This is the initial imx-sgtl5000 machine driver support with only playback dai link implemented. More features can be added on top of it later.
It's a device tree only machine driver working with fsl_ssi driver.
Signed-off-by: Shawn Guo shawn.guo@linaro.org --- .../bindings/sound/imx-audio-sgtl5000.txt | 24 +++ sound/soc/fsl/Kconfig | 12 ++ sound/soc/fsl/Makefile | 2 + sound/soc/fsl/imx-sgtl5000.c | 177 ++++++++++++++++++++ 4 files changed, 215 insertions(+), 0 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt create mode 100644 sound/soc/fsl/imx-sgtl5000.c
diff --git a/Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt b/Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt new file mode 100644 index 0000000..421a374 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt @@ -0,0 +1,24 @@ +Freescale i.MX audio complex with SGTL5000 codec + +Required properties: +- compatible : "fsl,imx-audio-sgtl5000" +- model : The user-visible name of this sound complex +- ssi-controller : The phandle of the i.MX SSI controller +- audio-codec : The phandle of the SGTL5000 audio codec +- mux-int-port : The internal port of the i.MX audio muxer (AUDMUX) +- mux-ext-port : The external port of the i.MX audio muxer + +Note: The AUDMUX port numbering should start at 1, which is consistent with +hardware manual. + +Example: + +sound { + compatible = "fsl,imx51-babbage-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "imx51-babbage-sgtl5000"; + ssi-controller = <&ssi1>; + audio-codec = <&sgtl5000>; + mux-int-port = <1>; + mux-ext-port = <3>; +}; diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig index 535ee73..aa14fc9 100644 --- a/sound/soc/fsl/Kconfig +++ b/sound/soc/fsl/Kconfig @@ -164,4 +164,16 @@ config SND_SOC_EUKREA_TLV320 Enable I2S based access to the TLV320AIC23B codec attached to the SSI interface
+config SND_SOC_IMX_SGTL5000 + tristate "SoC Audio support for i.MX boards with sgtl5000" + depends on OF && I2C + select SND_SOC_SGTL5000 + select SND_SOC_IMX_PCM_DMA + select SND_SOC_IMX_AUDMUX + select SND_SOC_FSL_SSI + select SND_SOC_FSL_UTILS + help + Say Y if you want to add support for SoC audio on an i.MX board with + a sgtl5000 codec. + endif # SND_IMX_SOC diff --git a/sound/soc/fsl/Makefile b/sound/soc/fsl/Makefile index fbdbed0..638d385 100644 --- a/sound/soc/fsl/Makefile +++ b/sound/soc/fsl/Makefile @@ -40,8 +40,10 @@ snd-soc-eukrea-tlv320-objs := eukrea-tlv320.o snd-soc-phycore-ac97-objs := phycore-ac97.o snd-soc-mx27vis-aic32x4-objs := mx27vis-aic32x4.o snd-soc-wm1133-ev1-objs := wm1133-ev1.o +snd-soc-imx-sgtl5000-objs := imx-sgtl5000.o
obj-$(CONFIG_SND_SOC_EUKREA_TLV320) += snd-soc-eukrea-tlv320.o obj-$(CONFIG_SND_SOC_PHYCORE_AC97) += snd-soc-phycore-ac97.o obj-$(CONFIG_SND_SOC_MX27VIS_AIC32X4) += snd-soc-mx27vis-aic32x4.o obj-$(CONFIG_SND_MXC_SOC_WM1133_EV1) += snd-soc-wm1133-ev1.o +obj-$(CONFIG_SND_SOC_IMX_SGTL5000) += snd-soc-imx-sgtl5000.o diff --git a/sound/soc/fsl/imx-sgtl5000.c b/sound/soc/fsl/imx-sgtl5000.c new file mode 100644 index 0000000..3786b61 --- /dev/null +++ b/sound/soc/fsl/imx-sgtl5000.c @@ -0,0 +1,177 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2012 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <sound/soc.h> + +#include "../codecs/sgtl5000.h" +#include "imx-audmux.h" + +#define DAI_NAME_SIZE 32 + +struct imx_sgtl5000_data { + struct snd_soc_dai_link dai; + struct snd_soc_card card; + char codec_dai_name[DAI_NAME_SIZE]; + char platform_name[DAI_NAME_SIZE]; + unsigned int clk_frequency; +}; + +static int imx_sgtl5000_dai_init(struct snd_soc_pcm_runtime *rtd) +{ + struct imx_sgtl5000_data *data = container_of(rtd->card, + struct imx_sgtl5000_data, card); + struct device *dev = rtd->card->dev; + int ret; + + ret = snd_soc_dai_set_sysclk(rtd->codec_dai, SGTL5000_SYSCLK, + data->clk_frequency, SND_SOC_CLOCK_IN); + if (ret) { + dev_err(dev, "could not set codec driver clock params\n"); + return ret; + } + + return 0; +} + +static int __devinit imx_sgtl5000_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct device_node *ssi_np, *codec_np; + struct platform_device *ssi_pdev; + struct imx_sgtl5000_data *data; + int int_port, ext_port; + int ret; + + ret = of_property_read_u32(np, "mux-int-port", &int_port); + if (ret) { + dev_err(&pdev->dev, "mux-int-port missing or invalid\n"); + return ret; + } + ret = of_property_read_u32(np, "mux-ext-port", &ext_port); + if (ret) { + dev_err(&pdev->dev, "mux-ext-port missing or invalid\n"); + return ret; + } + + /* + * The port numbering in the hardware manual starts at 1, while + * the audmux API expects it starts at 0. + */ + int_port--; + ext_port--; + ret = imx_audmux_v2_configure_port(int_port, + IMX_AUDMUX_V2_PTCR_SYN | + IMX_AUDMUX_V2_PTCR_TFSEL(ext_port) | + IMX_AUDMUX_V2_PTCR_TCSEL(ext_port) | + IMX_AUDMUX_V2_PTCR_TFSDIR | + IMX_AUDMUX_V2_PTCR_TCLKDIR, + IMX_AUDMUX_V2_PDCR_RXDSEL(ext_port)); + if (ret) { + dev_err(&pdev->dev, "audmux internal port setup failed\n"); + return ret; + } + imx_audmux_v2_configure_port(ext_port, + IMX_AUDMUX_V2_PTCR_SYN | + IMX_AUDMUX_V2_PTCR_TCSEL(int_port), + IMX_AUDMUX_V2_PDCR_RXDSEL(int_port)); + if (ret) { + dev_err(&pdev->dev, "audmux external port setup failed\n"); + return ret; + } + + ssi_np = of_parse_phandle(pdev->dev.of_node, "ssi-controller", 0); + codec_np = of_parse_phandle(pdev->dev.of_node, "audio-codec", 0); + if (!ssi_np || !codec_np) { + dev_err(&pdev->dev, "phandle missing or invalid\n"); + return -EINVAL; + } + + ssi_pdev = of_find_device_by_node(ssi_np); + if (!ssi_pdev) { + dev_err(&pdev->dev, "failed to find SSI platform device\n"); + return -EINVAL; + } + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + ret = of_property_read_u32(codec_np, "clock-frequency", + &data->clk_frequency); + if (ret) { + dev_err(&pdev->dev, "clock-frequency missing or invalid\n"); + return ret; + } + + data->dai.name = "HiFi"; + data->dai.stream_name = "HiFi"; + data->dai.codec_dai_name = "sgtl5000"; + data->dai.codec_of_node = codec_np; + data->dai.cpu_dai_name = dev_name(&ssi_pdev->dev); + data->dai.platform_name = "imx-pcm-audio"; + data->dai.init = &imx_sgtl5000_dai_init; + data->dai.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBM_CFM; + + data->card.dev = &pdev->dev; + ret = snd_soc_of_parse_card_name(&data->card, "model"); + if (ret) + return ret; + data->card.num_links = 1; + data->card.dai_link = &data->dai; + + ret = snd_soc_register_card(&data->card); + if (ret) { + dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n", ret); + return ret; + } + + platform_set_drvdata(pdev, data); + of_node_put(ssi_np); + of_node_put(codec_np); + + return 0; +} + +static int __devexit imx_sgtl5000_remove(struct platform_device *pdev) +{ + struct imx_sgtl5000_data *data = platform_get_drvdata(pdev); + + snd_soc_unregister_card(&data->card); + + return 0; +} + +static const struct of_device_id imx_sgtl5000_dt_ids[] = { + { .compatible = "fsl,imx-audio-sgtl5000", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, imx_sgtl5000_dt_ids); + +static struct platform_driver imx_sgtl5000_driver = { + .driver = { + .name = "imx-sgtl5000", + .owner = THIS_MODULE, + .of_match_table = imx_sgtl5000_dt_ids, + }, + .probe = imx_sgtl5000_probe, + .remove = __devexit_p(imx_sgtl5000_remove), +}; +module_platform_driver(imx_sgtl5000_driver); + +MODULE_AUTHOR("Shawn Guo shawn.guo@linaro.org"); +MODULE_DESCRIPTION("Freescale i.MX SGTL5000 ASoC machine driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:imx-sgtl5000");