On 15/04/2020 19:55:49-0500, Rob Herring wrote:
json-schema versions draft7 and earlier have a weird behavior in that any keywords combined with a '$ref' are ignored (silently). The correct form was to put a '$ref' under an 'allOf'. This behavior is now changed in the 2019-09 json-schema spec and '$ref' can be mixed with other keywords. The json-schema library doesn't yet support this, but the tooling now does a fixup for this and either way works.
This has been a constant source of review comments, so let's change this treewide so everyone copies the simpler syntax.
Signed-off-by: Rob Herring robh@kernel.org
Acked-by: Alexandre Belloni alexandre.belloni@bootlin.com
.../devicetree/bindings/arm/cpus.yaml | 81 +++--- .../devicetree/bindings/arm/l2c2x0.yaml | 87 +++--- .../devicetree/bindings/arm/psci.yaml | 15 +- .../bindings/arm/samsung/exynos-chipid.yaml | 5 +- .../bus/allwinner,sun50i-a64-de2.yaml | 5 +- .../bindings/clock/fixed-factor-clock.yaml | 5 +- .../bindings/connector/usb-connector.yaml | 28 +- .../bindings/crypto/st,stm32-hash.yaml | 9 +- .../allwinner,sun4i-a10-display-engine.yaml | 7 +- .../display/allwinner,sun4i-a10-tcon.yaml | 5 +- .../bindings/display/panel/panel-common.yaml | 5 +- .../devicetree/bindings/dma/dma-common.yaml | 3 +- .../devicetree/bindings/dma/ti/k3-udma.yaml | 18 +- .../devicetree/bindings/eeprom/at24.yaml | 11 +- .../devicetree/bindings/example-schema.yaml | 17 +- .../bindings/hwmon/adi,ltc2947.yaml | 32 +-- .../devicetree/bindings/hwmon/ti,tmp513.yaml | 21 +- .../devicetree/bindings/i2c/st,stm32-i2c.yaml | 9 +- .../bindings/iio/adc/adi,ad7124.yaml | 5 +- .../bindings/iio/adc/lltc,ltc2496.yaml | 3 +- .../bindings/iio/adc/microchip,mcp3911.yaml | 7 +- .../bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 31 +- .../bindings/iio/light/tsl2772.yaml | 13 +- .../bindings/iio/temperature/adi,ltc2983.yaml | 56 ++-- .../input/allwinner,sun4i-a10-lradc-keys.yaml | 5 +- .../devicetree/bindings/input/input.yaml | 9 +- .../interrupt-controller/arm,gic-v3.yaml | 39 ++- .../devicetree/bindings/iommu/arm,smmu.yaml | 3 +- .../devicetree/bindings/leds/common.yaml | 13 +- .../devicetree/bindings/leds/leds-gpio.yaml | 3 +- .../bindings/leds/rohm,bd71828-leds.yaml | 10 +- .../bindings/mailbox/st,stm32-ipcc.yaml | 5 +- .../bindings/media/amlogic,gx-vdec.yaml | 6 +- .../media/amlogic,meson-gx-ao-cec.yaml | 3 +- .../devicetree/bindings/media/rc.yaml | 265 +++++++++--------- .../bindings/media/renesas,vin.yaml | 7 +- .../memory-controllers/exynos-srom.yaml | 14 +- .../nvidia,tegra124-emc.yaml | 9 +- .../nvidia,tegra124-mc.yaml | 3 +- .../nvidia,tegra30-emc.yaml | 9 +- .../memory-controllers/nvidia,tegra30-mc.yaml | 3 +- .../bindings/mfd/allwinner,sun4i-a10-ts.yaml | 20 +- .../bindings/mfd/st,stm32-timers.yaml | 33 ++- .../devicetree/bindings/mfd/st,stpmic1.yaml | 9 +- .../devicetree/bindings/mfd/syscon.yaml | 5 +- .../devicetree/bindings/mmc/aspeed,sdhci.yaml | 4 +- .../devicetree/bindings/mmc/cdns,sdhci.yaml | 77 +++-- .../bindings/mmc/mmc-controller.yaml | 37 ++- .../bindings/mmc/rockchip-dw-mshc.yaml | 6 +- .../bindings/mmc/synopsys-dw-mshc-common.yaml | 14 +- .../mtd/allwinner,sun4i-a10-nand.yaml | 13 +- .../bindings/mtd/nand-controller.yaml | 27 +- .../bindings/net/can/bosch,m_can.yaml | 59 ++-- .../bindings/net/ethernet-controller.yaml | 34 +-- .../devicetree/bindings/net/qca,ar803x.yaml | 17 +- .../devicetree/bindings/net/snps,dwmac.yaml | 22 +- .../bindings/net/ti,cpsw-switch.yaml | 3 +- .../bindings/net/ti,davinci-mdio.yaml | 7 +- .../bindings/pci/intel-gw-pcie.yaml | 7 +- .../pinctrl/allwinner,sun4i-a10-pinctrl.yaml | 12 +- .../pinctrl/aspeed,ast2400-pinctrl.yaml | 37 ++- .../pinctrl/aspeed,ast2500-pinctrl.yaml | 45 ++- .../pinctrl/aspeed,ast2600-pinctrl.yaml | 108 ++++--- .../bindings/pinctrl/fsl,imx8mp-pinctrl.yaml | 31 +- .../bindings/pinctrl/intel,lgm-io.yaml | 4 +- .../bindings/pinctrl/pinmux-node.yaml | 3 +- .../bindings/pinctrl/st,stm32-pinctrl.yaml | 56 ++-- .../bindings/power/amlogic,meson-ee-pwrc.yaml | 3 +- .../devicetree/bindings/pwm/pwm-samsung.yaml | 11 +- .../bindings/regulator/gpio-regulator.yaml | 35 ++- .../bindings/regulator/mps,mpq7920.yaml | 31 +- .../bindings/regulator/regulator.yaml | 5 +- .../regulator/rohm,bd71828-regulator.yaml | 34 +-- .../bindings/regulator/st,stm32-booster.yaml | 3 +- .../regulator/st,stm32mp1-pwr-reg.yaml | 3 +- .../bindings/remoteproc/st,stm32-rproc.yaml | 9 +- .../bindings/reset/intel,rcu-gw.yaml | 3 +- .../devicetree/bindings/riscv/cpus.yaml | 20 +- .../devicetree/bindings/rtc/st,stm32-rtc.yaml | 9 +- .../devicetree/bindings/serial/pl011.yaml | 10 +- .../devicetree/bindings/serial/rs485.yaml | 26 +- .../bindings/serial/samsung_uart.yaml | 5 +- .../bindings/sound/adi,adau7118.yaml | 20 +- .../sound/allwinner,sun4i-a10-codec.yaml | 41 ++- .../bindings/sound/qcom,wcd934x.yaml | 3 +- .../bindings/spi/renesas,sh-msiof.yaml | 42 ++- .../bindings/spi/spi-controller.yaml | 14 +- .../devicetree/bindings/spi/spi-pl022.yaml | 55 ++-- .../devicetree/bindings/spi/spi-sifive.yaml | 14 +- .../bindings/thermal/qcom-tsens.yaml | 7 +- .../bindings/timer/arm,arch_timer_mmio.yaml | 7 +- 91 files changed, 881 insertions(+), 1103 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index a01814765ddb..3338bae4cee3 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -171,49 +171,48 @@ properties: - qcom,scorpion
enable-method:
- allOf:
- $ref: '/schemas/types.yaml#/definitions/string'- oneOf:
- $ref: '/schemas/types.yaml#/definitions/string'
- oneOf: # On ARM v8 64-bit this property is required
- enum:- psci- spin-table
- enum:- psci- spin-table # On ARM 32-bit systems this property is optional
- enum:- actions,s500-smp- allwinner,sun6i-a31- allwinner,sun8i-a23- allwinner,sun9i-a80-smp- allwinner,sun8i-a83t-smp- amlogic,meson8-smp- amlogic,meson8b-smp- arm,realview-smp- aspeed,ast2600-smp- brcm,bcm11351-cpu-method- brcm,bcm23550- brcm,bcm2836-smp- brcm,bcm63138- brcm,bcm-nsp-smp- brcm,brahma-b15- marvell,armada-375-smp- marvell,armada-380-smp- marvell,armada-390-smp- marvell,armada-xp-smp- marvell,98dx3236-smp- marvell,mmp3-smp- mediatek,mt6589-smp- mediatek,mt81xx-tz-smp- qcom,gcc-msm8660- qcom,kpss-acc-v1- qcom,kpss-acc-v2- renesas,apmu- renesas,r9a06g032-smp- rockchip,rk3036-smp- rockchip,rk3066-smp- socionext,milbeaut-m10v-smp- ste,dbx500-smp- ti,am3352- ti,am4372
- enum:- actions,s500-smp- allwinner,sun6i-a31- allwinner,sun8i-a23- allwinner,sun9i-a80-smp- allwinner,sun8i-a83t-smp- amlogic,meson8-smp- amlogic,meson8b-smp- arm,realview-smp- aspeed,ast2600-smp- brcm,bcm11351-cpu-method- brcm,bcm23550- brcm,bcm2836-smp- brcm,bcm63138- brcm,bcm-nsp-smp- brcm,brahma-b15- marvell,armada-375-smp- marvell,armada-380-smp- marvell,armada-390-smp- marvell,armada-xp-smp- marvell,98dx3236-smp- marvell,mmp3-smp- mediatek,mt6589-smp- mediatek,mt81xx-tz-smp- qcom,gcc-msm8660- qcom,kpss-acc-v1- qcom,kpss-acc-v2- renesas,apmu- renesas,r9a06g032-smp- rockchip,rk3036-smp- rockchip,rk3066-smp- socionext,milbeaut-m10v-smp- ste,dbx500-smp- ti,am3352- ti,am4372cpu-release-addr: $ref: '/schemas/types.yaml#/definitions/uint64'
diff --git a/Documentation/devicetree/bindings/arm/l2c2x0.yaml b/Documentation/devicetree/bindings/arm/l2c2x0.yaml index 5d1d50eea26e..6b8f4d4fa580 100644 --- a/Documentation/devicetree/bindings/arm/l2c2x0.yaml +++ b/Documentation/devicetree/bindings/arm/l2c2x0.yaml @@ -70,43 +70,39 @@ properties: description: Cycles of latency for Data RAM accesses. Specifies 3 cells of read, write and setup latencies. Minimum valid values are 1. Controllers without setup latency control should use a value of 0.
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array- minItems: 2maxItems: 3items:minimum: 0maximum: 8
$ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 2
maxItems: 3
items:
minimum: 0maximum: 8arm,tag-latency: description: Cycles of latency for Tag RAM accesses. Specifies 3 cells of read, write and setup latencies. Controllers without setup latency control should use 0. Controllers without separate read and write Tag RAM latency values should only use the first cell.
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array- minItems: 1maxItems: 3items:minimum: 0maximum: 8
$ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 1
maxItems: 3
items:
minimum: 0maximum: 8arm,dirty-latency: description: Cycles of latency for Dirty RAMs. This is a single cell.
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32- minimum: 1maximum: 8
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 1
maximum: 8
arm,filter-ranges: description: <start length> Starting address and length of window to filter. Addresses in the filter window are directed to the M1 port. Other addresses will go to the M0 port.
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array- items:minItems: 2maxItems: 2
$ref: /schemas/types.yaml#/definitions/uint32-array
items:
minItems: 2maxItems: 2arm,io-coherent: description: indicates that the system is operating in an hardware
@@ -131,36 +127,31 @@ properties: arm,double-linefill: description: Override double linefill enable setting. Enable if non-zero, disable if zero.
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32- enum: [ 0, 1 ]
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1]
arm,double-linefill-incr: description: Override double linefill on INCR read. Enable if non-zero, disable if zero.
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32- enum: [ 0, 1 ]
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1]
arm,double-linefill-wrap: description: Override double linefill on WRAP read. Enable if non-zero, disable if zero.
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32- enum: [ 0, 1 ]
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1]
arm,prefetch-drop: description: Override prefetch drop enable setting. Enable if non-zero, disable if zero.
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32- enum: [ 0, 1 ]
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1]
arm,prefetch-offset: description: Override prefetch offset value.
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32- enum: [ 0, 1, 2, 3, 4, 5, 6, 7, 15, 23, 31 ]
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2, 3, 4, 5, 6, 7, 15, 23, 31]
arm,shared-override: description: The default behavior of the L220 or PL310 cache
@@ -193,35 +184,31 @@ properties: description: | Data prefetch. Value: <0> (forcibly disable), <1> (forcibly enable), property absent (retain settings set by firmware)
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32- enum: [ 0, 1 ]
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1]
prefetch-instr: description: | Instruction prefetch. Value: <0> (forcibly disable), <1> (forcibly enable), property absent (retain settings set by firmware)
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32- enum: [ 0, 1 ]
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1]
arm,dynamic-clock-gating: description: | L2 dynamic clock gating. Value: <0> (forcibly disable), <1> (forcibly enable), property absent (OS specific behavior, preferably retain firmware settings)
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32- enum: [ 0, 1 ]
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1]
arm,standby-mode: description: L2 standby mode enable. Value <0> (forcibly disable), <1> (forcibly enable), property absent (OS specific behavior, preferably retain firmware settings)
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32- enum: [ 0, 1 ]
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1]
arm,early-bresp-disable: description: Disable the CA9 optimization Early BRESP (PL310)
diff --git a/Documentation/devicetree/bindings/arm/psci.yaml b/Documentation/devicetree/bindings/arm/psci.yaml index 9247b58c26fc..4f9b361aefd6 100644 --- a/Documentation/devicetree/bindings/arm/psci.yaml +++ b/Documentation/devicetree/bindings/arm/psci.yaml @@ -69,13 +69,12 @@ properties:
method: description: The method of calling the PSCI firmware.
