From: Shuming Fan shumingf@realtek.com
To avoid calibration time-out, this patch adds the mutex between calibration and power state changes
Signed-off-by: Shuming Fan shumingf@realtek.com --- sound/soc/codecs/rt711.c | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/sound/soc/codecs/rt711.c b/sound/soc/codecs/rt711.c index 5771c02c3459..85f744184a60 100644 --- a/sound/soc/codecs/rt711.c +++ b/sound/soc/codecs/rt711.c @@ -462,6 +462,8 @@ static int rt711_set_amp_gain_put(struct snd_kcontrol *kcontrol, unsigned int read_ll, read_rl; int i;
+ mutex_lock(&rt711->calibrate_mutex); + /* Can't use update bit function, so read the original value first */ addr_h = mc->reg; addr_l = mc->rreg; @@ -547,6 +549,8 @@ static int rt711_set_amp_gain_put(struct snd_kcontrol *kcontrol, if (dapm->bias_level <= SND_SOC_BIAS_STANDBY) regmap_write(rt711->regmap, RT711_SET_AUDIO_POWER_STATE, AC_PWRST_D3); + + mutex_unlock(&rt711->calibrate_mutex); return 0; }
@@ -859,9 +863,11 @@ static int rt711_set_bias_level(struct snd_soc_component *component, break;
case SND_SOC_BIAS_STANDBY: + mutex_lock(&rt711->calibrate_mutex); regmap_write(rt711->regmap, RT711_SET_AUDIO_POWER_STATE, AC_PWRST_D3); + mutex_unlock(&rt711->calibrate_mutex); break;
default: