From: Jeeja KP jeeja.kp@intel.com
If system is suspended when PCM was paused/stopped, restart doesn't configure DMA as it is we are in Pause state and results in IO error eventually.
Configure host/link DMA before initializing DSP Gateway copier module instead of DAI prepare(). So moved DMA configuration to mixer PRE_PMD widget handler instead of DAI prepare.
This uses previously added new API to do the configuration and removes old DAI prepare code.
Signed-off-by: Jeeja KP jeeja.kp@intel.com --- sound/soc/intel/skylake/skl-pcm.c | 50 +--------------------------------- sound/soc/intel/skylake/skl-topology.c | 19 +++++++++++++ 2 files changed, 20 insertions(+), 49 deletions(-)
diff --git a/sound/soc/intel/skylake/skl-pcm.c b/sound/soc/intel/skylake/skl-pcm.c index 8a7b6f7..1abff8e 100644 --- a/sound/soc/intel/skylake/skl-pcm.c +++ b/sound/soc/intel/skylake/skl-pcm.c @@ -305,37 +305,19 @@ static int skl_be_prepare(struct snd_pcm_substream *substream, static int skl_pcm_prepare(struct snd_pcm_substream *substream, struct snd_soc_dai *dai) { - struct hdac_ext_stream *stream = get_hdac_ext_stream(substream); struct skl *skl = get_skl_ctx(dai->dev); - unsigned int format_val; - int err; struct skl_module_cfg *mconfig;
dev_dbg(dai->dev, "%s: %s\n", __func__, dai->name);
mconfig = skl_tplg_fe_get_cpr_module(dai, substream->stream);
- format_val = skl_get_format(substream, dai); - dev_dbg(dai->dev, "stream_tag=%d formatvalue=%d\n", - hdac_stream(stream)->stream_tag, format_val); - snd_hdac_stream_reset(hdac_stream(stream)); - /* In case of XRUN recovery, reset the FW pipe to clean state */ if (mconfig && (substream->runtime->status->state == SNDRV_PCM_STATE_XRUN)) skl_reset_pipe(skl->skl_sst, mconfig->pipe);
- err = snd_hdac_stream_set_params(hdac_stream(stream), format_val); - if (err < 0) - return err; - - err = snd_hdac_stream_setup(hdac_stream(stream)); - if (err < 0) - return err; - - hdac_stream(stream)->prepared = 1; - - return err; + return 0; }
static int skl_pcm_hw_params(struct snd_pcm_substream *substream, @@ -510,7 +492,6 @@ static int skl_pcm_trigger(struct snd_pcm_substream *substream, int cmd, switch (cmd) { case SNDRV_PCM_TRIGGER_RESUME: if (!w->ignore_suspend) { - skl_pcm_prepare(substream, dai); /* * enable DMA Resume enable bit for the stream, set the * dpib & lpib position to resume before starting the @@ -531,7 +512,6 @@ static int skl_pcm_trigger(struct snd_pcm_substream *substream, int cmd, * pipeline is started but there is a delay in starting the * DMA channel on the host. */ - snd_hdac_ext_stream_decouple(ebus, stream, true); ret = skl_decoupled_trigger(substream, cmd); if (ret < 0) return ret; @@ -613,41 +593,15 @@ static int skl_link_hw_params(struct snd_pcm_substream *substream, static int skl_link_pcm_prepare(struct snd_pcm_substream *substream, struct snd_soc_dai *dai) { - struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream); - struct hdac_ext_bus *ebus = dev_get_drvdata(dai->dev); - struct hdac_ext_stream *link_dev = - snd_soc_dai_get_dma_data(dai, substream); - unsigned int format_val = 0; - struct skl_dma_params *dma_params; - struct snd_soc_dai *codec_dai = rtd->codec_dai; - struct hdac_ext_link *link; struct skl *skl = get_skl_ctx(dai->dev); struct skl_module_cfg *mconfig = NULL;
- dma_params = (struct skl_dma_params *) - snd_soc_dai_get_dma_data(codec_dai, substream); - if (dma_params) - format_val = dma_params->format; - dev_dbg(dai->dev, "stream_tag=%d formatvalue=%d codec_dai_name=%s\n", - hdac_stream(link_dev)->stream_tag, format_val, codec_dai->name); - - link = snd_hdac_ext_bus_get_link(ebus, rtd->codec->component.name); - if (!link) - return -EINVAL; - - snd_hdac_ext_link_stream_reset(link_dev); - /* In case of XRUN recovery, reset the FW pipe to clean state */ mconfig = skl_tplg_be_get_cpr_module(dai, substream->stream); if (mconfig && (substream->runtime->status->state == SNDRV_PCM_STATE_XRUN)) skl_reset_pipe(skl->skl_sst, mconfig->pipe);
- snd_hdac_ext_link_stream_setup(link_dev, format_val); - - snd_hdac_ext_link_set_stream_id(link, hdac_stream(link_dev)->stream_tag); - link_dev->link_prepared = 1; - return 0; }
@@ -662,10 +616,8 @@ static int skl_link_pcm_trigger(struct snd_pcm_substream *substream, dev_dbg(dai->dev, "In %s cmd=%d\n", __func__, cmd); switch (cmd) { case SNDRV_PCM_TRIGGER_RESUME: - skl_link_pcm_prepare(substream, dai); case SNDRV_PCM_TRIGGER_START: case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: - snd_hdac_ext_stream_decouple(ebus, stream, true); snd_hdac_ext_link_stream_start(link_dev); break;
diff --git a/sound/soc/intel/skylake/skl-topology.c b/sound/soc/intel/skylake/skl-topology.c index 484d451..9cf8c51 100644 --- a/sound/soc/intel/skylake/skl-topology.c +++ b/sound/soc/intel/skylake/skl-topology.c @@ -496,6 +496,20 @@ static int skl_tplg_set_module_init_data(struct snd_soc_dapm_widget *w) return 0; }
+static int skl_tplg_module_prepare(struct skl_sst *ctx, struct skl_pipe *pipe, + struct snd_soc_dapm_widget *w, struct skl_module_cfg *mcfg) +{ + switch (mcfg->dev_type) { + case SKL_DEVICE_HDAHOST: + return skl_pcm_host_dma_prepare(ctx->dev, pipe->p_params); + + case SKL_DEVICE_HDALINK: + return skl_pcm_link_dma_prepare(ctx->dev, pipe->p_params); + } + + return 0; +} + /* * Inside a pipe instance, we can have various modules. These modules need * to instantiated in DSP by invoking INIT_MODULE IPC, which is achieved by @@ -535,6 +549,11 @@ skl_tplg_init_pipe_modules(struct skl *skl, struct skl_pipe *pipe) mconfig->m_state = SKL_MODULE_LOADED; }
+ /* prepare the DMA if the module is gateway cpr */ + ret = skl_tplg_module_prepare(ctx, pipe, w, mconfig); + if (ret < 0) + return ret; + /* update blob if blob is null for be with default value */ skl_tplg_update_be_blob(w, ctx);