Get the reset GPIO through the GPIO consumer API. This allows specifying the DT property as "reset-gpios" without breaking existing DT users.
Signed-off-by: Daniel Mack daniel@zonque.org --- sound/soc/codecs/ak4104.c | 22 +++++++--------------- 1 file changed, 7 insertions(+), 15 deletions(-)
diff --git a/sound/soc/codecs/ak4104.c b/sound/soc/codecs/ak4104.c index 32bc545c19cf..6dec8a65eafc 100644 --- a/sound/soc/codecs/ak4104.c +++ b/sound/soc/codecs/ak4104.c @@ -13,7 +13,7 @@ #include <linux/slab.h> #include <linux/spi/spi.h> #include <linux/of_device.h> -#include <linux/of_gpio.h> +#include <linux/gpio/consumer.h> #include <linux/regulator/consumer.h> #include <sound/asoundef.h> #include <sound/core.h> @@ -268,8 +268,8 @@ static const struct regmap_config ak4104_regmap = {
static int ak4104_spi_probe(struct spi_device *spi) { - struct device_node *np = spi->dev.of_node; struct ak4104_private *ak4104; + struct gpio_desc *reset_gpiod; unsigned int val; int ret;
@@ -297,19 +297,11 @@ static int ak4104_spi_probe(struct spi_device *spi) return ret; }
- if (np) { - enum of_gpio_flags flags; - int gpio = of_get_named_gpio_flags(np, "reset-gpio", 0, &flags); - - if (gpio_is_valid(gpio)) { - ret = devm_gpio_request_one(&spi->dev, gpio, - flags & OF_GPIO_ACTIVE_LOW ? - GPIOF_OUT_INIT_LOW : GPIOF_OUT_INIT_HIGH, - "ak4104 reset"); - if (ret < 0) - return ret; - } - } + reset_gpiod = devm_gpiod_get_optional(&spi->dev, "reset", + GPIOD_OUT_HIGH); + if (IS_ERR(reset_gpiod) && + PTR_ERR(reset_gpiod) == -EPROBE_DEFER) + return -EPROBE_DEFER;
/* read the 'reserved' register - according to the datasheet, it * should contain 0x5b. Not a good way to verify the presence of