- allOf:
- $ref: /schemas/types.yaml#/definitions/string-array- enum:# SMC #0, with the register assignments specified in this binding.- smc
- $ref: /schemas/types.yaml#/definitions/string-array
- enum:
- smc # HVC #0, with the register assignments specified in this binding.
- hvc
- hvccpu_suspend: $ref: /schemas/types.yaml#/definitions/uint32
@@ -107,8 +106,8 @@ properties:
patternProperties: "^power-domain-":
- allOf:
- $ref: "../power/power-domain.yaml#"
- $ref: "../power/power-domain.yaml#"
- type: object description: | ARM systems can have multiple cores, sometimes in an hierarchical
diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml b/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml index 0425d333b50d..f99c0c6df21b 100644 --- a/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml +++ b/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml @@ -22,9 +22,8 @@ properties: Adaptive Supply Voltage bin selection. This can be used to determine the ASV bin of an SoC if respective information is missing in the CHIPID registers or in the OTP memory.
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32- enum: [ 0, 1, 2, 3 ]
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1, 2, 3]
required:
- compatible
diff --git a/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml b/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml index f0b3d30fbb76..0503651cd214 100644 --- a/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml +++ b/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml @@ -31,12 +31,11 @@ properties: maxItems: 1
allwinner,sram:
- allOf:
- $ref: /schemas/types.yaml#definitions/phandle-array- maxItems: 1
$ref: /schemas/types.yaml#definitions/phandle-array
maxItems: 1
ranges: true
diff --git a/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml b/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml index b567f8092f8c..f415845b38dd 100644 --- a/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml +++ b/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml @@ -24,9 +24,8 @@ properties:
clock-div: description: Fixed divider
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32- minimum: 1
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 1
clock-mult: description: Fixed multiplier
diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml index 369c58e22a06..03b92b6f35fa 100644 --- a/Documentation/devicetree/bindings/connector/usb-connector.yaml +++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml @@ -27,8 +27,8 @@ properties: description: Size of the connector, should be specified in case of non-fullsize 'usb-a-connector' or 'usb-b-connector' compatible connectors.
- allOf:
- $ref: /schemas/types.yaml#definitions/string
- $ref: /schemas/types.yaml#definitions/string
- enum: - mini - micro
@@ -57,8 +57,8 @@ properties: power-role: description: Determines the power role that the Type C connector will support. "dual" refers to Dual Role Port (DRP).
- allOf:
- $ref: /schemas/types.yaml#definitions/string
- $ref: /schemas/types.yaml#definitions/string
- enum: - source - sink
@@ -66,18 +66,18 @@ properties:
try-power-role: description: Preferred power role.
- allOf:
- $ref: /schemas/types.yaml#definitions/string
- $ref: /schemas/types.yaml#definitions/string
- enum:
- source- sink- dual
- source- sink- dualdata-role: description: Data role if Type C connector supports USB data. "dual" refers Dual Role Device (DRD).
- allOf:
- $ref: /schemas/types.yaml#definitions/string
- $ref: /schemas/types.yaml#definitions/string
- enum: - host - device
@@ -95,8 +95,7 @@ properties: defined in dt-bindings/usb/pd.h. minItems: 1 maxItems: 7
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array
$ref: /schemas/types.yaml#/definitions/uint32-array
sink-pdos: description: An array of u32 with each entry providing supported power sink
@@ -108,8 +107,7 @@ properties: in dt-bindings/usb/pd.h. minItems: 1 maxItems: 7
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array
$ref: /schemas/types.yaml#/definitions/uint32-array
op-sink-microwatt: description: Sink required operating power in microwatt, if source can't
diff --git a/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml b/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml index 57ae1c0b6d18..6dd658f0912c 100644 --- a/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml +++ b/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml @@ -36,11 +36,10 @@ properties:
dma-maxburst: description: Set number of maximum dma burst supported
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32- minimum: 0- maximum: 2- default: 0
- $ref: /schemas/types.yaml#/definitions/uint32
- minimum: 0
- maximum: 2
- default: 0
required:
- compatible
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml index 944ff2f1cf93..e77523b02fad 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml @@ -66,10 +66,9 @@ properties: - allwinner,sun50i-h6-display-engine
allwinner,pipelines:
- allOf:
- $ref: /schemas/types.yaml#/definitions/phandle-array- minItems: 1maxItems: 2
- $ref: /schemas/types.yaml#/definitions/phandle-array
- minItems: 1
- maxItems: 2 description: | Available display engine frontends (DE 1.0) or mixers (DE 2.0/3.0) available.
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml index 87cb77b32ee3..4c15a2644a7c 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml @@ -71,11 +71,10 @@ properties: maxItems: 4
clock-output-names:
- allOf:
- $ref: /schemas/types.yaml#/definitions/string-array- maxItems: 1
$ref: /schemas/types.yaml#/definitions/string-array
maxItems: 1
dmas: maxItems: 1
diff --git a/Documentation/devicetree/bindings/display/panel/panel-common.yaml b/Documentation/devicetree/bindings/display/panel/panel-common.yaml index ed051ba12084..b05573de08f3 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-common.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-common.yaml @@ -48,9 +48,8 @@ properties: rotation: description: Display rotation in degrees counter clockwise (0,90,180,270)
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32- enum: [ 0, 90, 180, 270 ]
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 90, 180, 270]
# Display Timings panel-timing:
diff --git a/Documentation/devicetree/bindings/dma/dma-common.yaml b/Documentation/devicetree/bindings/dma/dma-common.yaml index 02a34ba2b49b..c36592683340 100644 --- a/Documentation/devicetree/bindings/dma/dma-common.yaml +++ b/Documentation/devicetree/bindings/dma/dma-common.yaml @@ -31,8 +31,7 @@ properties: kernel. i.e. first channel corresponds to LSB. The first item in the array is for channels 0-31, the second is for channels 32-63, etc.
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array
- $ref: /schemas/types.yaml#/definitions/uint32-array items: minItems: 1 # Should be enough
diff --git a/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml b/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml index 85056982a242..10b74095935f 100644 --- a/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml +++ b/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml @@ -78,25 +78,21 @@ properties:
ti,sci: description: phandle to TI-SCI compatible System controller node
- allOf:
- $ref: /schemas/types.yaml#/definitions/phandle
$ref: /schemas/types.yaml#/definitions/phandle
ti,sci-dev-id: description: TI-SCI device id of UDMAP
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
ti,ringacc: description: phandle to the ring accelerator node
- allOf:
- $ref: /schemas/types.yaml#/definitions/phandle
$ref: /schemas/types.yaml#/definitions/phandle
ti,sci-rm-range-tchan: description: | Array of UDMA tchan resource subtypes for resource allocation for this host
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array
- $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 1 # Should be enough maxItems: 255
@@ -105,8 +101,7 @@ properties: description: | Array of UDMA rchan resource subtypes for resource allocation for this host
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array
- $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 1 # Should be enough maxItems: 255
@@ -115,8 +110,7 @@ properties: description: | Array of UDMA rflow resource subtypes for resource allocation for this host
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array
- $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 1 # Should be enough maxItems: 255
diff --git a/Documentation/devicetree/bindings/eeprom/at24.yaml b/Documentation/devicetree/bindings/eeprom/at24.yaml index a15787e504f0..de513fe333a7 100644 --- a/Documentation/devicetree/bindings/eeprom/at24.yaml +++ b/Documentation/devicetree/bindings/eeprom/at24.yaml @@ -118,14 +118,13 @@ properties: maxItems: 1
pagesize:
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32- enum: [ 1, 8, 16, 32, 64, 128, 258 ]
$ref: /schemas/types.yaml#/definitions/uint32
enum: [1, 8, 16, 32, 64, 128, 258] default: 1
read-only:
@@ -148,18 +147,16 @@ properties: wp-gpios: true
address-width:
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32 default: 8 enum: [ 8, 16 ]
num-addresses:
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- $ref: /schemas/types.yaml#/definitions/uint32 default: 1 minimum: 1 maximum: 8
diff --git a/Documentation/devicetree/bindings/example-schema.yaml b/Documentation/devicetree/bindings/example-schema.yaml index 62811a1b5058..c9534d2164a2 100644 --- a/Documentation/devicetree/bindings/example-schema.yaml +++ b/Documentation/devicetree/bindings/example-schema.yaml @@ -138,12 +138,8 @@ properties: # 'description'. vendor,int-property: description: Vendor specific properties must have a description
- # 'allOf' is the json-schema way of subclassing a schema. Here the base
- # type schema is referenced and then additional constraints on the values
- # are added.
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32- enum: [2, 4, 6, 8, 10]
$ref: /schemas/types.yaml#/definitions/uint32
enum: [2, 4, 6, 8, 10]
vendor,bool-property: description: Vendor specific properties must have a description. Boolean
@@ -154,11 +150,10 @@ properties: vendor,string-array-property: description: Vendor specific properties should reference a type in the core schema.
- allOf:
- $ref: /schemas/types.yaml#/definitions/string-array- items:- enum: [ foo, bar ]- enum: [ baz, boo ]
$ref: /schemas/types.yaml#/definitions/string-array
items:
- enum: [foo, bar]- enum: [baz, boo]vendor,property-in-standard-units-microvolt: description: Vendor specific properties having a standard unit suffix
diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml index 44a63fffb4be..eef614962b10 100644 --- a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml +++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml @@ -38,20 +38,18 @@ properties: the accumulated values, this entry can also have two items which sets energy1/charge1 and energy2/charger2 respectively. Check table 12 of the datasheet for more information on the supported options.
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array- minItems: 2maxItems: 2items:enum: [0, 1, 2, 3]default: 0
$ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 2
maxItems: 2
items:
enum: [0, 1, 2, 3]default: 0adi,accumulation-deadband-microamp: description: This property controls the Accumulation Dead band which allows to set the level of current below which no accumulation takes place.
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- $ref: /schemas/types.yaml#/definitions/uint32 maximum: 255 default: 0
@@ -61,8 +59,7 @@ properties: active high, setting it to zero makets it active low. When this property is present, the GPIO is automatically configured as output and set to control a fan as a function of measured temperature.
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1] default: 0
@@ -74,13 +71,12 @@ properties: registers. Check table 13 of the datasheet for more information on the supported options. This property cannot be used together with adi,gpio-out-pol.
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array- minItems: 2maxItems: 2items:enum: [0, 1, 2]default: 0
- $ref: /schemas/types.yaml#/definitions/uint32-array
- minItems: 2
- maxItems: 2
- items:
enum: [0, 1, 2]default: 0required:
- compatible
diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml index 3f043e943668..90b2fa3f7752 100644 --- a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml +++ b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml @@ -45,16 +45,14 @@ properties: The gain value for the PGA function. This is 8, 4, 2 or 1. The PGA gain affect the shunt voltage range. The range will be equal to: pga-gain * 40mV
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32 enum: [1, 2, 4, 8] default: 8
ti,bus-range-microvolt: description: | This is the operating range of the bus voltage in microvolt
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- $ref: /schemas/types.yaml#/definitions/uint32 enum: [16000000, 32000000] default: 32000000
@@ -63,14 +61,13 @@ properties: Array of three(TMP513) or two(TMP512) n-Factor value for each remote temperature channel. See datasheet Table 11 for n-Factor range list and value interpretation.
- allOf:
- $ref: /schemas/types.yaml#definitions/uint32-array- minItems: 2maxItems: 3items:default: 0x00minimum: 0x00maximum: 0xFF
- $ref: /schemas/types.yaml#definitions/uint32-array
- minItems: 2
- maxItems: 3
- items:
default: 0x00minimum: 0x00maximum: 0xFFrequired:
- compatible
diff --git a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml index 900ec1ab6a47..96630f225207 100644 --- a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml @@ -30,11 +30,10 @@ allOf: Fast Mode Plus speed is selected by slave. Format is phandle to syscfg / register offset within syscfg / register bitmask for FMP bit.
allOf:- $ref: "/schemas/types.yaml#/definitions/phandle-array"- items:minItems: 3maxItems: 3
$ref: "/schemas/types.yaml#/definitions/phandle-array"items:minItems: 3maxItems: 3
- if: properties:
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml index 97087a45ce54..deb34deff0e8 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml @@ -83,9 +83,8 @@ patternProperties: 1: REFIN2(+)/REFIN2(−). 3: AVDD If this field is left empty, internal reference is selected.
allOf:- $ref: /schemas/types.yaml#/definitions/uint32- enum: [0, 1, 3]
$ref: /schemas/types.yaml#/definitions/uint32enum: [0, 1, 3] diff-channels: description: see Documentation/devicetree/bindings/iio/adc/adc.txtdiff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml index 97f521d654ea..6a991e9f78e2 100644 --- a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml +++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml @@ -18,8 +18,7 @@ properties:
vref-supply: description: phandle to an external regulator providing the reference voltage
- allOf:
- $ref: /schemas/types.yaml#/definitions/phandle
$ref: /schemas/types.yaml#/definitions/phandle
reg: description: spi chipselect number according to the usual spi bindings
diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml index 8ffeceb6abae..95ab285f4eba 100644 --- a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml +++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml @@ -38,10 +38,9 @@ properties:
microchip,device-addr: description: Device address when multiple MCP3911 chips are present on the same SPI bus.
