From: Mathias Nyman mathias.nyman@linux.intel.com
xHC controller can supports up to 1024 interrupters. To fit these change the max_interrupters varable from u8 to u16.
Add a separate mask for the reserve and preserve bits [5:0] in the erst base register and use it instead of the ERST_PRT_MASK. ERSR_PTR_MASK [3:0] is intended for masking bits in the event ring dequeue pointer register.
Signed-off-by: Mathias Nyman mathias.nyman@linux.intel.com --- drivers/usb/host/xhci-mem.c | 4 ++-- drivers/usb/host/xhci.h | 5 ++++- 2 files changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 81ca2bc1f0be..679befa97c7a 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -2529,8 +2529,8 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) "// Set ERST base address for ir_set 0 = 0x%llx", (unsigned long long)xhci->erst.erst_dma_addr); val_64 = xhci_read_64(xhci, &xhci->ir_set->erst_base); - val_64 &= ERST_PTR_MASK; - val_64 |= (xhci->erst.erst_dma_addr & (u64) ~ERST_PTR_MASK); + val_64 &= ERST_BASE_RSVDP; + val_64 |= (xhci->erst.erst_dma_addr & (u64) ~ERST_BASE_RSVDP); xhci_write_64(xhci, val_64, &xhci->ir_set->erst_base);
/* Set the event ring dequeue address */ diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index c9f06c5e4e9d..e1362e0c50e1 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -513,6 +513,9 @@ struct xhci_intr_reg { /* Preserve bits 16:31 of erst_size */ #define ERST_SIZE_MASK (0xffff << 16)
+/* erst_base bitmasks */ +#define ERST_BASE_RSVDP (0x3f) + /* erst_dequeue bitmasks */ /* Dequeue ERST Segment Index (DESI) - Segment number (or alias) * where the current dequeue pointer lies. This is an optional HW hint. @@ -1773,7 +1776,7 @@ struct xhci_hcd { u8 sbrn; u16 hci_version; u8 max_slots; - u8 max_interrupters; + u16 max_interrupters; u8 max_ports; u8 isoc_threshold; /* imod_interval in ns (I * 250ns) */