At Tue, 22 Jul 2014 10:58:29 +0100, Daniel Drake wrote:
The Gigabyte BRIX BXBT-2707 is a mini-PC with Realtek ALC283 HDA, exposing a single headset jack.
However, the default pin config information only suggests that one pin is connected: a HP out jack (pin 0x21, default config 0x04211010).
The microphone input is behind pin 0x19, which has default config 0x411111f0 (i.e. unused), so it does not show up in userspace, and no microphone input is possible via the headset.
Override the pin config so that the headset mic can be used.
The overwritten value looks like the jack-detectable. Is it really so? Many headset jacks don't give the jack detection in the mic pin but relies on the headphone pin jack detection or use vendor-specific way.
thanks,
Takashi
Signed-off-by: Daniel Drake drake@endlessm.com
sound/pci/hda/patch_realtek.c | 9 +++++++++ 1 file changed, 9 insertions(+)
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 512582b..10f1848 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -4358,6 +4358,7 @@ enum { ALC255_FIXUP_HEADSET_MODE_NO_HP_MIC, ALC293_FIXUP_DELL1_MIC_NO_PRESENCE, ALC292_FIXUP_TPT440_DOCK,
- ALC283_FIXUP_BXBT2807_MIC,
};
static const struct hda_fixup alc269_fixups[] = { @@ -4792,6 +4793,13 @@ static const struct hda_fixup alc269_fixups[] = { .chained = true, .chain_id = ALC269_FIXUP_LIMIT_INT_MIC_BOOST },
- [ALC283_FIXUP_BXBT2807_MIC] = {
.type = HDA_FIXUP_PINS,
.v.pins = (const struct hda_pintbl[]) {
{ 0x19, 0x04a110f0 },
{ },
},
- },
};
static const struct snd_pci_quirk alc269_fixup_tbl[] = { @@ -5013,6 +5021,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x9e54, "LENOVO NB", ALC269_FIXUP_LENOVO_EAPD), SND_PCI_QUIRK_VENDOR(0x17aa, "Thinkpad", ALC269_FIXUP_THINKPAD_ACPI), SND_PCI_QUIRK(0x1b7d, 0xa831, "Ordissimo EVE2 ", ALC269VB_FIXUP_ORDISSIMO_EVE2), /* Also known as Malata PC-B1303 */
- SND_PCI_QUIRK(0x1458, 0xfa53, "Gigabyte BXBT-2807", ALC283_FIXUP_BXBT2807_MIC),
#if 0 /* Below is a quirk table taken from the old code. -- 1.9.1