if ssp2 is connected to aif1) - cset "name='codec_out0 mix 0 codec_in0 Switch' off" - cset "name='codec_out0 mix 0 codec_in1 Switch' off" - cset "name='codec_out0 mix 0 media_loop1_in Switch' off" - cset "name='codec_out0 mix 0 media_loop2_in Switch' off" - cset "name='codec_out0 mix 0 pcm0_in Switch' on" - cset "name='codec_out0 mix 0 pcm1_in Switch' off" - cset "name='codec_out0 mix 0 sprot_loop_in Switch' off" - cset "name='codec_out0 Gain 0 Switch' on" - cset "name='codec_out0 Gain 0 Volume' 0" - - # modem_out settings (used if ssp0 is connected to aif2) - cset "name='modem_out mix 0 codec_in0 Switch' off" - cset "name='modem_out mix 0 codec_in1 Switch' off" - cset "name='modem_out mix 0 media_loop1_in Switch' off" - cset "name='modem_out mix 0 media_loop2_in Switch' off" - cset "name='modem_out mix 0 pcm0_in Switch' on" - cset "name='modem_out mix 0 pcm1_in Switch' off" - cset "name='modem_out mix 0 sprot_loop_in Switch' off" - cset "name='modem_out Gain 0 Switch' on" - cset "name='modem_out Gain 0 Volume' 0" - - # input settings - # pcm1_out settings - - # input used when SSP2 is connected - cset "name='codec_in0 Gain 0 Switch' on" - cset "name='codec_in0 Gain 0 Volume' 0" - - # input used when SSP0 is connected - cset "name='modem_in Gain 0 Switch' on" - cset "name='modem_in Gain 0 Volume' 0" - - cset "name='pcm1_out mix 0 codec_in0 Switch' on" - cset "name='pcm1_out mix 0 modem_in Switch' on" - cset "name='pcm1_out mix 0 codec_in1 Switch' off" - cset "name='pcm1_out mix 0 media_loop1_in Switch' off" - cset "name='pcm1_out mix 0 media_loop2_in Switch' off" - cset "name='pcm1_out mix 0 pcm0_in Switch' off" - cset "name='pcm1_out mix 0 pcm1_in Switch' off" - cset "name='pcm1_out mix 0 sprot_loop_in Switch' off" - - cset "name='pcm1_out Gain 0 Switch' on" - cset "name='pcm1_out Gain 0 Volume' 0" - - # disable codec_out1 - cset "name='codec_out1 mix 0 codec_in0 Switch' off" - cset "name='codec_out1 mix 0 codec_in1 Switch' off" - cset "name='codec_out1 mix 0 media_loop1_in Switch' off" - cset "name='codec_out1 mix 0 media_loop2_in Switch' off" - cset "name='codec_out1 mix 0 pcm0_in Switch' off" - cset "name='codec_out1 mix 0 pcm1_in Switch' off" - cset "name='codec_out1 mix 0 sprot_loop_in Switch' off" - cset "name='codec_out1 Gain 0 Switch' off" - cset "name='codec_out1 Gain 0 Volume' 0%" - - # disable codec_in1 - cset "name='codec_in1 Gain 0 Switch' off" - cset "name='codec_in1 Gain 0 Volume' 0%" - - # disable all loops - cset "name='media_loop1_out mix 0 codec_in0 Switch' off" - cset "name='media_loop1_out mix 0 codec_in1 Switch' off" - cset "name='media_loop1_out mix 0 media_loop1_in Switch' off" - cset "name='media_loop1_out mix 0 media_loop2_in Switch' off" - cset "name='media_loop1_out mix 0 pcm0_in Switch' off" - cset "name='media_loop1_out mix 0 pcm1_in Switch' off" - cset "name='media_loop1_out mix 0 sprot_loop_in Switch' off" - - cset "name='media_loop2_out mix 0 codec_in0 Switch' off" - cset "name='media_loop2_out mix 0 codec_in1 Switch' off" - cset "name='media_loop2_out mix 0 media_loop1_in Switch' off" - cset "name='media_loop2_out mix 0 media_loop2_in Switch' off" - cset "name='media_loop2_out mix 0 pcm0_in Switch' off" - cset "name='media_loop2_out mix 0 pcm1_in Switch' off" - cset "name='media_loop2_out mix 0 sprot_loop_in Switch' off" - - cset "name='sprot_loop_out mix 0 codec_in0 Switch' off" - cset "name='sprot_loop_out mix 0 codec_in1 Switch' off" - cset "name='sprot_loop_out mix 0 media_loop1_in Switch' off" - cset "name='sprot_loop_out mix 0 media_loop2_in Switch' off" - cset "name='sprot_loop_out mix 0 pcm0_in Switch' off" - cset "name='sprot_loop_out mix 0 pcm1_in Switch' off" - cset "name='sprot_loop_out mix 0 sprot_loop_in Switch' off" + <platforms/bytcr/PlatformEnableSeq.conf>
# Output Configuration cset "name='DAC1 L Mux' IF1 DAC" diff --git a/src/conf/ucm/platforms/bytcr/PlatformEnableSeq.conf b/src/conf/ucm/platforms/bytcr/PlatformEnableSeq.conf index b5ee2b41..6f5e899c 100644 --- a/src/conf/ucm/platforms/bytcr/PlatformEnableSeq.conf +++ b/src/conf/ucm/platforms/bytcr/PlatformEnableSeq.conf @@ -29,7 +29,7 @@ cset "name='pcm0_in Gain 0 Volume' 0" cset "name='pcm1_in Gain 0 Switch' off" cset "name='pcm1_in Gain 0 Volume' 0%"
-# codec0_out settings (used if SSP2 is connected) +# codec0_out settings (used if SSP2 is connected to aif1) cset "name='codec_out0 mix 0 codec_in0 Switch' off" cset "name='codec_out0 mix 0 codec_in1 Switch' off" cset "name='codec_out0 mix 0 media_loop1_in Switch' off" @@ -40,7 +40,7 @@ cset "name='codec_out0 mix 0 sprot_loop_in Switch' off" cset "name='codec_out0 Gain 0 Switch' on" cset "name='codec_out0 Gain 0 Volume' 0"
-# modem_out settings (used if SSP0 is connected) +# modem_out settings (used if SSP0 is connected to aif2) cset "name='modem_out mix 0 codec_in0 Switch' off" cset "name='modem_out mix 0 codec_in1 Switch' off" cset "name='modem_out mix 0 media_loop1_in Switch' off"