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32- enum: [0, 1, 2, 3]- default: 0
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2, 3]
default: 0
vref-supply: description: |
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml index b1627441a0b2..d69ca492d020 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml @@ -95,16 +95,14 @@ patternProperties: On stm32h7 and stm32mp1: - For st,stm32-dfsdm-adc: up to 8 channels numbered from 0 to 7. - For st,stm32-dfsdm-dmic: 1 channel numbered from 0 to 7.
allOf:- $ref: /schemas/types.yaml#/definitions/uint32-array- items:minimum: 0maximum: 7
$ref: /schemas/types.yaml#/definitions/uint32-arrayitems:minimum: 0maximum: 7 st,adc-channel-names: description: List of single-ended channel names.
allOf:- $ref: /schemas/types.yaml#/definitions/string-array
$ref: /schemas/types.yaml#/definitions/string-array st,filter-order: description: |@@ -112,11 +110,10 @@ patternProperties: - 0: FastSinC - [1-5]: order 1 to 5. For audio purpose it is recommended to use order 3 to 5.
allOf:- $ref: /schemas/types.yaml#/definitions/uint32- items:minimum: 0maximum: 5
$ref: /schemas/types.yaml#/definitions/uint32items:minimum: 0maximum: 5 "#io-channel-cells": const: 1@@ -129,9 +126,8 @@ patternProperties: - "MANCH_R": manchester codec, rising edge = logic 0, falling edge = logic 1 - "MANCH_F": manchester codec, rising edge = logic 1, falling edge = logic 0 items:
enum: [ SPI_R, SPI_F, MANCH_R, MANCH_F ]allOf:- $ref: /schemas/types.yaml#/definitions/non-unique-string-array
enum: [SPI_R, SPI_F, MANCH_R, MANCH_F]$ref: /schemas/types.yaml#/definitions/non-unique-string-array st,adc-channel-clk-src: description: |@@ -141,9 +137,8 @@ patternProperties: - "CLKOUT_F": internal SPI clock divided by 2 (falling edge). - "CLKOUT_R": internal SPI clock divided by 2 (rising edge). items:
enum: [ CLKIN, CLKOUT, CLKOUT_F, CLKOUT_R ]allOf:- $ref: /schemas/types.yaml#/definitions/non-unique-string-array
enum: [CLKIN, CLKOUT, CLKOUT_F, CLKOUT_R]$ref: /schemas/types.yaml#/definitions/non-unique-string-array st,adc-alt-channel: description:diff --git a/Documentation/devicetree/bindings/iio/light/tsl2772.yaml b/Documentation/devicetree/bindings/iio/light/tsl2772.yaml index e8f7d1ada57b..d81229857944 100644 --- a/Documentation/devicetree/bindings/iio/light/tsl2772.yaml +++ b/Documentation/devicetree/bindings/iio/light/tsl2772.yaml @@ -33,13 +33,12 @@ properties:
amstaos,proximity-diodes: description: Proximity diodes to enable
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array- minItems: 1maxItems: 2items:minimum: 0maximum: 1
$ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 1
maxItems: 2
items:
minimum: 0maximum: 1interrupts: maxItems: 1
diff --git a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml index 8fb46de6641d..9480ede59c37 100644 --- a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml +++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml @@ -42,10 +42,9 @@ properties: 0 - 50/60Hz rejection 1 - 60Hz rejection 2 - 50Hz rejection
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32- minimum: 0maximum: 2
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 2
'#address-cells': const: 1
@@ -91,8 +90,7 @@ patternProperties: 7 - Type T Thermocouple 8 - Type B Thermocouple 9 - Custom Thermocouple
allOf:- $ref: /schemas/types.yaml#/definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32 minimum: 1 maximum: 9@@ -121,8 +119,7 @@ patternProperties: more details look at table 69 and 70. Note should be signed, but dtc doesn't currently maintain the sign.
allOf:- $ref: /schemas/types.yaml#/definitions/uint64-matrix
$ref: /schemas/types.yaml#/definitions/uint64-matrix minItems: 3 maxItems: 64 items:@@ -138,8 +135,7 @@ patternProperties: properties: adi,sensor-type: description: Identifies the sensor as a diode.
allOf:- $ref: /schemas/types.yaml#/definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32 const: 28 adi,single-ended:@@ -196,8 +192,7 @@ patternProperties: 16 - RTD PT-1000 (0.00375) 17 - RTD NI-120 18 - RTD Custom
allOf:- $ref: /schemas/types.yaml#/definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32 minimum: 10 maximum: 18@@ -210,9 +205,8 @@ patternProperties: description: Identifies the number of wires used by the RTD. Setting this property to 5 means 4 wires with Kelvin Rsense.
allOf:- $ref: /schemas/types.yaml#/definitions/uint32- enum: [2, 3, 4, 5]
$ref: /schemas/types.yaml#/definitions/uint32enum: [2, 3, 4, 5] adi,rsense-share: description:@@ -237,18 +231,16 @@ patternProperties: description: This property set the RTD curve used and the corresponding Callendar-VanDusen constants. Look at table 30 of the datasheet.
allOf:- $ref: /schemas/types.yaml#/definitions/uint32- minimum: 0maximum: 3
$ref: /schemas/types.yaml#/definitions/uint32minimum: 0maximum: 3 adi,custom-rtd: description: This is a table, where each entry should be a pair of resistance(ohm)-temperature(K). The entries added here are in uohm and uK. For more details values look at table 74 and 75.
allOf:- $ref: /schemas/types.yaml#/definitions/uint64-matrix
$ref: /schemas/types.yaml#/definitions/uint64-matrix items: minItems: 3 maxItems: 64@@ -280,8 +272,7 @@ patternProperties: 25 - Thermistor Spectrum 1003k 1kohm 26 - Thermistor Custom Steinhart-Hart 27 - Custom Thermistor
allOf:- $ref: /schemas/types.yaml#/definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32 minimum: 19 maximum: 27@@ -314,10 +305,9 @@ patternProperties: This property controls the magnitude of the excitation current applied to the thermistor. Value 0 set's the sensor in auto-range mode.
allOf:- $ref: /schemas/types.yaml#/definitions/uint32- enum: [0, 250, 500, 1000, 5000, 10000, 25000, 50000, 100000,250000, 500000, 1000000]
$ref: /schemas/types.yaml#/definitions/uint32enum: [0, 250, 500, 1000, 5000, 10000, 25000, 50000, 100000, 250000,500000, 1000000] adi,custom-thermistor: description:@@ -325,8 +315,7 @@ patternProperties: resistance(ohm)-temperature(K). The entries added here are in uohm and uK only for custom thermistors. For more details look at table 78 and 79.
allOf:- $ref: /schemas/types.yaml#/definitions/uint64-matrix
$ref: /schemas/types.yaml#/definitions/uint64-matrix minItems: 3 maxItems: 64 items:@@ -339,8 +328,7 @@ patternProperties: be programmed into the device memory using this property. For Steinhart sensors the coefficients are given in the raw format. Look at table 82 for more information.
allOf:- $ref: /schemas/types.yaml#/definitions/uint32-array
$ref: /schemas/types.yaml#/definitions/uint32-array items: minItems: 6 maxItems: 6@@ -358,8 +346,7 @@ patternProperties: properties: adi,sensor-type: description: Identifies the sensor as a direct adc.
allOf:- $ref: /schemas/types.yaml#/definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32 const: 30 adi,single-ended:@@ -379,8 +366,7 @@ patternProperties:
adi,sensor-type: description: Identifies the sensor as a rsense.
allOf:- $ref: /schemas/types.yaml#/definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32 const: 29 adi,rsense-val-milli-ohms:diff --git a/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml b/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml index 512a6af5aa42..cffd02028d02 100644 --- a/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml +++ b/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml @@ -42,9 +42,8 @@ patternProperties: description: Keycode to emit
channel:
allOf:- $ref: /schemas/types.yaml#/definitions/uint32- enum: [0, 1]
$ref: /schemas/types.yaml#/definitions/uint32enum: [0, 1] description: ADC Channel this key is attached to voltage:diff --git a/Documentation/devicetree/bindings/input/input.yaml b/Documentation/devicetree/bindings/input/input.yaml index 6d519046b3af..8edcb3c31270 100644 --- a/Documentation/devicetree/bindings/input/input.yaml +++ b/Documentation/devicetree/bindings/input/input.yaml @@ -18,11 +18,10 @@ properties: description: Specifies an array of numeric keycode values to be used for reporting button presses.
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array- items:minimum: 0maximum: 0xff
$ref: /schemas/types.yaml#/definitions/uint32-array
items:
minimum: 0maximum: 0xffpoll-interval: description: Poll interval time in milliseconds.
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml index 66aacd106503..1ecd1831cf02 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml @@ -91,18 +91,16 @@ properties: description: If using padding pages, specifies the stride of consecutive redistributors. Must be a multiple of 64kB.
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint64- multipleOf: 0x10000exclusiveMinimum: 0
$ref: /schemas/types.yaml#/definitions/uint64
multipleOf: 0x10000
exclusiveMinimum: 0
"#redistributor-regions": description: The number of independent contiguous regions occupied by the redistributors. Required if more than one such region is present.
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32- maximum: 4096 # Should be enough?
$ref: /schemas/types.yaml#/definitions/uint32
maximum: 4096
msi-controller: description:
@@ -114,22 +112,20 @@ properties: A list of pairs <intid span>, where "intid" is the first SPI of a range that can be used an MBI, and "span" the size of that range. Multiple ranges can be provided.
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-matrix- items:minItems: 2maxItems: 2
$ref: /schemas/types.yaml#/definitions/uint32-matrix
items:
minItems: 2maxItems: 2mbi-alias: description: Address property. Base address of an alias of the GICD region containing only the {SET,CLR}SPI registers to be used if isolation is required, and if supported by the HW.
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array- items:minItems: 1maxItems: 2
$ref: /schemas/types.yaml#/definitions/uint32-array
items:
minItems: 1maxItems: 2ppi-partitions: type: object
@@ -188,11 +184,10 @@ patternProperties: description: (u32, u32) tuple describing the untranslated address and size of the pre-ITS window.
allOf:- $ref: /schemas/types.yaml#/definitions/uint32-array- items:minItems: 2maxItems: 2
$ref: /schemas/types.yaml#/definitions/uint32-arrayitems:minItems: 2maxItems: 2required: - compatible
diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml index 6515dbe47508..3aa554878b90 100644 --- a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml +++ b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml @@ -56,8 +56,7 @@ properties:
'#global-interrupts': description: The number of global interrupts exposed by the device.
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 260 # 2 secure, 2 non-secure, and up to 256 perf counters
diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml index 4c270fde4567..a2a541bca73c 100644 --- a/Documentation/devicetree/bindings/leds/common.yaml +++ b/Documentation/devicetree/bindings/leds/common.yaml @@ -41,8 +41,7 @@ properties: Color of the LED. Use one of the LED_COLOR_ID_* prefixed definitions from the header include/dt-bindings/leds/common.h. If there is no matching LED_COLOR_ID available, add a new one.
- allOf:
- $ref: /schemas/types.yaml#definitions/uint32
- $ref: /schemas/types.yaml#definitions/uint32 minimum: 0 maximum: 8
@@ -67,8 +66,7 @@ properties: produced where the LED momentarily turns off (or on). The "keep" setting will keep the LED at whatever its current state is, without producing a glitch.
- allOf:
- $ref: /schemas/types.yaml#definitions/string
- $ref: /schemas/types.yaml#definitions/string enum:
- on
- off
@@ -79,8 +77,8 @@ properties: description: This parameter, if present, is a string defining the trigger assigned to the LED.
- allOf:
- $ref: /schemas/types.yaml#definitions/string
- $ref: /schemas/types.yaml#definitions/string
- enum: # LED will act as a back-light, controlled by the framebuffer system - backlight
@@ -111,8 +109,7 @@ properties: brightness and duration (in ms). The exact format is described in: Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt
- allOf:
- $ref: /schemas/types.yaml#definitions/uint32-matrix
- $ref: /schemas/types.yaml#definitions/uint32-matrix items: minItems: 2 maxItems: 2
diff --git a/Documentation/devicetree/bindings/leds/leds-gpio.yaml b/Documentation/devicetree/bindings/leds/leds-gpio.yaml index 0e75b185dd19..7ad2baeda0b0 100644 --- a/Documentation/devicetree/bindings/leds/leds-gpio.yaml +++ b/Documentation/devicetree/bindings/leds/leds-gpio.yaml @@ -24,8 +24,7 @@ patternProperties: "(^led-[0-9a-f]$|led)": type: object
- allOf:
- $ref: common.yaml#
$ref: common.yaml#
properties: gpios:
diff --git a/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml b/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml index 90edf9d33b33..aa715edd93b0 100644 --- a/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml +++ b/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml @@ -34,11 +34,11 @@ patternProperties: #- $ref: "common.yaml#" rohm,led-compatible: description: LED identification string
allOf:- $ref: "/schemas/types.yaml#/definitions/string"- enum:- bd71828-ambled- bd71828-grnled
$ref: "/schemas/types.yaml#/definitions/string"enum:- bd71828-ambled- bd71828-grnled function: description: Purpose of LED as defined in dt-bindings/leds/common.hdiff --git a/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml b/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml index db851541d619..3b7ab61a144f 100644 --- a/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml +++ b/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml @@ -49,9 +49,8 @@ properties:
st,proc-id: description: Processor id using the mailbox (0 or 1)
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32- enum: [ 0, 1 ]
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1]
required:
- compatible
diff --git a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml index 5a1da4029c37..b902495d278b 100644 --- a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml +++ b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml @@ -77,13 +77,11 @@ properties:
amlogic,ao-sysctrl: description: should point to the AOBUS sysctrl node
- allOf:
- $ref: /schemas/types.yaml#/definitions/phandle
$ref: /schemas/types.yaml#/definitions/phandle
amlogic,canvas: description: should point to a canvas provider node
- allOf:
- $ref: /schemas/types.yaml#/definitions/phandle
- $ref: /schemas/types.yaml#/definitions/phandle
allOf:
- if:
diff --git a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml b/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml index 95ffa8bc0533..c08e2ddf292a 100644 --- a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml +++ b/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml @@ -35,8 +35,7 @@ properties:
hdmi-phandle: description: phandle to the HDMI controller
- allOf:
- $ref: /schemas/types.yaml#/definitions/phandle
- $ref: /schemas/types.yaml#/definitions/phandle
allOf:
- if:
diff --git a/Documentation/devicetree/bindings/media/rc.yaml b/Documentation/devicetree/bindings/media/rc.yaml index b27c9385d490..ded2ac43237d 100644 --- a/Documentation/devicetree/bindings/media/rc.yaml +++ b/Documentation/devicetree/bindings/media/rc.yaml @@ -18,136 +18,135 @@ properties: description: Specifies the scancode/key mapping table defined in-kernel for the remote controller.
