The RT5670_L_MUTE_SFT and RT5670_R_MUTE_SFT bits (bits 15 and 7) of the RT5670_HP_VOL register are set / unset by the headphones deplop code run by rt5670_hp_event() on SND_SOC_DAPM_POST_PMU / SND_SOC_DAPM_PRE_PMD.
So we should not also export a control to userspace which toggles these same bits.
This should not cause any issues for userspace. AFAICT the rt567x codecs are only used on x86/ACPI devices and the UCM profiles used there do not use the "HP Playback Switch" control.
Signed-off-by: Hans de Goede hdegoede@redhat.com --- sound/soc/codecs/rt5670.c | 2 -- 1 file changed, 2 deletions(-)
diff --git a/sound/soc/codecs/rt5670.c b/sound/soc/codecs/rt5670.c index b13d9e0e0e61..0f372a748b0e 100644 --- a/sound/soc/codecs/rt5670.c +++ b/sound/soc/codecs/rt5670.c @@ -631,8 +631,6 @@ static SOC_ENUM_SINGLE_DECL(rt5670_if2_adc_enum, RT5670_DIG_INF1_DATA,
static const struct snd_kcontrol_new rt5670_snd_controls[] = { /* Headphone Output Volume */ - SOC_DOUBLE("HP Playback Switch", RT5670_HP_VOL, - RT5670_L_MUTE_SFT, RT5670_R_MUTE_SFT, 1, 1), SOC_DOUBLE_TLV("HP Playback Volume", RT5670_HP_VOL, RT5670_L_VOL_SFT, RT5670_R_VOL_SFT, 39, 1, out_vol_tlv),