Add functions for setting full-range speakers and controls to enable/disable the setting. Setting a speaker to full-range means that the channels won't have their bass redirected to the LFE channel.
Signed-off-by: Connor McAdams conmanx360@gmail.com --- sound/pci/hda/patch_ca0132.c | 117 +++++++++++++++++++++++++++++++++++ 1 file changed, 117 insertions(+)
diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index 1a5fb30b69ab..469cefe9a51a 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -147,6 +147,8 @@ enum { AE5_SOUND_FILTER_ENUM, ZXR_HEADPHONE_GAIN, SPEAKER_CHANNEL_CFG_ENUM, + SPEAKER_FULL_RANGE_FRONT, + SPEAKER_FULL_RANGE_REAR, #define EFFECTS_COUNT (EFFECT_END_NID - EFFECT_START_NID) };
@@ -592,6 +594,24 @@ static const struct ct_eq_preset ca0132_alt_eq_presets[] = { } };
+/* + * DSP reqs for handling full-range speakers/bass redirection. If a speaker is + * set as not being full range, and bass redirection is enabled, all + * frequencies below the crossover frequency are redirected to the LFE + * channel. If the surround configuration has no LFE channel, this can't be + * enabled. X-Bass must be disabled when using these. + */ +enum speaker_range_reqs { + SPEAKER_BASS_REDIRECT = 0x15, + SPEAKER_BASS_REDIRECT_XOVER_FREQ = 0x16, + /* Between 0x16-0x1a are the X-Bass reqs. */ + SPEAKER_FULL_RANGE_FRONT_L_R = 0x1a, + SPEAKER_FULL_RANGE_CENTER_LFE = 0x1b, + SPEAKER_FULL_RANGE_REAR_L_R = 0x1c, + SPEAKER_FULL_RANGE_SURROUND_L_R = 0x1d, + SPEAKER_BASS_REDIRECT_SUB_GAIN = 0x1e, +}; + /* * Definitions for the DSP req's to handle speaker tuning. These all belong to * module ID 0x96, the output effects module. @@ -1100,6 +1120,7 @@ struct ca0132_spec { unsigned char in_enum_val; unsigned char out_enum_val; unsigned char channel_cfg_val; + unsigned char speaker_range_val[2]; unsigned char mic_boost_enum_val; unsigned char smart_volume_setting; long fx_ctl_val[EFFECT_LEVEL_SLIDERS]; @@ -4259,6 +4280,50 @@ static void ae5_mmio_select_out(struct hda_codec *codec) ae5_ca0113_output_presets[spec->cur_out_type].vals[i]); }
+static int ca0132_alt_set_full_range_speaker(struct hda_codec *codec) +{ + struct ca0132_spec *spec = codec->spec; + unsigned int tmp; + int err; + + /* 2.0/4.0 setup has no LFE channel, so setting full-range does nothing. */ + if (spec->channel_cfg_val == SPEAKER_CHANNELS_4_0 + || spec->channel_cfg_val == SPEAKER_CHANNELS_2_0) + return 0; + + /* Set front L/R full range. Zero for full-range, one for redirection. */ + tmp = spec->speaker_range_val[0] ? FLOAT_ZERO : FLOAT_ONE; + err = dspio_set_uint_param(codec, 0x96, + SPEAKER_FULL_RANGE_FRONT_L_R, tmp); + if (err < 0) + return err; + + /* When setting full-range rear, both rear and center/lfe are set. */ + tmp = spec->speaker_range_val[1] ? FLOAT_ZERO : FLOAT_ONE; + err = dspio_set_uint_param(codec, 0x96, + SPEAKER_FULL_RANGE_CENTER_LFE, tmp); + if (err < 0) + return err; + + err = dspio_set_uint_param(codec, 0x96, + SPEAKER_FULL_RANGE_REAR_L_R, tmp); + if (err < 0) + return err; + + /* + * Only the AE series cards set this value when setting full-range, + * and it's always 1.0f. + */ + if (ca0132_quirk(spec) == QUIRK_AE5) { + err = dspio_set_uint_param(codec, 0x96, + SPEAKER_FULL_RANGE_SURROUND_L_R, FLOAT_ONE); + if (err < 0) + return err; + } + + return 0; +} + /* * These are the commands needed to setup output on each of the different card * types. @@ -4539,6 +4604,9 @@ static int ca0132_alt_select_out(struct hda_codec *codec) goto exit; }
