Hello,
I did make the failure to not check before buy, but because the last
problem reports are from about a year ago, I think the card should work.
-- from lspci
86:00.0 Audio device [0403]: Creative Labs [SB X-Fi Xtreme Audio]
CA0110-IBG [1102:0009]
Subsystem: Creative Labs Device [1102:0018]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B+ DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 18
Region 0: Memory at d0100000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [dc] Power Management version 3
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Kernel modules: snd-hda-intel
--
The kernel is a 64-Bit linux-2.6.33.2 original unpatched from kernel.org
The mainboard is a Tyan S4985E.
I dont want to fill up the message with boot log and all that stuff
before there is a need.
I am willing to help to find the problem in nearly any way because this
is my workstation and I do need the PCI slot for some other purpose so
I do want to get this card working.
the alsa driver snd-hda-intel gives the following messages.
[ 3361.622125] hda-intel: spurious response 0x0:0x0, last cmd=0x000000
[ 3361.622125] hda-intel: spurious response 0x0:0x0, last cmd=0x000000
[ 3361.622125] hda-intel: spurious response 0x0:0x0, last cmd=0x000000
[ 3361.622125] hda-intel: spurious response 0x0:0x0, last cmd=0x000000
[ 3361.622125] hda-intel: spurious response 0x0:0x0, last cmd=0x000000
[ 3361.622125] hda-intel: spurious response 0x0:0x0, last cmd=0x000000
[ 3361.622125] hda-intel: spurious response 0x0:0x0, last cmd=0x000000
[ 3361.622125] hda-intel: spurious response 0x0:0x0, last cmd=0x000000
[ 3361.622125] hda-intel: spurious response 0x0:0x0, last cmd=0x000000
[ 3361.622125] hda-intel: spurious response 0x0:0x0, last cmd=0x000000
[ 3361.622125] hda-intel: spurious response 0x0:0x0, last cmd=0x000000
[ 3361.622125] hda-intel: spurious response 0x0:0x0, last cmd=0x000000
[ 3361.622125] hda-intel: spurious response 0x0:0x0, last cmd=0x000000
and with a quick look into the kernel I would think that the driver has
a wrong idea about the interrupts received and the work that has to be
done.
More Infos infos if needed.
Any help would be great.
BR
Hans-Juergen Lange