- allOf:
- $ref: '/schemas/types.yaml#/definitions/string'- enum:- rc-adstech-dvb-t-pci- rc-alink-dtu-m- rc-anysee- rc-apac-viewcomp- rc-astrometa-t2hybrid- rc-asus-pc39- rc-asus-ps3-100- rc-ati-tv-wonder-hd-600- rc-ati-x10- rc-avermedia- rc-avermedia-a16d- rc-avermedia-cardbus- rc-avermedia-dvbt- rc-avermedia-m135a- rc-avermedia-m733a-rm-k6- rc-avermedia-rm-ks- rc-avertv-303- rc-azurewave-ad-tu700- rc-beelink-gs1- rc-behold- rc-behold-columbus- rc-budget-ci-old- rc-cec- rc-cinergy- rc-cinergy-1400- rc-d680-dmb- rc-delock-61959- rc-dib0700-nec- rc-dib0700-rc5- rc-digitalnow-tinytwin- rc-digittrade- rc-dm1105-nec- rc-dntv-live-dvb-t- rc-dntv-live-dvbt-pro- rc-dtt200u- rc-dvbsky- rc-dvico-mce- rc-dvico-portable- rc-em-terratec- rc-empty- rc-encore-enltv- rc-encore-enltv-fm53- rc-encore-enltv2- rc-evga-indtube- rc-eztv- rc-flydvb- rc-flyvideo- rc-fusionhdtv-mce- rc-gadmei-rm008z- rc-geekbox- rc-genius-tvgo-a11mce- rc-gotview7135- rc-hauppauge- rc-hisi-poplar- rc-hisi-tv-demo- rc-imon-mce- rc-imon-pad- rc-imon-rsc- rc-iodata-bctv7e- rc-it913x-v1- rc-it913x-v2- rc-kaiomy- rc-khadas- rc-kworld-315u- rc-kworld-pc150u- rc-kworld-plus-tv-analog- rc-leadtek-y04g0051- rc-lme2510- rc-manli- rc-medion-x10- rc-medion-x10-digitainer- rc-medion-x10-or2x- rc-msi-digivox-ii- rc-msi-digivox-iii- rc-msi-tvanywhere- rc-msi-tvanywhere-plus- rc-nebula- rc-nec-terratec-cinergy-xs- rc-norwood- rc-npgtech- rc-odroid- rc-pctv-sedna- rc-pinnacle-color- rc-pinnacle-grey- rc-pinnacle-pctv-hd- rc-pixelview- rc-pixelview-002t- rc-pixelview-mk12- rc-pixelview-new- rc-powercolor-real-angel- rc-proteus-2309- rc-purpletv- rc-pv951- rc-rc5-tv- rc-rc6-mce- rc-real-audio-220-32-keys- rc-reddo- rc-snapstream-firefly- rc-streamzap- rc-su3000- rc-tango- rc-tanix-tx3mini- rc-tanix-tx5max- rc-tbs-nec- rc-technisat-ts35- rc-technisat-usb2- rc-terratec-cinergy-c-pci- rc-terratec-cinergy-s2-hd- rc-terratec-cinergy-xs- rc-terratec-slim- rc-terratec-slim-2- rc-tevii-nec- rc-tivo- rc-total-media-in-hand- rc-total-media-in-hand-02- rc-trekstor- rc-tt-1500- rc-twinhan-dtv-cab-ci- rc-twinhan1027- rc-videomate-k100- rc-videomate-s350- rc-videomate-tv-pvr- rc-videostrong-kii-pro- rc-wetek-hub- rc-wetek-play2- rc-winfast- rc-winfast-usbii-deluxe- rc-x96max- rc-xbox-dvd- rc-zx-irdec
- $ref: '/schemas/types.yaml#/definitions/string'
- enum:
- rc-adstech-dvb-t-pci- rc-alink-dtu-m- rc-anysee- rc-apac-viewcomp- rc-astrometa-t2hybrid- rc-asus-pc39- rc-asus-ps3-100- rc-ati-tv-wonder-hd-600- rc-ati-x10- rc-avermedia- rc-avermedia-a16d- rc-avermedia-cardbus- rc-avermedia-dvbt- rc-avermedia-m135a- rc-avermedia-m733a-rm-k6- rc-avermedia-rm-ks- rc-avertv-303- rc-azurewave-ad-tu700- rc-beelink-gs1- rc-behold- rc-behold-columbus- rc-budget-ci-old- rc-cec- rc-cinergy- rc-cinergy-1400- rc-d680-dmb- rc-delock-61959- rc-dib0700-nec- rc-dib0700-rc5- rc-digitalnow-tinytwin- rc-digittrade- rc-dm1105-nec- rc-dntv-live-dvb-t- rc-dntv-live-dvbt-pro- rc-dtt200u- rc-dvbsky- rc-dvico-mce- rc-dvico-portable- rc-em-terratec- rc-empty- rc-encore-enltv- rc-encore-enltv-fm53- rc-encore-enltv2- rc-evga-indtube- rc-eztv- rc-flydvb- rc-flyvideo- rc-fusionhdtv-mce- rc-gadmei-rm008z- rc-geekbox- rc-genius-tvgo-a11mce- rc-gotview7135- rc-hauppauge- rc-hisi-poplar- rc-hisi-tv-demo- rc-imon-mce- rc-imon-pad- rc-imon-rsc- rc-iodata-bctv7e- rc-it913x-v1- rc-it913x-v2- rc-kaiomy- rc-khadas- rc-kworld-315u- rc-kworld-pc150u- rc-kworld-plus-tv-analog- rc-leadtek-y04g0051- rc-lme2510- rc-manli- rc-medion-x10- rc-medion-x10-digitainer- rc-medion-x10-or2x- rc-msi-digivox-ii- rc-msi-digivox-iii- rc-msi-tvanywhere- rc-msi-tvanywhere-plus- rc-nebula- rc-nec-terratec-cinergy-xs- rc-norwood- rc-npgtech- rc-odroid- rc-pctv-sedna- rc-pinnacle-color- rc-pinnacle-grey- rc-pinnacle-pctv-hd- rc-pixelview- rc-pixelview-002t- rc-pixelview-mk12- rc-pixelview-new- rc-powercolor-real-angel- rc-proteus-2309- rc-purpletv- rc-pv951- rc-rc5-tv- rc-rc6-mce- rc-real-audio-220-32-keys- rc-reddo- rc-snapstream-firefly- rc-streamzap- rc-su3000- rc-tango- rc-tanix-tx3mini- rc-tanix-tx5max- rc-tbs-nec- rc-technisat-ts35- rc-technisat-usb2- rc-terratec-cinergy-c-pci- rc-terratec-cinergy-s2-hd- rc-terratec-cinergy-xs- rc-terratec-slim- rc-terratec-slim-2- rc-tevii-nec- rc-tivo- rc-total-media-in-hand- rc-total-media-in-hand-02- rc-trekstor- rc-tt-1500- rc-twinhan-dtv-cab-ci- rc-twinhan1027- rc-videomate-k100- rc-videomate-s350- rc-videomate-tv-pvr- rc-videostrong-kii-pro- rc-wetek-hub- rc-wetek-play2- rc-winfast- rc-winfast-usbii-deluxe- rc-x96max- rc-xbox-dvd- rc-zx-irdecdiff --git a/Documentation/devicetree/bindings/media/renesas,vin.yaml b/Documentation/devicetree/bindings/media/renesas,vin.yaml index ecc09f1124d4..6d473cdcb16a 100644 --- a/Documentation/devicetree/bindings/media/renesas,vin.yaml +++ b/Documentation/devicetree/bindings/media/renesas,vin.yaml @@ -116,10 +116,9 @@ properties: #The per-board settings for Gen3 and RZ/G2 platforms: renesas,id: description: VIN channel number
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32- minimum: 0- maximum: 15
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 15
ports: type: object
diff --git a/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml b/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml index cdfe3f7f0ea9..0dc008e816e2 100644 --- a/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml @@ -51,11 +51,10 @@ patternProperties: maxItems: 1
reg-io-width:
allOf:- $ref: /schemas/types.yaml#/definitions/uint32- enum: [1, 2] description: Data width in bytes (1 or 2). If omitted, default of 1 is used.
$ref: /schemas/types.yaml#/definitions/uint32enum: [1, 2] samsung,srom-page-mode: description:@@ -64,11 +63,10 @@ patternProperties: type: boolean
samsung,srom-timing:
allOf:- $ref: /schemas/types.yaml#/definitions/uint32-array- items:minItems: 6maxItems: 6
$ref: /schemas/types.yaml#/definitions/uint32-arrayitems:minItems: 6maxItems: 6 description: | Array of 6 integers, specifying bank timings in the following order: Tacp, Tcah, Tcoh, Tacc, Tcos, Tacs.diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml index 3e0a8a92d652..a3b36dea88b6 100644 --- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml @@ -73,10 +73,9 @@ patternProperties: timings
nvidia,emc-auto-cal-interval:
allOf:- $ref: /schemas/types.yaml#/definitions/uint32 description: pad calibration interval in microseconds
$ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 2097151@@ -136,11 +135,10 @@ patternProperties: value of the EMC_XM2DQSPADCTRL2 register for this set of timings
nvidia,emc-zcal-cnt-long:
allOf:- $ref: /schemas/types.yaml#/definitions/uint32 description: number of EMC clocks to wait before issuing any commands after clock change
$ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 1023@@ -150,12 +148,11 @@ patternProperties: value of the EMC_ZCAL_INTERVAL register for this set of timings
nvidia,emc-configuration:
allOf:- $ref: /schemas/types.yaml#/definitions/uint32-array description: EMC timing characterization data. These are the registers (see section "15.6.2 EMC Registers" in the TRM) whose values need to be specified, according to the board documentation.
$ref: /schemas/types.yaml#/definitions/uint32-array items: - description: EMC_RC - description: EMC_RFCdiff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-mc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-mc.yaml index 22a94b6fdbde..30d9fb193d7f 100644 --- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-mc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-mc.yaml @@ -60,8 +60,7 @@ patternProperties: maximum: 1066000000
nvidia,emem-configuration:
allOf:- $ref: /schemas/types.yaml#/definitions/uint32-array
$ref: /schemas/types.yaml#/definitions/uint32-array description: | Values to be written to the EMEM register block. See section "15.6.1 MC Registers" in the TRM.diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-emc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-emc.yaml index e4135bac6957..112bae2fcbbd 100644 --- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-emc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-emc.yaml @@ -56,10 +56,9 @@ patternProperties: maximum: 900000000
nvidia,emc-auto-cal-interval:
allOf:- $ref: /schemas/types.yaml#/definitions/uint32 description: Pad calibration interval in microseconds.
$ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 2097151@@ -79,11 +78,10 @@ patternProperties: Mode Register 0.
nvidia,emc-zcal-cnt-long:
allOf:- $ref: /schemas/types.yaml#/definitions/uint32 description: Number of EMC clocks to wait before issuing any commands after sending ZCAL_MRW_CMD.
$ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 1023@@ -98,12 +96,11 @@ patternProperties: FBIO "read" FIFO periodic resetting enabled.
nvidia,emc-configuration:
allOf:- $ref: /schemas/types.yaml#/definitions/uint32-array description: EMC timing characterization data. These are the registers (see section "18.13.2 EMC Registers" in the TRM) whose values need to be specified, according to the board documentation.
$ref: /schemas/types.yaml#/definitions/uint32-array items: - description: EMC_RC - description: EMC_RFCdiff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.yaml index 4b9196c83291..84fd57bcf0dc 100644 --- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.yaml @@ -77,8 +77,7 @@ patternProperties: maximum: 900000000
nvidia,emem-configuration:
allOf:- $ref: /schemas/types.yaml#/definitions/uint32-array
$ref: /schemas/types.yaml#/definitions/uint32-array description: | Values to be written to the EMEM register block. See section "18.13.1 MC Registers" in the TRM.diff --git a/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml b/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml index 39afacc447b2..f591332fc462 100644 --- a/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml +++ b/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml @@ -31,19 +31,19 @@ properties: description: A touchscreen is attached to the controller
allwinner,tp-sensitive-adjust:
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32- minimum: 0maximum: 15default: 15
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 15
default: 15
description: Sensitivity of pen down detection
allwinner,filter-type:
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32- minimum: 0maximum: 3default: 1
- $ref: /schemas/types.yaml#/definitions/uint32
- minimum: 0
- maximum: 3
- default: 1
- description: | Select median and averaging filter. Sample used for median / averaging filter:
diff --git a/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml b/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml index 4acda7ce3b44..f212fc6e1661 100644 --- a/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml +++ b/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml @@ -67,23 +67,22 @@ properties: description: One or two <index level filter> to describe break input configurations.
allOf:- $ref: /schemas/types.yaml#/definitions/uint32-matrix- items:items:- description: |"index" indicates on which break input (0 or 1) theconfiguration should be applied.enum: [ 0 , 1]- description: |"level" gives the active level (0=low or 1=high) of theinput signal for this configurationenum: [ 0, 1 ]- description: |"filter" gives the filtering value (up to 15) to be applied.maximum: 15minItems: 1maxItems: 2
$ref: /schemas/types.yaml#/definitions/uint32-matrixitems:items:- description: |"index" indicates on which break input (0 or 1) theconfiguration should be applied.enum: [0, 1]- description: |"level" gives the active level (0=low or 1=high) of theinput signal for this configurationenum: [0, 1]- description: |"filter" gives the filtering value (up to 15) to be applied.maximum: 15minItems: 1maxItems: 2required: - "#pwm-cells"
diff --git a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml index d9ad9260e348..a10dceae9bc5 100644 --- a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml +++ b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml @@ -29,8 +29,7 @@ properties: onkey: type: object
- allOf:
- $ref: ../input/input.yaml
$ref: ../input/input.yaml
properties: compatible:
@@ -68,8 +67,7 @@ properties: watchdog: type: object
- allOf:
- $ref: ../watchdog/watchdog.yaml
$ref: ../watchdog/watchdog.yaml
properties: compatible:
@@ -190,8 +188,7 @@ properties: description: STPMIC1 voltage regulators supplies
"^(buck[1-4]|ldo[1-6]|boost|vref_ddr|pwr_sw[1-2])$":
allOf:- $ref: ../regulator/regulator.yaml
$ref: ../regulator/regulator.yaml "^ldo[1-2,5-6]$": type: objectdiff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml index 7a39486b215a..19bdaf781853 100644 --- a/Documentation/devicetree/bindings/mfd/syscon.yaml +++ b/Documentation/devicetree/bindings/mfd/syscon.yaml @@ -52,9 +52,8 @@ properties: description: | The size (in bytes) of the IO accesses that should be performed on the device.