+ if (spec->cur_out_type == SURROUND_OUT) + err = ca0132_alt_set_full_range_speaker(codec); + exit: snd_hda_power_down_pm(codec);
@@ -5269,6 +5337,7 @@ static int ca0132_alt_xbass_xover_slider_ctl_get(struct snd_kcontrol *kcontrol, long *valp = ucontrol->value.integer.value;
*valp = spec->xbass_xover_freq; + return 0; }
@@ -5894,6 +5963,11 @@ static int ca0132_switch_get(struct snd_kcontrol *kcontrol, return 0; }
+ if (nid == SPEAKER_FULL_RANGE_FRONT || nid == SPEAKER_FULL_RANGE_REAR) { + *valp = spec->speaker_range_val[nid - SPEAKER_FULL_RANGE_FRONT]; + return 0; + } + return 0; }
@@ -5972,6 +6046,14 @@ static int ca0132_switch_put(struct snd_kcontrol *kcontrol, goto exit; }
+ if (nid == SPEAKER_FULL_RANGE_FRONT || nid == SPEAKER_FULL_RANGE_REAR) { + spec->speaker_range_val[nid - SPEAKER_FULL_RANGE_FRONT] = *valp; + if (spec->cur_out_type == SURROUND_OUT) + ca0132_alt_set_full_range_speaker(codec); + + changed = 0; + } + exit: snd_hda_power_down(codec); return changed; @@ -6329,6 +6411,31 @@ static int ca0132_alt_add_speaker_channel_cfg_enum(struct hda_codec *codec) snd_ctl_new1(&knew, codec)); }
+/* + * Full range front stereo and rear surround switches. When these are set to + * full range, the lower frequencies from these channels are no longer + * redirected to the LFE channel. + */ +static int ca0132_alt_add_front_full_range_switch(struct hda_codec *codec) +{ + struct snd_kcontrol_new knew = + CA0132_CODEC_MUTE_MONO("Full-Range Front Speakers", + SPEAKER_FULL_RANGE_FRONT, 1, HDA_OUTPUT); + + return snd_hda_ctl_add(codec, SPEAKER_FULL_RANGE_FRONT, + snd_ctl_new1(&knew, codec)); +} + +static int ca0132_alt_add_rear_full_range_switch(struct hda_codec *codec) +{ + struct snd_kcontrol_new knew = + CA0132_CODEC_MUTE_MONO("Full-Range Rear Speakers", + SPEAKER_FULL_RANGE_REAR, 1, HDA_OUTPUT); + + return snd_hda_ctl_add(codec, SPEAKER_FULL_RANGE_REAR, + snd_ctl_new1(&knew, codec)); +} + /* * Create an Input Source enumerated control for the alternate ca0132 codecs * because the front microphone has no auto-detect, and Line-in has to be set @@ -6636,6 +6743,12 @@ static int ca0132_build_controls(struct hda_codec *codec) if (err < 0) return err; err = ca0132_alt_add_speaker_channel_cfg_enum(codec); + if (err < 0) + return err; + err = ca0132_alt_add_front_full_range_switch(codec); + if (err < 0) + return err; + err = ca0132_alt_add_rear_full_range_switch(codec); if (err < 0) return err; err = ca0132_alt_add_mic_boost_enum(codec); @@ -7982,6 +8095,10 @@ static void ca0132_init_chip(struct hda_codec *codec) * ca0132 codecs. Also sets x-bass crossover frequency to 80hz. */ if (ca0132_use_alt_controls(spec)) { + /* Set speakers to default to full range. */ + spec->speaker_range_val[0] = 1; + spec->speaker_range_val[1] = 1; + spec->xbass_xover_freq = 8; for (i = 0; i < EFFECT_LEVEL_SLIDERS; i++) spec->fx_ctl_val[i] = effect_slider_defaults[i];