-----Original Message----- From: Lars-Peter Clausen [mailto:lars@metafoo.de] Sent: Tuesday, April 01, 2014 11:00 PM To: Arun Shamanna Lakshmi Cc: lgirdwood@gmail.com; broonie@kernel.org; swarren@wwwdotorg.org; perex@perex.cz; tiwai@suse.de; alsa-devel@alsa-project.org; linux- kernel@vger.kernel.org; Songhee Baek Subject: Re: [PATCH] ASoC: DAPM: Add support for multi register mux
On 04/01/2014 08:26 PM, Arun Shamanna Lakshmi wrote: [...]
diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index c8a780d..4d2b35c 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -514,9 +514,9 @@ static int dapm_connect_mux(struct
snd_soc_dapm_context *dapm,
unsigned int val, item; int i;
- if (e->reg != SND_SOC_NOPM) {
soc_widget_read(dest, e->reg, &val);
val = (val >> e->shift_l) & e->mask;
- if (e->reg[0] != SND_SOC_NOPM) {
soc_widget_read(dest, e->reg[0], &val);
val = (val >> e->shift_l) & e->mask[0]; item = snd_soc_enum_val_to_item(e, val);
This probably should handle the new enum type as well. You'll probably need some kind of flag in the struct to distinguish between the two enum types.
Any suggestion on the flag name ?
How about 'onehot'?
[...]
reg_val = BIT(bit_pos);
- }
- for (i = 0; i < e->num_regs; i++) {
if (i == reg_idx) {
change = snd_soc_test_bits(codec, e->reg[i],
e->mask[i],
reg_val);
} else {
/* accumulate the change to update the DAPM
path
when none is selected */
change += snd_soc_test_bits(codec, e->reg[i],
e->mask[i], 0);
change |=
/* clear the register when not selected */
snd_soc_write(codec, e->reg[i], 0);
I think this should happen as part of the DAPM update sequence like you had earlier. Some special care should probably be take to make sure that you de-select the previous mux input before selecting the new one if the new one is in a different register than the previous one.
I am not sure I follow this part. We are clearing the 'not selected' registers before we set the one we want. Do you want us to loop the logic of soc_dapm_mux_update_power for each register ? or do you want to change the dapm_update structure so that it takes all the regs, masks, and values together ?
The idea with the dapm_update struct is that the register updates are done in the middle of the power-down and power-up sequence. So yes, change the dapm_update struct to be able to hold all register updates and do all register updates in dapm_widget_update. I think an earlier version of your patch already had this.
Is the change similar to as shown below?
for (reg_idx = 0; reg_idx < e->num_regs; reg_idx++) { val = e->values[item * e->num_regs + reg_idx]; ret = snd_soc_update_bits_locked(codec, e->reg[reg_idx], e->mask[reg_idx], val); if (ret) return ret; }
During updating of the register's value, the above change can create non-zero value in two different registers (very short transition) as Mark mentioned for that change so we need to clear register first before writing the desired value in the register.
Should we add the clearing all registers and write the mux value in desired register in the update function?