Hello,
I am developing a dummy codec to interface with an 8-channel, 24-bit ADC. I've got it working on an NXP imx8m through the fsl_sai driver on kernel 5.4.85. I can capture all 8 channels at varying sample rates using arecord, and I've verified correct data capture via opening the resulting .wav file in Audacity. The problem I am having is that occasionally, upon starting arecord - after a fresh power cycle - I get an out of memory error. Other times I get an out of memory after a non-deterministic period of capture. Starting capture again also reports out of memory, but if I wait several minutes and start capture it will start recording again. A power cycle usually helps, but as stated earlier, not 100% of the time.
I'm trying to track down where the oom error is coming from, but haven't had much luck. My colleague tried running arecord with valgrind to check for memory leaks and nothing of note was observed. My suspicion is there's something going on with allocated memory for DMA, like fragmentation starts to happen and it can't get a contiguous region for operation. Reserving a large pool - either via device tree or boot cmd arguments in the bootoader - did not seem to help.
Another thought is that it's a boundary/alignment issue due to the 24-bit data, and the error is the result of trying to allocate a chunk of memory for DMA that doesn't align.
I'm very new to ALSA dev with some exposure to kernel dev in general, so please correct me if I'm wrong or completely mis-understanding something.
Any suggestions on where I should / how I can debug this memory error?
Thanks, Alex.