Add LPASS PIL node for sc7280 based audioreach platforms.
Signed-off-by: Srinivasa Rao Mandadapu quic_srivasam@quicinc.com Tested-by: Mohammad Rafi Shaik quic_mohs@quicinc.com --- .../qcom/sc7280-herobrine-audioreach-wcd9385.dtsi | 4 + arch/arm64/boot/dts/qcom/sc7280.dtsi | 95 ++++++++++++++++++++++ 2 files changed, 99 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi index 7b3f7ee..81e0f3a 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi @@ -107,3 +107,7 @@ }; }; }; + +&remoteproc_adsp { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 6908bca..08142047 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/clock/qcom,dispcc-sc7280.h> #include <dt-bindings/clock/qcom,gcc-sc7280.h> #include <dt-bindings/clock/qcom,gpucc-sc7280.h> +#include <dt-bindings/clock/qcom,lpass-sc7280.h> #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h> #include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h> #include <dt-bindings/clock/qcom,rpmh.h> @@ -21,6 +22,7 @@ #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/reset/qcom,sdm845-aoss.h> #include <dt-bindings/reset/qcom,sdm845-pdc.h> +#include <dt-bindings/soc/qcom,gpr.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> #include <dt-bindings/sound/qcom,lpass.h> #include <dt-bindings/thermal/thermal.h> @@ -3439,6 +3441,99 @@ status = "disabled"; };
+ remoteproc_adsp: remoteproc@3000000 { + compatible = "qcom,sc7280-adsp-pil"; + reg = <0 0x03000000 0 0x5000>, <0 0x0355b000 0 0x10>; + reg-names = "qdsp6ss_base", "lpass_efuse"; + + status = "disabled"; + interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>, + <&adsp_smp2p_in 0 IRQ_TYPE_NONE>, + <&adsp_smp2p_in 1 IRQ_TYPE_NONE>, + <&adsp_smp2p_in 2 IRQ_TYPE_NONE>, + <&adsp_smp2p_in 3 IRQ_TYPE_NONE>, + <&adsp_smp2p_in 7 IRQ_TYPE_NONE>; + + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack", + "shutdown-ack"; + + qcom,qmp = <&aoss_qmp>; + + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_CFG_NOC_LPASS_CLK>; + + clock-names = "xo", "gcc_cfg_noc_lpass"; + + iommus = <&apps_smmu 0x1800 0x0>; + + power-domains = <&rpmhpd SC7280_CX>; + power-domain-names = "cx"; + + required-opps = <&rpmhpd_opp_nom>; + + resets = <&pdc_reset PDC_AUDIO_SYNC_RESET>, + <&aoss_reset AOSS_CC_LPASS_RESTART>; + + reset-names = "pdc_sync", "cc_lpass"; + qcom,halt-regs = <&tcsr_1 0x3000 0x5000 0x8000 0x13000>; + + memory-region = <&adsp_mem>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "lpass"; + qcom,remote-pid = <2>; + + gpr { + compatible = "qcom,gpr"; + qcom,glink-channels = "adsp_apps"; + qcom,domain = <GPR_DOMAIN_ID_ADSP>; + qcom,intents = <512 20>; + #address-cells = <1>; + #size-cells = <0>; + + q6apm: service@1 { + compatible = "qcom,q6apm"; + reg = <GPR_APM_MODULE_IID>; + #sound-dai-cells = <0>; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + + q6apmdai: dais { + compatible = "qcom,q6apm-dais"; + iommus = <&apps_smmu 0x1801 0x0>; + }; + + q6apmbedai: bedais { + compatible = "qcom,q6apm-lpass-dais"; + #sound-dai-cells = <1>; + }; + }; + + q6prm: service@2 { + compatible = "qcom,q6prm"; + reg = <GPR_PRM_MODULE_IID>; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + q6prmcc: clock-controller { + compatible = "qcom,q6prm-lpass-clocks"; + #clock-cells = <2>; + }; + }; + }; + }; + }; + remoteproc_wpss: remoteproc@8a00000 { compatible = "qcom,sc7280-wpss-pil"; reg = <0 0x08a00000 0 0x10000>;