On Wed, Nov 14, 2018 at 01:16:42PM +0100, Clément Péron wrote:
Document the bindings for AK4118 S/PDIF transceiver
Signed-off-by: Clément Péron peron.clem@gmail.com
.../devicetree/bindings/sound/ak4118.txt | 22 +++++++++++++++++++ 1 file changed, 22 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/ak4118.txt
diff --git a/Documentation/devicetree/bindings/sound/ak4118.txt b/Documentation/devicetree/bindings/sound/ak4118.txt new file mode 100644 index 000000000000..6e11a2f7404c --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ak4118.txt @@ -0,0 +1,22 @@ +AK4118 S/PDIF transceiver
+This device supports I2C mode.
+Required properties:
+- compatible : "asahi-kasei,ak4118" +- reg : The I2C address of the device for I2C +- reset-gpios: A GPIO specifier for the reset pin +- irq-gpios: A GPIO specifier for the IRQ pin
This should use 'interrupts' instead.
+Example:
+&i2c {
- ak4118: ak4118@13 {
spdif@13 ? Node names should be based on the class of device, but there's not really one defined for this.
#sound-dai-cells = <0>;compatible = "asahi-kasei,ak4118";reg = <0x13>;reset-gpios = <&gpio 0 GPIO_ACTIVE_LOW>irq-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;- };
+};
2.19.1