[PATCH 1/8] ASoC: dt-bindings: max98396: add voltage supplies

The device is supplied with 3 core voltages (DVVDIO, DVDD, AVDD), and PVDD and/or VBAT.

Signed-off-by: Daniel Mack daniel@zonque.org --- .../bindings/sound/adi,max98396.yaml | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)

diff --git a/Documentation/devicetree/bindings/sound/adi,max98396.yaml b/Documentation/devicetree/bindings/sound/adi,max98396.yaml index ec4c10c2598a..a23ac8036e1c 100644 --- a/Documentation/devicetree/bindings/sound/adi,max98396.yaml +++ b/Documentation/devicetree/bindings/sound/adi,max98396.yaml @@ -24,6 +24,21 @@ properties: maxItems: 1 description: I2C address of the device.

+ avdd-supply: + description: A 1.8V supply that powers up the AVDD pin. + + dvdd-supply: + description: A 1.2V supply that powers up the DVDD pin. + + dvddio-supply: + description: A 1.2V or 1.8V supply that powers up the VDDIO pin. + + pvdd-supply: + description: A 3.0V to 20V supply that powers up the PVDD pin. + + vbat-supply: + description: A 3.3V to 5.5V supply that powers up the VBAT pin. + adi,vmon-slot-no: description: slot number of the voltage sense monitor $ref: "/schemas/types.yaml#/definitions/uint32" @@ -72,6 +87,10 @@ examples: max98396: amplifier@39 { compatible = "adi,max98396"; reg = <0x39>; + dvdd-supply = <&regulator_1v2>; + dvddio-supply = <&regulator_1v8>; + avdd-supply = <&regulator_1v8>; + pvdd-supply = <&regulator_pvdd>; adi,vmon-slot-no = <0>; adi,imon-slot-no = <1>; reset-gpios = <&gpio 4 GPIO_ACTIVE_LOW>;