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32- enum: [ 1, 2, 4, 8 ]
$ref: /schemas/types.yaml#/definitions/uint32
enum: [1, 2, 4, 8]
hwlocks: maxItems: 1
diff --git a/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml index 200de9396036..987b287f3bff 100644 --- a/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml +++ b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml @@ -41,8 +41,8 @@ properties: patternProperties: "^sdhci@[0-9a-f]+$": type: object
- allOf:
- $ref: mmc-controller.yaml
- $ref: mmc-controller.yaml
- properties: compatible: enum:
diff --git a/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml index d43a0c557a44..d93f7794a85f 100644 --- a/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml +++ b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml @@ -36,91 +36,80 @@ properties:
cdns,phy-input-delay-sd-highspeed: description: Value of the delay in the input path for SD high-speed timing
- allOf:
- $ref: "/schemas/types.yaml#/definitions/uint32"- minimum: 0- maximum: 0x1f
$ref: "/schemas/types.yaml#/definitions/uint32"
minimum: 0
maximum: 0x1f
cdns,phy-input-delay-legacy: description: Value of the delay in the input path for legacy timing
- allOf:
- $ref: "/schemas/types.yaml#/definitions/uint32"- minimum: 0- maximum: 0x1f
$ref: "/schemas/types.yaml#/definitions/uint32"
minimum: 0
maximum: 0x1f
cdns,phy-input-delay-sd-uhs-sdr12: description: Value of the delay in the input path for SD UHS SDR12 timing
- allOf:
- $ref: "/schemas/types.yaml#/definitions/uint32"- minimum: 0- maximum: 0x1f
$ref: "/schemas/types.yaml#/definitions/uint32"
minimum: 0
maximum: 0x1f
cdns,phy-input-delay-sd-uhs-sdr25: description: Value of the delay in the input path for SD UHS SDR25 timing
- allOf:
- $ref: "/schemas/types.yaml#/definitions/uint32"- minimum: 0- maximum: 0x1f
$ref: "/schemas/types.yaml#/definitions/uint32"
minimum: 0
maximum: 0x1f
cdns,phy-input-delay-sd-uhs-sdr50: description: Value of the delay in the input path for SD UHS SDR50 timing
- allOf:
- $ref: "/schemas/types.yaml#/definitions/uint32"- minimum: 0- maximum: 0x1f
$ref: "/schemas/types.yaml#/definitions/uint32"
minimum: 0
maximum: 0x1f
cdns,phy-input-delay-sd-uhs-ddr50: description: Value of the delay in the input path for SD UHS DDR50 timing
- allOf:
- $ref: "/schemas/types.yaml#/definitions/uint32"- minimum: 0- maximum: 0x1f
$ref: "/schemas/types.yaml#/definitions/uint32"
minimum: 0
maximum: 0x1f
cdns,phy-input-delay-mmc-highspeed: description: Value of the delay in the input path for MMC high-speed timing
- allOf:
- $ref: "/schemas/types.yaml#/definitions/uint32"- minimum: 0- maximum: 0x1f
$ref: "/schemas/types.yaml#/definitions/uint32"
minimum: 0
maximum: 0x1f
cdns,phy-input-delay-mmc-ddr: description: Value of the delay in the input path for eMMC high-speed DDR timing
allOf:
- $ref: "/schemas/types.yaml#/definitions/uint32"- minimum: 0- maximum: 0x1f# PHY DLL clock delays: # Each delay property represents the fraction of the clock period. # The approximate delay value will be # (<delay property value>/128)*sdmclk_clock_period.
$ref: "/schemas/types.yaml#/definitions/uint32"
minimum: 0
maximum: 0x1f
cdns,phy-dll-delay-sdclk: description: | Value of the delay introduced on the sdclk output for all modes except HS200, HS400 and HS400_ES.
- allOf:
- $ref: "/schemas/types.yaml#/definitions/uint32"- minimum: 0- maximum: 0x7f
$ref: "/schemas/types.yaml#/definitions/uint32"
minimum: 0
maximum: 0x7f
cdns,phy-dll-delay-sdclk-hsmmc: description: | Value of the delay introduced on the sdclk output for HS200, HS400 and HS400_ES speed modes.
- allOf:
- $ref: "/schemas/types.yaml#/definitions/uint32"- minimum: 0- maximum: 0x7f
$ref: "/schemas/types.yaml#/definitions/uint32"
minimum: 0
maximum: 0x7f
cdns,phy-dll-delay-strobe: description: | Value of the delay introduced on the dat_strobe input used in HS400 / HS400_ES speed modes.
- allOf:
- $ref: "/schemas/types.yaml#/definitions/uint32"- minimum: 0- maximum: 0x7f
- $ref: "/schemas/types.yaml#/definitions/uint32"
- minimum: 0
- maximum: 0x7f
required:
- compatible
diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml index acc9f10871d4..4931fab34d81 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml +++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml @@ -76,20 +76,18 @@ properties: # Other properties
bus-width:
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32- enum: [1, 4, 8]default: 1
$ref: /schemas/types.yaml#/definitions/uint32
enum: [1, 4, 8]
default: 1
max-frequency:
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32- minimum: 400000- maximum: 200000000
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 400000
maximum: 200000000
disable-wp: $ref: /schemas/types.yaml#/definitions/flag
@@ -212,13 +210,12 @@ properties: eMMC HS400 enhanced strobe mode is supported
dsr:
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32- minimum: 0- maximum: 0xffff
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 0xffff
no-sdio: $ref: /schemas/types.yaml#/definitions/flag
@@ -238,25 +235,23 @@ properties: initialization.
fixed-emmc-driver-type:
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32- minimum: 0- maximum: 4
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 4
post-power-on-delay-ms:
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32- default: 10
$ref: /schemas/types.yaml#/definitions/uint32
default: 10
supports-cqe: $ref: /schemas/types.yaml#/definitions/flag
@@ -333,8 +328,8 @@ patternProperties: - reg
"^clk-phase-(legacy|sd-hs|mmc-(hs|hs[24]00|ddr52)|uhs-(sdr(12|25|50|104)|ddr50))$":
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array
- $ref: /schemas/types.yaml#/definitions/uint32-array
- minItems: 2 maxItems: 2 items:
diff --git a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml index 4ee3ed6efab4..42d44cbf962f 100644 --- a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml +++ b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml @@ -76,8 +76,7 @@ properties: high speed modes.
rockchip,default-sample-phase:
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 360 default: 0
@@ -87,8 +86,7 @@ properties: If not specified 0 deg will be used.
rockchip,desired-num-phases:
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 360 default: 360
diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml index 890d47a87ac5..85bd528e9a14 100644 --- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml +++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml @@ -27,39 +27,35 @@ properties: clock to this at probe time.
fifo-depth:
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
card-detect-delay:
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32- default: 0
$ref: /schemas/types.yaml#/definitions/uint32
default: 0
data-addr:
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
fifo-watermark-aligned:
- allOf:
- $ref: /schemas/types.yaml#/definitions/flag
$ref: /schemas/types.yaml#/definitions/flag
dmas: maxItems: 1
diff --git a/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml b/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml index 5d3fa412aabd..c033ac3f147d 100644 --- a/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml +++ b/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml @@ -75,13 +75,12 @@ patternProperties: allwinner,rb: description: Contains the native Ready/Busy IDs.
allOf:- $ref: /schemas/types.yaml#/definitions/uint32-array- minItems: 1maxItems: 2items:minimum: 0maximum: 1
$ref: /schemas/types.yaml#/definitions/uint32-arrayminItems: 1maxItems: 2items:minimum: 0maximum: 1additionalProperties: false
diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml index d261b7096c69..cde7c4d79efe 100644 --- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml +++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml @@ -47,29 +47,26 @@ patternProperties: Contains the native Ready/Busy IDs.
nand-ecc-mode:
allOf:- $ref: /schemas/types.yaml#/definitions/string- enum: [ none, soft, hw, hw_syndrome, hw_oob_first, on-die ] description: Desired ECC engine, either hardware (most of the time embedded in the NAND controller) or software correction (Linux will handle the calculations). soft_bch is deprecated and should be replaced by soft and nand-ecc-algo.
$ref: /schemas/types.yaml#/definitions/stringenum: [none, soft, hw, hw_syndrome, hw_oob_first, on-die] nand-ecc-algo:
allOf:- $ref: /schemas/types.yaml#/definitions/string- enum: [ hamming, bch, rs ] description: Desired ECC algorithm.
$ref: /schemas/types.yaml#/definitions/stringenum: [hamming, bch, rs] nand-bus-width:
allOf:- $ref: /schemas/types.yaml#/definitions/uint32- enum: [ 8, 16 ]- default: 8 description: Bus width to the NAND chip
$ref: /schemas/types.yaml#/definitions/uint32enum: [8, 16]default: 8 nand-on-flash-bbt: $ref: /schemas/types.yaml#/definitions/flag@@ -83,18 +80,16 @@ patternProperties: build a volatile BBT in RAM.
nand-ecc-strength:
allOf:- $ref: /schemas/types.yaml#/definitions/uint32- minimum: 1 description: Maximum number of bits that can be corrected per ECC step.
$ref: /schemas/types.yaml#/definitions/uint32minimum: 1 nand-ecc-step-size:
allOf:- $ref: /schemas/types.yaml#/definitions/uint32- minimum: 1 description: Number of data bytes covered by a single ECC step.
$ref: /schemas/types.yaml#/definitions/uint32minimum: 1 nand-ecc-maximize: $ref: /schemas/types.yaml#/definitions/flagdiff --git a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml index 7a784dc4e513..798fa5fb7bb2 100644 --- a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml +++ b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml @@ -76,36 +76,35 @@ properties:
Please refer to 2.4.1 Message RAM Configuration in Bosch M_CAN user manual for details.
- allOf:
- $ref: /schemas/types.yaml#/definitions/int32-array- items:items:- description: The 'offset' is an address offset of the Message RAMwhere the following elements start from. This is usuallyset to 0x0 if you're using a private Message RAM.default: 0- description: 11-bit Filter 0-128 elements / 0-128 wordsminimum: 0maximum: 128- description: 29-bit Filter 0-64 elements / 0-128 wordsminimum: 0maximum: 64- description: Rx FIFO 0 0-64 elements / 0-1152 wordsminimum: 0maximum: 64- description: Rx FIFO 1 0-64 elements / 0-1152 wordsminimum: 0maximum: 64- description: Rx Buffers 0-64 elements / 0-1152 wordsminimum: 0maximum: 64- description: Tx Event FIFO 0-32 elements / 0-64 wordsminimum: 0maximum: 32- description: Tx Buffers 0-32 elements / 0-576 wordsminimum: 0maximum: 32maxItems: 1
$ref: /schemas/types.yaml#/definitions/int32-array
items:
items:- description: The 'offset' is an address offset of the Message RAM wherethe following elements start from. This is usually set to 0x0 ifyou're using a private Message RAM.default: 0- description: 11-bit Filter 0-128 elements / 0-128 wordsminimum: 0maximum: 128- description: 29-bit Filter 0-64 elements / 0-128 wordsminimum: 0maximum: 64- description: Rx FIFO 0 0-64 elements / 0-1152 wordsminimum: 0maximum: 64- description: Rx FIFO 1 0-64 elements / 0-1152 wordsminimum: 0maximum: 64- description: Rx Buffers 0-64 elements / 0-1152 wordsminimum: 0maximum: 64- description: Tx Event FIFO 0-32 elements / 0-64 wordsminimum: 0maximum: 32- description: Tx Buffers 0-32 elements / 0-576 wordsminimum: 0maximum: 32maxItems: 1
can-transceiver: $ref: can-transceiver.yaml#
diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml index ac471b60ed6a..1c4474036d46 100644 --- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml @@ -14,25 +14,23 @@ properties: pattern: "^ethernet(@.*)?$"
local-mac-address:
- allOf:
- $ref: /schemas/types.yaml#definitions/uint8-array- items:- minItems: 6maxItems: 6
$ref: /schemas/types.yaml#definitions/uint8-array
items:
- minItems: 6maxItems: 6mac-address:
- allOf:
- $ref: /schemas/types.yaml#definitions/uint8-array- items:- minItems: 6maxItems: 6
$ref: /schemas/types.yaml#definitions/uint8-array
items:
- minItems: 6maxItems: 6max-frame-size: $ref: /schemas/types.yaml#definitions/uint32
@@ -133,15 +131,14 @@ properties: is used for components that can have configurable fifo sizes.
managed:
- allOf:
- $ref: /schemas/types.yaml#definitions/string- default: autoenum:- auto- in-band-status
$ref: /schemas/types.yaml#definitions/string
default: auto
enum:
- auto- in-band-statusfixed-link: allOf:
@@ -183,11 +180,10 @@ properties: then: properties: speed:
allOf:- $ref: /schemas/types.yaml#definitions/uint32- enum: [10, 100, 1000] description: Link speed.
$ref: /schemas/types.yaml#definitions/uint32enum: [10, 100, 1000] full-duplex: $ref: /schemas/types.yaml#definitions/flagdiff --git a/Documentation/devicetree/bindings/net/qca,ar803x.yaml b/Documentation/devicetree/bindings/net/qca,ar803x.yaml index 5a6c9d20c0ba..1788884b8c28 100644 --- a/Documentation/devicetree/bindings/net/qca,ar803x.yaml +++ b/Documentation/devicetree/bindings/net/qca,ar803x.yaml @@ -20,15 +20,13 @@ allOf: properties: qca,clk-out-frequency: description: Clock output frequency in Hertz.
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32- enum: [ 25000000, 50000000, 62500000, 125000000 ]
$ref: /schemas/types.yaml#/definitions/uint32
enum: [25000000, 50000000, 62500000, 125000000]
qca,clk-out-strength: description: Clock output driver strength.
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32- enum: [ 0, 1, 2 ]
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2]
qca,keep-pll-enabled: description: |
@@ -52,17 +50,14 @@ properties: type: object description: Initial data for the VDDIO regulator. Set this to 1.5V or 1.8V.
- allOf:
- $ref: /schemas/regulator/regulator.yaml
$ref: /schemas/regulator/regulator.yaml
vddh-regulator: type: object description: Dummy subnode to model the external connection of the PHY VDDH regulator to VDDIO.
- allOf:
- $ref: /schemas/regulator/regulator.yaml
- $ref: /schemas/regulator/regulator.yaml
examples:
- |
diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml index e08cd4c4d568..3c825c74d596 100644 --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml @@ -199,14 +199,13 @@ properties:
snps,reset-delays-us: deprecated: true
- allOf:
- $ref: /schemas/types.yaml#definitions/uint32-array- minItems: 3maxItems: 3
$ref: /schemas/types.yaml#definitions/uint32-array
minItems: 3
maxItems: 3
snps,aal: $ref: /schemas/types.yaml#definitions/flag
@@ -301,27 +300,24 @@ allOf: then: properties: snps,pbl:
allOf:- $ref: /schemas/types.yaml#definitions/uint32- enum: [2, 4, 8] description: Programmable Burst Length (tx and rx)
$ref: /schemas/types.yaml#definitions/uint32enum: [2, 4, 8] snps,txpbl:
allOf:- $ref: /schemas/types.yaml#definitions/uint32- enum: [2, 4, 8] description: Tx Programmable Burst Length. If set, DMA tx will use this value rather than snps,pbl.
$ref: /schemas/types.yaml#definitions/uint32enum: [2, 4, 8] snps,rxpbl:
allOf:- $ref: /schemas/types.yaml#definitions/uint32- enum: [2, 4, 8] description: Rx Programmable Burst Length. If set, DMA rx will use this value rather than snps,pbl.
$ref: /schemas/types.yaml#definitions/uint32enum: [2, 4, 8] snps,no-pbl-x8: $ref: /schemas/types.yaml#definitions/flagdiff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml index 8fc8d3be303b..1dd5a9bd9db7 100644 --- a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml +++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml @@ -150,10 +150,9 @@ properties: patternProperties: "^mdio@": type: object
- allOf:
- $ref: "ti,davinci-mdio.yaml#"
- $ref: "ti,davinci-mdio.yaml#"
required: diff --git a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml index 2ea14ab29254..d454c1fab930 100644 --- a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml +++ b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml @@ -40,10 +40,9 @@ properties: ti,hwmods: description: TI hwmod name deprecated: true
- allOf:
- $ref: /schemas/types.yaml#/definitions/string-array- items:const: davinci_mdio
- $ref: /schemas/types.yaml#/definitions/string-array
- items:
const: davinci_mdioif: properties: diff --git a/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml b/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml index 48a98dae00de..64b2c64ca806 100644 --- a/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml @@ -71,10 +71,9 @@ properties:
max-link-speed: description: Specify PCI Gen for link capability.
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32- enum: [ 1, 2, 3, 4 ]- default: 1
$ref: /schemas/types.yaml#/definitions/uint32
enum: [1, 2, 3, 4]
default: 1
bus-range: description: Range of bus numbers associated with this controller.
diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml index bfefd09d8c1e..7556be6e2754 100644 --- a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml @@ -84,13 +84,12 @@ properties: gpio-line-names: true
input-debounce:
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array- minItems: 1maxItems: 5
- $ref: /schemas/types.yaml#/definitions/uint32-array
- minItems: 1
- maxItems: 5
patternProperties: # It's pretty scary, but the basic idea is that: @@ -115,9 +114,8 @@ patternProperties: bias-pull-down: true
drive-strength:
allOf:- $ref: /schemas/types.yaml#/definitions/uint32- enum: [ 10, 20, 30, 40 ]
$ref: /schemas/types.yaml#/definitions/uint32enum: [10, 20, 30, 40]required: - pins
diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml index 7651a675ab2d..017d9593573b 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml @@ -33,26 +33,23 @@ patternProperties: then: patternProperties: "^function|groups$":
allOf:- $ref: "/schemas/types.yaml#/definitions/string"- enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14,ADC15, ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT,DDCCLK, DDCDAT, EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2,GPID4, GPID6, GPIE0, GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12,I2C13, I2C14, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, LPCPD,LPCPME, LPCRST, LPCSMI, MAC1LINK, MAC2LINK, MDIO1, MDIO2, NCTS1,NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2,NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NDTS4, NRI1, NRI2,NRI3, NRI4, NRTS1, NRTS2, NRTS3, OSCCLK, PWM0, PWM1, PWM2, PWM3,PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, RMII2, ROM16,ROM8, ROMCS1, ROMCS2, ROMCS3, ROMCS4, RXD1, RXD2, RXD3, RXD4,SALT1, SALT2, SALT3, SALT4, SD1, SD2, SGPMCK, SGPMI, SGPMLD,SGPMO, SGPSCK, SGPSI0, SGPSI1, SGPSLD, SIOONCTRL, SIOPBI, SIOPBO,SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1DEBUG,SPI1PASSTHRU, SPICS1, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7,TIMER8, TXD1, TXD2, TXD3, TXD4, UART6, USB11D1, USB11H2, USB2D1,USB2H1, USBCKI, VGABIOS_ROM, VGAHS, VGAVS, VPI18, VPI24, VPI30,VPO12, VPO24, WDTRST1, WDTRST2 ]
$ref: "/schemas/types.yaml#/definitions/string"enum: [ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT,EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2, GPID4, GPID6, GPIE0,GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4,I2C5, I2C6, I2C7, I2C8, I2C9, LPCPD, LPCPME, LPCRST, LPCSMI, MAC1LINK,MAC2LINK, MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2,NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4,NDTS4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, OSCCLK, PWM0,PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1,RMII2, ROM16, ROM8, ROMCS1, ROMCS2, ROMCS3, ROMCS4, RXD1, RXD2, RXD3,RXD4, SALT1, SALT2, SALT3, SALT4, SD1, SD2, SGPMCK, SGPMI, SGPMLD,SGPMO, SGPSCK, SGPSI0, SGPSI1, SGPSLD, SIOONCTRL, SIOPBI, SIOPBO,SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1DEBUG, SPI1PASSTHRU,SPICS1, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2,TXD3, TXD4, UART6, USB11D1, USB11H2, USB2D1, USB2H1, USBCKI, VGABIOS_ROM,VGAHS, VGAVS, VPI18, VPI24, VPI30, VPO12, VPO24, WDTRST1, WDTRST2]required:
- compatible
diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml index 36feaf5e2dff..0172b78e2f27 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml @@ -29,8 +29,8 @@ properties: aspeed,external-nodes: minItems: 2 maxItems: 2
- allOf:
- $ref: /schemas/types.yaml#/definitions/phandle-array
- $ref: /schemas/types.yaml#/definitions/phandle-array
- description: | A cell of phandles to external controller nodes: 0: compatible with "aspeed,ast2500-gfx", "syscon"
@@ -43,28 +43,25 @@ patternProperties: then: patternProperties: "^function|groups$":
allOf:- $ref: "/schemas/types.yaml#/definitions/string"- enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14,ADC15, ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT,DDCCLK, DDCDAT, ESPI, FWSPICS1, FWSPICS2, GPID0, GPID2, GPID4,GPID6, GPIE0, GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13,I2C14, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, LAD0, LAD1,LAD2, LAD3, LCLK, LFRAME, LPCHC, LPCPD, LPCPLUS, LPCPME, LPCRST,LPCSMI, LSIRQ, MAC1LINK, MAC2LINK, MDIO1, MDIO2, NCTS1, NCTS2,NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3,NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1,NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PNOR, PWM0, PWM1, PWM2,PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, RMII2, RXD1,RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, SALT14,SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT9, SCL1,SCL2, SD1, SD2, SDA1, SDA2, SGPS1, SGPS2, SIOONCTRL, SIOPBI,SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1CS1,SPI1DEBUG, SPI1PASSTHRU, SPI2CK, SPI2CS0, SPI2CS1, SPI2MISO,SPI2MOSI, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1,TXD2, TXD3, TXD4, UART6, USB11BHID, USB2AD, USB2AH, USB2BD,USB2BH, USBCKI, VGABIOSROM, VGAHS, VGAVS, VPI24, VPO, WDTRST1,WDTRST2, ]
$ref: "/schemas/types.yaml#/definitions/string"enum: [ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT,ESPI, FWSPICS1, FWSPICS2, GPID0, GPID2, GPID4, GPID6, GPIE0, GPIE2,GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, I2C5,I2C6, I2C7, I2C8, I2C9, LAD0, LAD1, LAD2, LAD3, LCLK, LFRAME, LPCHC,LPCPD, LPCPLUS, LPCPME, LPCRST, LPCSMI, LSIRQ, MAC1LINK, MAC2LINK,MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4,NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2,NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PNOR, PWM0,PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1,RMII2, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13,SALT14, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT9, SCL1,SCL2, SD1, SD2, SDA1, SDA2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO,SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1CS1, SPI1DEBUG,SPI1PASSTHRU, SPI2CK, SPI2CS0, SPI2CS1, SPI2MISO, SPI2MOSI, TIMER3,TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, TXD3, TXD4, UART6,USB11BHID, USB2AD, USB2AH, USB2BD, USB2BH, USBCKI, VGABIOSROM, VGAHS,VGAVS, VPI24, VPO, WDTRST1, WDTRST2]required:
- compatible
diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml index 45af29bc3202..1506726c7fea 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml @@ -30,64 +30,58 @@ patternProperties: then: properties: function:
allOf:- $ref: "/schemas/types.yaml#/definitions/string"- enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC,ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWSPIWP, GPIT0,GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1,GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, I2C1, I2C10, I2C11,I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, I2C6,I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ,LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2,MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2,NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3,NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1,NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PWM0, PWM1, PWM10, PWM11,PWM12, PWM13, PWM14, PWM15, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7,PWM8, PWM9, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3,RMII4, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12,SALT13, SALT14, SALT15, SALT16, SALT2, SALT3, SALT4, SALT5,SALT6, SALT7, SALT8, SALT9, SD1, SD2, SGPM1, SGPS1, SIOONCTRL,SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1,SPI1ABR, SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1,TACH10, TACH11, TACH12, TACH13, TACH14, TACH15, TACH2, TACH3,TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, THRU1, THRU2,THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12, UART13,UART6, UART7, UART8, UART9, USBAD, USBADP, USB2AH, USB2AHP,USB2BD, USB2BH, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3,WDTRST4, ]
$ref: "/schemas/types.yaml#/definitions/string"enum: [ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2,ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC, ESPI, ESPIALT,FSI1, FSI2, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3,GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5,GPIU6, GPIU7, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14, I2C15, I2C16,I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5,I3C6, JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ,MACLINK1, MACLINK2, MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4,NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2,NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4,NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PWM0, PWM1, PWM10, PWM11,PWM12, PWM13, PWM14, PWM15, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, PWM8,PWM9, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4,RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, SALT14,SALT15, SALT16, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8,SALT9, SD1, SD2, SGPM1, SGPS1, SIOONCTRL, SIOPBI, SIOPBO, SIOPWREQ,SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1, SPI1WP, SPI2,SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, TACH12, TACH13, TACH14,TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0,THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12,UART13, UART6, UART7, UART8, UART9, USBAD, USBADP, USB2AH, USB2AHP,USB2BD, USB2BH, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4]groups:
allOf:- $ref: "/schemas/types.yaml#/definitions/string"- enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1,EMMCG4, EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID,FWQSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5,GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5, GPIU6,GPIU7, HVI3C3, HVI3C4, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14,I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9,I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD,LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, MACLINK3, MACLINK4,MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1,NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2,NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4,OSCCLK, PEWAKE, PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1,PWM12G0, PWM12G1, PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0,PWM15G1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1,PWM9G0, PWM9G1, QSPI1, QSPI2, RGMII1, RGMII2, RGMII3, RGMII4,RMII1, RMII2, RMII3, RMII4, RXD1, RXD2, RXD3, RXD4, SALT1,SALT10G0, SALT10G1, SALT11G0, SALT11G1, SALT12G0, SALT12G1,SALT13G0, SALT13G1, SALT14G0, SALT14G1, SALT15G0, SALT15G1,SALT16G0, SALT16G1, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7,SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPS1, SIOONCTRL,SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1,SPI1ABR, SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1,TACH10, TACH11, TACH12, TACH13, TACH14, TACH15, TACH2, TACH3,TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, THRU1, THRU2,THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12G0,UART12G1, UART13G0, UART13G1, UART6, UART7, UART8, UART9, USBA,USBB, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4, ]
$ref: "/schemas/types.yaml#/definitions/string"enum: [ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2,ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, EMMCG4,EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWQSPID, FWSPIWP,GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1,GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, HVI3C3, HVI3C4, I2C1, I2C10,I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5,I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ,LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, MACLINK3,MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, NCTS3, NCTS4,NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2,NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4,OSCCLK, PEWAKE, PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1, PWM12G0,PWM12G1, PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0, PWM15G1, PWM2,PWM3, PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1, PWM9G0, PWM9G1, QSPI1,QSPI2, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4,RXD1, RXD2, RXD3, RXD4, SALT1, SALT10G0, SALT10G1, SALT11G0, SALT11G1,SALT12G0, SALT12G1, SALT13G0, SALT13G1, SALT14G0, SALT14G1, SALT15G0,SALT15G1, SALT16G0, SALT16G1, SALT2, SALT3, SALT4, SALT5, SALT6,SALT7, SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPS1, SIOONCTRL,SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR,SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11,TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, TACH4, TACH5, TACH6,TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, THRU3, TXD1, TXD2, TXD3,TXD4, UART10, UART11, UART12G0, UART12G1, UART13G0, UART13G1, UART6,UART7, UART8, UART9, USBA, USBB, VB, VGAHS, VGAVS, WDTRST1, WDTRST2,WDTRST3, WDTRST4]required:
- compatible
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml index 6297e78418cf..d474bc1f393b 100644 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml @@ -37,22 +37,21 @@ patternProperties: be found in <arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h>. The last integer CONFIG is the pad setting value like pull-up on this pin. Please refer to i.MX8M Plus Reference Manual for detailed CONFIG settings.
allOf:- $ref: /schemas/types.yaml#/definitions/uint32-matrix- items:items:- description: |"mux_reg" indicates the offset of mux register.- description: |"conf_reg" indicates the offset of pad configuration register.- description: |"input_reg" indicates the offset of select input register.- description: |"mux_val" indicates the mux value to be applied.- description: |"input_val" indicates the select input value to be applied.- description: |"pad_setting" indicates the pad configuration value to be applied.
