The tas2781-hda supports multi-projects. In some projects, GpioInt() was dropped due to no IRQ connection. See the example code in the cover letter. But in smi_i2c_probe(), smi_spi_probe() (serial-multi-instantiate.c), if looking for IRQ by smi_get_irq() fails, it will return an error, will not add new device, and cause smi_probe() to fail. So, we need to add an exception case for these situations. BTW, this patch will take effect on both I2C and SPI devices.
Signed-off-by: Baojun Xu baojun.xu@ti.com --- v4: - Change the description for this patch. v3: - Add IRQ_RESOURCE_OPT for IRQ missing cases. v2: - Remove error ignore, change to AUTO compatible with NONE. --- drivers/platform/x86/serial-multi-instantiate.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/platform/x86/serial-multi-instantiate.c b/drivers/platform/x86/serial-multi-instantiate.c index db030b0f176a..1a369334f9cb 100644 --- a/drivers/platform/x86/serial-multi-instantiate.c +++ b/drivers/platform/x86/serial-multi-instantiate.c @@ -22,6 +22,7 @@ #define IRQ_RESOURCE_GPIO 1 #define IRQ_RESOURCE_APIC 2 #define IRQ_RESOURCE_AUTO 3 +#define IRQ_RESOURCE_OPT BIT(2)
enum smi_bus_type { SMI_I2C, @@ -64,6 +65,10 @@ static int smi_get_irq(struct platform_device *pdev, struct acpi_device *adev, dev_dbg(&pdev->dev, "Using platform irq\n"); break; } + if (inst->flags & IRQ_RESOURCE_OPT) { + dev_dbg(&pdev->dev, "No irq\n"); + return 0; + } break; case IRQ_RESOURCE_GPIO: ret = acpi_dev_gpio_irq_get(adev, inst->irq_idx); @@ -386,10 +391,10 @@ static const struct smi_node cs35l57_hda = {
static const struct smi_node tas2781_hda = { .instances = { - { "tas2781-hda", IRQ_RESOURCE_AUTO, 0 }, - { "tas2781-hda", IRQ_RESOURCE_AUTO, 0 }, - { "tas2781-hda", IRQ_RESOURCE_AUTO, 0 }, - { "tas2781-hda", IRQ_RESOURCE_AUTO, 0 }, + { "tas2781-hda", IRQ_RESOURCE_AUTO | IRQ_RESOURCE_OPT, 0 }, + { "tas2781-hda", IRQ_RESOURCE_AUTO | IRQ_RESOURCE_OPT, 0 }, + { "tas2781-hda", IRQ_RESOURCE_AUTO | IRQ_RESOURCE_OPT, 0 }, + { "tas2781-hda", IRQ_RESOURCE_AUTO | IRQ_RESOURCE_OPT, 0 }, {} }, .bus_type = SMI_AUTO_DETECT,