Designware I2S uses tx empty and rx available signals as the DMA handshaking signals. during music playing, if XRUN occurs, i2s_stop() function will be executed and both tx and rx irq are masked, when music contintes to be played, i2s_start() is executed but both tx and rx irq are not unmasked which cause I2S stop sending DMA handshaking signal to DMA controller, and it finally cause music playing will be stopped once XRUN occurs for the first time.
Signed-off-by: Yitian Bu yitian.bu@tangramtek.com --- sound/soc/dwc/designware_i2s.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/sound/soc/dwc/designware_i2s.c b/sound/soc/dwc/designware_i2s.c index a3e97b4..4d3e1d3 100644 --- a/sound/soc/dwc/designware_i2s.c +++ b/sound/soc/dwc/designware_i2s.c @@ -144,10 +144,19 @@ static void i2s_start(struct dw_i2s_dev *dev,
i2s_write_reg(dev->i2s_base, IER, 1);
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + for (i = 0; i < 4; i++) { + irq = i2s_read_reg(dev->i2s_base, IMR(i)); + i2s_write_reg(dev->i2s_base, IMR(i), irq & ~0x30); + } i2s_write_reg(dev->i2s_base, ITER, 1); - else + } else { + for (i = 0; i < 4; i++) { + irq = i2s_read_reg(dev->i2s_base, IMR(i)); + i2s_write_reg(dev->i2s_base, IMR(i), irq & ~0x03); + } i2s_write_reg(dev->i2s_base, IRER, 1); + }
i2s_write_reg(dev->i2s_base, CER, 1); }