$ref: /schemas/types.yaml#/definitions/uint32-matrixitems:items:- description: |"mux_reg" indicates the offset of mux register.- description: |"conf_reg" indicates the offset of pad configuration register.- description: |"input_reg" indicates the offset of select input register.- description: |"mux_val" indicates the mux value to be applied.- description: |"input_val" indicates the select input value to be applied.- description: |"pad_setting" indicates the pad configuration value to be applied.required: - fsl,pins
diff --git a/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml b/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml index cd2b436350ef..2c0acb405e6c 100644 --- a/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml +++ b/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml @@ -24,12 +24,10 @@ properties: patternProperties: '-pins$': type: object
- allOf:
- $ref: pincfg-node.yaml#- $ref: pinmux-node.yaml#
$ref: pinmux-node.yaml#
properties: function: true
diff --git a/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml b/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml index 732d9075560b..ef8877ddb1eb 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml +++ b/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml @@ -122,11 +122,10 @@ properties: this, "pins" or "pinmux" has to be specified)
pinmux:
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array
$ref: /schemas/types.yaml#/definitions/uint32-array
pinctrl-pin-array: $ref: /schemas/types.yaml#/definitions/uint32-array
diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml index 46a0478cb924..e9d6e54fc0a0 100644 --- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml @@ -37,21 +37,18 @@ properties: hwlocks: true
st,syscfg:
- allOf:
- $ref: "/schemas/types.yaml#/definitions/phandle-array"
$ref: "/schemas/types.yaml#/definitions/phandle-array"
st,package:
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32- enum: [1, 2, 4, 8]
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [1, 2, 4, 8]
patternProperties: '^gpio@[0-9a-f]*$': @@ -78,33 +75,31 @@ patternProperties: maximum: 16
st,bank-name:
allOf:- $ref: "/schemas/types.yaml#/definitions/string"- enum:- GPIOA- GPIOB- GPIOC- GPIOD- GPIOE- GPIOF- GPIOG- GPIOH- GPIOI- GPIOJ- GPIOK- GPIOZ description: Should be a name string for this bank as specified in the datasheet.
$ref: "/schemas/types.yaml#/definitions/string"enum:
st,bank-ioport:allOf:- $ref: "/schemas/types.yaml#/definitions/uint32"- minimum: 0- maximum: 11
- GPIOA- GPIOB- GPIOC- GPIOD- GPIOE- GPIOF- GPIOG- GPIOH- GPIOI- GPIOJ- GPIOK- GPIOZst,bank-ioport: description: Should correspond to the EXTI IOport selection (EXTI line used to select GPIOs as interrupts).$ref: "/schemas/types.yaml#/definitions/uint32"minimum: 0maximum: 11required: - gpio-controller
@@ -125,8 +120,8 @@ patternProperties: configuration, pullups, drive, output high/low and output speed. properties: pinmux:
allOf:- $ref: "/schemas/types.yaml#/definitions/uint32-array"
$ref: "/schemas/types.yaml#/definitions/uint32-array"description: | Integer array, represents gpio pin number and mux setting. Supported pin number and mux varies for different SoCs, and are@@ -180,9 +175,8 @@ patternProperties: 1: Medium speed 2: Fast speed 3: High speed
allOf:- $ref: /schemas/types.yaml#/definitions/uint32- enum: [0, 1, 2, 3]
$ref: /schemas/types.yaml#/definitions/uint32enum: [0, 1, 2, 3] required: - pinmuxdiff --git a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml index 6c6079fe1351..49fd3feabba5 100644 --- a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml +++ b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml @@ -56,8 +56,7 @@ properties:
amlogic,ao-sysctrl: description: phandle to the AO sysctrl node
- allOf:
- $ref: /schemas/types.yaml#/definitions/phandle
- $ref: /schemas/types.yaml#/definitions/phandle
required:
- compatible
diff --git a/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml b/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml index 4fe64f4dd594..fc799b0577d4 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml +++ b/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml @@ -78,12 +78,11 @@ properties: A list of PWM channels used as PWM outputs on particular platform. It is an array of up to 5 elements being indices of PWM channels (from 0 to 4), the order does not matter.
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array- uniqueItems: true- items:minimum: 0maximum: 4
- $ref: /schemas/types.yaml#/definitions/uint32-array
- uniqueItems: true
- items:
minimum: 0maximum: 4required:
- clocks
diff --git a/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml b/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml index 9d3b28417fb6..605590384b48 100644 --- a/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml @@ -46,24 +46,22 @@ properties: 0: LOW 1: HIGH Default is LOW if nothing else is specified.
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array- maxItems: 8items:enum: [ 0, 1 ]default: 0
$ref: /schemas/types.yaml#/definitions/uint32-array
maxItems: 8
items:
enum: [0, 1]default: 0states: description: Selection of available voltages/currents provided by this regulator and matching GPIO configurations to achieve them. If there are no states in the "states" array, use a fixed regulator instead.
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-matrix- maxItems: 8items:items:- description: Voltage in microvolts- description: GPIO group state value
$ref: /schemas/types.yaml#/definitions/uint32-matrix
maxItems: 8
items:
items:- description: Voltage in microvolts- description: GPIO group state valuestartup-delay-us: description: startup time in microseconds
@@ -81,12 +79,11 @@ properties:
regulator-type: description: Specifies what is being regulated.
- allOf:
- $ref: /schemas/types.yaml#/definitions/string- enum:- voltage- currentdefault: voltage
- $ref: /schemas/types.yaml#/definitions/string
- enum:
- voltage- current- default: voltage
required:
- compatible
diff --git a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml index a682af0dc67e..e5422eaf851d 100644 --- a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml +++ b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml @@ -21,17 +21,17 @@ properties:
regulators: type: object
- allOf:
- $ref: regulator.yaml#
$ref: regulator.yaml#
description: | list of regulators provided by this controller, must be named after their hardware counterparts BUCK[1-4], one LDORTC, and LDO[2-5]
properties: mps,switch-freq:
allOf:- $ref: "/schemas/types.yaml#/definitions/uint8"enum: [ 0, 1, 2, 3 ]
$ref: "/schemas/types.yaml#/definitions/uint8"enum: [0, 1, 2, 3] default: 2 description: | switching frequency must be one of following corresponding value@@ -40,32 +40,29 @@ properties: patternProperties: "^ldo[1-4]$": type: object
allOf:- $ref: regulator.yaml#
$ref: regulator.yaml# "^ldortc$": type: object
allOf:- $ref: regulator.yaml#
$ref: regulator.yaml# "^buck[1-4]$": type: object
allOf:- $ref: regulator.yaml#
$ref: regulator.yaml# properties: mps,buck-softstart:
allOf:- $ref: "/schemas/types.yaml#/definitions/uint8"enum: [ 0, 1, 2, 3 ]
$ref: "/schemas/types.yaml#/definitions/uint8"enum: [0, 1, 2, 3] description: | defines the soft start time of this buck, must be one of the following corresponding values 150us, 300us, 610us, 920us mps,buck-phase-delay:
allOf:- $ref: "/schemas/types.yaml#/definitions/uint8"enum: [ 0, 1, 2, 3 ]
$ref: "/schemas/types.yaml#/definitions/uint8"enum: [0, 1, 2, 3] description: | defines the phase delay of this buck, must be one of the following corresponding values 0deg, 90deg, 180deg, 270degdiff --git a/Documentation/devicetree/bindings/regulator/regulator.yaml b/Documentation/devicetree/bindings/regulator/regulator.yaml index 91a39a33000b..ec505dbbf87c 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/regulator.yaml @@ -123,9 +123,8 @@ properties: 0: Disable active discharge. 1: Enable active discharge. Absence of this property will leave configuration to default.
- allOf:
- $ref: "/schemas/types.yaml#/definitions/uint32"- enum: [ 0, 1 ]
$ref: "/schemas/types.yaml#/definitions/uint32"
enum: [0, 1]
regulator-coupled-with: description: Regulators with which the regulator is coupled. The linkage
diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml index 71ce032b8cf8..ac74e214b050 100644 --- a/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml @@ -24,10 +24,9 @@ description: | patternProperties: "^LDO[1-7]$": type: object
- allOf:
- $ref: regulator.yaml#
$ref: regulator.yaml#
properties: regulator-name:
@@ -37,10 +36,9 @@ patternProperties:
"^BUCK[1-7]$": type: object
- allOf:
- $ref: regulator.yaml#
$ref: regulator.yaml#
properties: regulator-name:
@@ -49,40 +47,36 @@ patternProperties: should be "buck1", ..., "buck7"
rohm,dvs-run-voltage:
allOf:- $ref: "/schemas/types.yaml#/definitions/uint32"- minimum: 0maximum: 3300000 description: PMIC default "RUN" state voltage in uV. See below table for bucks which support this. 0 means disabled.
$ref: "/schemas/types.yaml#/definitions/uint32"minimum: 0maximum: 3300000 rohm,dvs-idle-voltage:
allOf:- $ref: "/schemas/types.yaml#/definitions/uint32"- minimum: 0maximum: 3300000 description: PMIC default "IDLE" state voltage in uV. See below table for bucks which support this. 0 means disabled.
$ref: "/schemas/types.yaml#/definitions/uint32"minimum: 0maximum: 3300000 rohm,dvs-suspend-voltage:
allOf:- $ref: "/schemas/types.yaml#/definitions/uint32"- minimum: 0maximum: 3300000 description: PMIC default "SUSPEND" state voltage in uV. See below table for bucks which support this. 0 means disabled.
$ref: "/schemas/types.yaml#/definitions/uint32"minimum: 0maximum: 3300000 rohm,dvs-lpsr-voltage:
allOf:- $ref: "/schemas/types.yaml#/definitions/uint32"- minimum: 0maximum: 3300000 description: PMIC default "LPSR" state voltage in uV. See below table for bucks which support this. 0 means disabled.
$ref: "/schemas/types.yaml#/definitions/uint32"minimum: 0maximum: 3300000 # Supported default DVS states: # buck | run | idle | suspend | lpsrdiff --git a/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml b/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml index 64f1183ce841..cb336b2c16af 100644 --- a/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml +++ b/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml @@ -23,8 +23,7 @@ properties: - st,stm32mp1-booster
st,syscfg:
- allOf:
- $ref: "/schemas/types.yaml#/definitions/phandle-array"
$ref: "/schemas/types.yaml#/definitions/phandle-array" description: phandle to system configuration controller.
vdda-supply:
diff --git a/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml index 8d8f38fe85dc..e6322bc3e447 100644 --- a/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml +++ b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml @@ -26,8 +26,7 @@ patternProperties: "^(reg11|reg18|usb33)$": type: object
- allOf:
- $ref: "regulator.yaml#"
- $ref: "regulator.yaml#"
required:
- compatible
diff --git a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml index 4ff4d3df0a06..4ffa25268fcc 100644 --- a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml +++ b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml @@ -28,22 +28,20 @@ properties: maxItems: 1
st,syscfg-holdboot:
- allOf:
- $ref: "/schemas/types.yaml#/definitions/phandle-array"
$ref: "/schemas/types.yaml#/definitions/phandle-array" maxItems: 1
st,syscfg-tz:
- allOf:
- $ref: "/schemas/types.yaml#/definitions/phandle-array"
$ref: "/schemas/types.yaml#/definitions/phandle-array" maxItems: 1
interrupts:
@@ -90,8 +88,7 @@ properties: (see ../reserved-memory/reserved-memory.txt)
st,syscfg-pdds:
- allOf:
- $ref: "/schemas/types.yaml#/definitions/phandle-array"
- $ref: "/schemas/types.yaml#/definitions/phandle-array" description: | Reference to the system configuration which holds the remote 1st cell: phandle to syscon block
diff --git a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml index 8ac437282659..6b2d56cc3f38 100644 --- a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml +++ b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml @@ -21,8 +21,7 @@ properties:
intel,global-reset: description: Global reset register offset and bit offset.
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array
- $ref: /schemas/types.yaml#/definitions/uint32-array items:
- description: Register offset
- description: Register bit offset
diff --git a/Documentation/devicetree/bindings/riscv/cpus.yaml b/Documentation/devicetree/bindings/riscv/cpus.yaml index 04819ad379c2..f80ba2c66f71 100644 --- a/Documentation/devicetree/bindings/riscv/cpus.yaml +++ b/Documentation/devicetree/bindings/riscv/cpus.yaml @@ -40,24 +40,18 @@ properties: and identifies the type of the hart.
mmu-type:
- allOf:
- $ref: "/schemas/types.yaml#/definitions/string"- enum:- riscv,sv32- riscv,sv39- riscv,sv48
$ref: "/schemas/types.yaml#/definitions/string"
enum:
- riscv,sv32- riscv,sv39- riscv,sv48riscv,isa:
- allOf:
- $ref: "/schemas/types.yaml#/definitions/string"- enum:- rv64imac- rv64imafdc@@ -67,6 +61,10 @@ properties: While the isa strings in ISA specification are case insensitive, letters in the riscv,isa string must be all lowercase to simplify parsing.
$ref: "/schemas/types.yaml#/definitions/string"
enum:
- rv64imac- rv64imafdc# RISC-V requires 'timebase-frequency' in /cpus, so disallow it here timebase-frequency: false
diff --git a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml index 57b087574aa1..5456604b1c14 100644 --- a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml @@ -32,11 +32,10 @@ properties: maxItems: 1
st,syscfg:
- allOf:
- $ref: "/schemas/types.yaml#/definitions/phandle-array"- items:minItems: 3maxItems: 3
- $ref: "/schemas/types.yaml#/definitions/phandle-array"
- items:
minItems: 3maxItems: 3diff --git a/Documentation/devicetree/bindings/serial/pl011.yaml b/Documentation/devicetree/bindings/serial/pl011.yaml index 1a64d59152aa..c23c93b400f0 100644 --- a/Documentation/devicetree/bindings/serial/pl011.yaml +++ b/Documentation/devicetree/bindings/serial/pl011.yaml @@ -88,17 +88,15 @@ properties: description: Rate at which poll occurs when auto-poll is set. default 100ms.
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32- default: 100
$ref: /schemas/types.yaml#/definitions/uint32
default: 100
poll-timeout-ms: description: Poll timeout when auto-poll is set, default 3000ms.
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32- default: 3000
- $ref: /schemas/types.yaml#/definitions/uint32
- default: 3000
required:
- compatible
diff --git a/Documentation/devicetree/bindings/serial/rs485.yaml b/Documentation/devicetree/bindings/serial/rs485.yaml index 2b8261ea6d9c..8141e4aad530 100644 --- a/Documentation/devicetree/bindings/serial/rs485.yaml +++ b/Documentation/devicetree/bindings/serial/rs485.yaml @@ -16,20 +16,18 @@ maintainers: properties: rs485-rts-delay: description: prop-encoded-array <a b>
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array- items:items:- description:Delay between rts signal and beginning of data sent in milliseconds.It corresponds to the delay before sending data.default: 0maximum: 1000- description:Delay between end of data sent and rts signal in milliseconds.It corresponds to the delay after sending data and actual release of the line.default: 0maximum: 1000
$ref: /schemas/types.yaml#/definitions/uint32-array
items:
items:- description: Delay between rts signal and beginning of data sent inmilliseconds. It corresponds to the delay before sending data.default: 0maximum: 1000- description: Delay between end of data sent and rts signal in milliseconds.It corresponds to the delay after sending data and actual releaseof the line.default: 0maximum: 1000rs485-rts-active-low: description: drive RTS low when sending (default is high).
diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml index 9d2ce347875b..ff2f49fe322c 100644 --- a/Documentation/devicetree/bindings/serial/samsung_uart.yaml +++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml @@ -51,9 +51,8 @@ properties:
samsung,uart-fifosize: description: The fifo size supported by the UART channel.
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32- enum: [16, 64, 256]
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [16, 64, 256]
required:
- compatible
diff --git a/Documentation/devicetree/bindings/sound/adi,adau7118.yaml b/Documentation/devicetree/bindings/sound/adi,adau7118.yaml index 76ee695097bf..fb78967ee17b 100644 --- a/Documentation/devicetree/bindings/sound/adi,adau7118.yaml +++ b/Documentation/devicetree/bindings/sound/adi,adau7118.yaml @@ -35,23 +35,21 @@ properties: adi,decimation-ratio: description: | This property set's the decimation ratio of PDM to PCM audio data.
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32- enum: [64, 32, 16]default: 64
$ref: /schemas/types.yaml#/definitions/uint32
enum: [64, 32, 16]
default: 64
adi,pdm-clk-map: description: | The ADAU7118 has two PDM clocks for the four Inputs. Each input must be assigned to one of these two clocks. This property set's the mapping between the clocks and the inputs.
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array- minItems: 4maxItems: 4items:maximum: 1default: [0, 0, 1, 1]
- $ref: /schemas/types.yaml#/definitions/uint32-array
- minItems: 4
- maxItems: 4
- items:
maximum: 1- default: [0, 0, 1, 1]
required:
- "#sound-dai-cells"
diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml index ea1d2efb2aaa..98938db56285 100644 --- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml +++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml @@ -57,32 +57,31 @@ properties: A list of the connections between audio components. Each entry is a pair of strings, the first being the connection's sink, the second being the connection's source.
- allOf:
- $ref: /schemas/types.yaml#definitions/non-unique-string-array- minItems: 2maxItems: 18items:enum:
- $ref: /schemas/types.yaml#definitions/non-unique-string-array
- minItems: 2
- maxItems: 18
- items:
enum: # Audio Pins on the SoC
- HP- HPCOM- LINEIN- LINEOUT- MIC1- MIC2- MIC3
- HP- HPCOM- LINEIN- LINEOUT- MIC1- MIC2- MIC3 # Microphone Biases from the SoC
- HBIAS- MBIAS
- HBIAS- MBIAS # Board Connectors
- Headphone- Headset Mic- Line In- Line Out- Mic- Speaker
- Headphone- Headset Mic- Line In- Line Out- Mic- Speakerallwinner,codec-analog-controls: $ref: /schemas/types.yaml#/definitions/phandle
diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml index a495d5fc0d23..e8f716b5f875 100644 --- a/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml @@ -102,8 +102,7 @@ properties:
gpio@42: type: object
- allOf:
- $ref: ../gpio/qcom,wcd934x-gpio.yaml#
- $ref: ../gpio/qcom,wcd934x-gpio.yaml#
patternProperties: "^.*@[0-9a-f]+$": diff --git a/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml b/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml index b6c1dd2a9c5e..c8f0985a8738 100644 --- a/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml +++ b/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml @@ -96,43 +96,39 @@ properties:
renesas,dtdl: description: delay sync signal (setup) in transmit mode.
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32- enum:- 0 # no bit delay- 50 # 0.5-clock-cycle delay- 100 # 1-clock-cycle delay- 150 # 1.5-clock-cycle delay- 200 # 2-clock-cycle delay
$ref: /schemas/types.yaml#/definitions/uint32
enum:
- 0 # no bit delay- 50 # 0.5-clock-cycle delay- 100 # 1-clock-cycle delay- 150 # 1.5-clock-cycle delay- 200 # 2-clock-cycle delayrenesas,syncdl: description: delay sync signal (hold) in transmit mode
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32- enum:- 0 # no bit delay- 50 # 0.5-clock-cycle delay- 100 # 1-clock-cycle delay- 150 # 1.5-clock-cycle delay- 200 # 2-clock-cycle delay- 300 # 3-clock-cycle delay
$ref: /schemas/types.yaml#/definitions/uint32
enum:
- 0 # no bit delay- 50 # 0.5-clock-cycle delay- 100 # 1-clock-cycle delay- 150 # 1.5-clock-cycle delay- 200 # 2-clock-cycle delay- 300 # 3-clock-cycle delayrenesas,tx-fifo-size: # deprecated for soctype-specific bindings description: | Override the default TX fifo size. Unit is words. Ignored if 0.
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32- maxItems: 1
$ref: /schemas/types.yaml#/definitions/uint32
maxItems: 1 default: 64
renesas,rx-fifo-size: # deprecated for soctype-specific bindings description: | Override the default RX fifo size. Unit is words. Ignored if 0.
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32- maxItems: 1
- $ref: /schemas/types.yaml#/definitions/uint32
- maxItems: 1 default: 64
required: diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml index d8e5509a7081..c6a2f543648b 100644 --- a/Documentation/devicetree/bindings/spi/spi-controller.yaml +++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml @@ -115,24 +115,22 @@ patternProperties: Maximum SPI clocking speed of the device in Hz.
spi-rx-bus-width:
allOf:- $ref: /schemas/types.yaml#/definitions/uint32- enum: [ 1, 2, 4, 8 ]- default: 1 description: Bus width to the SPI bus used for read transfers.
$ref: /schemas/types.yaml#/definitions/uint32enum: [1, 2, 4, 8]default: 1 spi-rx-delay-us: description: Delay, in microseconds, after a read transfer. spi-tx-bus-width:
allOf:- $ref: /schemas/types.yaml#/definitions/uint32- enum: [ 1, 2, 4, 8 ]- default: 1 description: Bus width to the SPI bus used for write transfers.
$ref: /schemas/types.yaml#/definitions/uint32enum: [1, 2, 4, 8]default: 1 spi-tx-delay-us: description:diff --git a/Documentation/devicetree/bindings/spi/spi-pl022.yaml b/Documentation/devicetree/bindings/spi/spi-pl022.yaml index 22ba4e90655b..22999024477f 100644 --- a/Documentation/devicetree/bindings/spi/spi-pl022.yaml +++ b/Documentation/devicetree/bindings/spi/spi-pl022.yaml @@ -80,55 +80,48 @@ patternProperties: properties: pl022,interface: description: SPI interface type
allOf:- $ref: "/schemas/types.yaml#/definitions/uint32"- enum:- 0 # SPI- 1 # Texas Instruments Synchronous Serial Frame Format- 2 # Microwire (Half Duplex)
$ref: "/schemas/types.yaml#/definitions/uint32"enum:- 0 # SPI- 1 # Texas Instruments Synchronous Serial Frame Format- 2 # Microwire (Half Duplex) pl022,com-mode: description: Specifies the transfer mode
allOf:- $ref: "/schemas/types.yaml#/definitions/uint32"- enum:- 0 # interrupt mode- 1 # polling mode- 2 # DMA modedefault: 1
$ref: "/schemas/types.yaml#/definitions/uint32"enum:- 0 # interrupt mode- 1 # polling mode- 2 # DMA modedefault: 1 pl022,rx-level-trig: description: Rx FIFO watermark level
allOf:- $ref: "/schemas/types.yaml#/definitions/uint32"- minimum: 0maximum: 4
$ref: "/schemas/types.yaml#/definitions/uint32"minimum: 0maximum: 4 pl022,tx-level-trig: description: Tx FIFO watermark level
allOf:- $ref: "/schemas/types.yaml#/definitions/uint32"- minimum: 0maximum: 4
$ref: "/schemas/types.yaml#/definitions/uint32"minimum: 0maximum: 4 pl022,ctrl-len: description: Microwire interface - Control length
allOf:- $ref: "/schemas/types.yaml#/definitions/uint32"- minimum: 0x03maximum: 0x1f
$ref: "/schemas/types.yaml#/definitions/uint32"minimum: 0x03maximum: 0x1f pl022,wait-state: description: Microwire interface - Wait state
allOf:- $ref: "/schemas/types.yaml#/definitions/uint32"- enum: [ 0, 1 ]
$ref: "/schemas/types.yaml#/definitions/uint32"enum: [0, 1] pl022,duplex: description: Microwire interface - Full/Half duplex
allOf:- $ref: "/schemas/types.yaml#/definitions/uint32"- enum: [ 0, 1 ]
$ref: "/schemas/types.yaml#/definitions/uint32"enum: [0, 1]required:
- compatible
diff --git a/Documentation/devicetree/bindings/spi/spi-sifive.yaml b/Documentation/devicetree/bindings/spi/spi-sifive.yaml index 140e4351a19f..28040598bfae 100644 --- a/Documentation/devicetree/bindings/spi/spi-sifive.yaml +++ b/Documentation/devicetree/bindings/spi/spi-sifive.yaml @@ -50,18 +50,16 @@ properties: sifive,fifo-depth: description: Depth of hardware queues; defaults to 8
- allOf:
- $ref: "/schemas/types.yaml#/definitions/uint32"- enum: [ 8 ]- default: 8
$ref: "/schemas/types.yaml#/definitions/uint32"
enum: [8]
default: 8
sifive,max-bits-per-word: description: Maximum bits per word; defaults to 8
- allOf:
- $ref: "/schemas/types.yaml#/definitions/uint32"- enum: [ 0, 1, 2, 3, 4, 5, 6, 7, 8 ]- default: 8
- $ref: "/schemas/types.yaml#/definitions/uint32"
- enum: [0, 1, 2, 3, 4, 5, 6, 7, 8]
- default: 8
required:
- compatible
diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml index 2ddd39d96766..d7be931b42d2 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml @@ -73,12 +73,11 @@ properties: - const: calib_sel
"#qcom,sensors":
- allOf:
- $ref: /schemas/types.yaml#/definitions/uint32- minimum: 1- maximum: 16
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 1
maximum: 16
"#thermal-sensor-cells": const: 1
diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml index 6ff718ede184..d83a1f97f911 100644 --- a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml +++ b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml @@ -65,10 +65,9 @@ patternProperties: description: A timer node has up to 8 frame sub-nodes, each with the following properties. properties: frame-number:
allOf:- $ref: "/schemas/types.yaml#/definitions/uint32"- minimum: 0maximum: 7
$ref: "/schemas/types.yaml#/definitions/uint32"minimum: 0maximum: 7 interrupts: minItems: 1-- 2.20.1