Hi Clemens,
I can change value of this switch with alsamixer, but 96k is claimed maximum. Can I force 192k sample rate with some module parameter? What can I try?
Thank you very much!
Kind regards,
Milan
Here is alsa-info output:
http://www.alsa-project.org/db/?f=e806ab89935bc35b616ef74f8033dfab6c3240c6
and
migo@migo_lenovo:~$ pacmd list-sinks 1 sink(s) available. * index: 0 name: <alsa_output.usb-Creative_Technology_Ltd_Sound_BlasterX_G5_2800534752X-00.analog-stereo> driver: <module-alsa-card.c> flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY state: SUSPENDED suspend cause: IDLE priority: 9049 volume: front-left: 58369 / 89% / -3,02 dB, front-right: 58369 / 89% / -3,02 dB balance 0,00 base volume: 65536 / 100% / 0,00 dB volume steps: 65537 muted: no current latency: 0,00 ms max request: 0 KiB max rewind: 0 KiB monitor source: 0 sample spec: s24le 2ch 96000Hz channel map: front-left,front-right Stereo used by: 0 linked by: 0 configured latency: 0,00 ms; range is 0,50 .. 1820,44 ms card: 0 <alsa_card.usb-Creative_Technology_Ltd_Sound_BlasterX_G5_2800534752X-00> module: 6 properties: alsa.resolution_bits = "24" device.api = "alsa" device.class = "sound" alsa.class = "generic" alsa.subclass = "generic-mix" alsa.name = "USB Audio" alsa.id = "USB Audio" alsa.subdevice = "0" alsa.subdevice_name = "subdevice #0" alsa.device = "0" alsa.card = "0" alsa.card_name = "Sound BlasterX G5" alsa.long_card_name = "Creative Technology Ltd Sound BlasterX G5 at usb-0000:00:1d.7-3.1, high speed" alsa.driver_name = "snd_usb_audio" device.bus_path = "pci-0000:00:1d.7-usb-0:3.1:1.0" sysfs.path = "/devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3.1/2-3.1:1.0/sound/card0" udev.id = "usb-Creative_Technology_Ltd_Sound_BlasterX_G5_2800534752X-00" device.bus = "usb" device.vendor.id = "041e" device.vendor.name = "Creative Technology, Ltd" device.product.id = "3243" device.product.name = "Sound BlasterX G5" device.serial = "Creative_Technology_Ltd_Sound_BlasterX_G5_2800534752X" device.string = "front:0" device.buffering.buffer_size = "1048572" device.buffering.fragment_size = "524286" device.access_mode = "mmap+timer" device.profile.name = "analog-stereo" device.profile.description = "Analog Stereo" device.description = "Sound BlasterX G5 Analog Stereo" alsa.mixer_name = "USB Mixer" alsa.components = "USB041e:3243" module-udev-detect.discovered = "1" device.icon_name = "audio-card-usb" ports: analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown) properties: device.icon_name = "audio-speakers" active port: <analog-output-speaker>
s pozdravom
Milan Oravec
CIKT UKF Nitra mobil: +421907670270 email: moravec@ukf.sk
--------------------------------------------------------------------
Tuto spravu nepreveril ziadny antivirus - nebolo treba...
On 15.01.2017 11:29, Clemens Ladisch wrote:
Milan Oravec wrote:
http://www.alsa-project.org/db/?f=74ca49f354e9a100ebf7ba9fe9f6eb82c019f3ef
The device is 192K/24 capable under OSX but only when is DSP clock source set to direct stereo, this may be the problem in linux.
There is a mixer control named "Speaker Clock Source". Doesn't it work?
Regards, Clemens _______________________________________________ Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel