The reset GPIO on the STA32X Codecs is used to reset the Codec and clear all registers. Also taking it down puts the IC in power save mode, so we put the device in reset mode when we go to sleep.
Signed-off-by: Thomas Niederprüm niederp@physik.uni-kl.de --- sound/soc/codecs/sta32x.c | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+)
diff --git a/sound/soc/codecs/sta32x.c b/sound/soc/codecs/sta32x.c index 03175fe..78f2009 100644 --- a/sound/soc/codecs/sta32x.c +++ b/sound/soc/codecs/sta32x.c @@ -26,6 +26,7 @@ #include <linux/i2c.h> #include <linux/regmap.h> #include <linux/regulator/consumer.h> +#include <linux/gpio/consumer.h> #include <linux/slab.h> #include <linux/workqueue.h> #include <sound/core.h> @@ -151,6 +152,7 @@ struct sta32x_priv { u32 coef_shadow[STA32X_COEF_COUNT]; struct delayed_work watchdog_work; int shutdown; + struct gpio_desc *gpiod_nreset; struct mutex coeff_lock; };
@@ -804,6 +806,16 @@ static int sta32x_hw_params(struct snd_pcm_substream *substream,
return 0; } + +static int sta32x_startup_sequence(struct sta32x_priv *sta32x) +{ + if (sta32x->gpiod_nreset) { + gpiod_set_value(sta32x->gpiod_nreset, 0); + mdelay(1); + gpiod_set_value(sta32x->gpiod_nreset, 1); + mdelay(1); + } + return 0; }
@@ -844,6 +856,7 @@ static int sta32x_set_bias_level(struct snd_soc_codec *codec, return ret; }
+ sta32x_startup_sequence(sta32x); sta32x_cache_sync(codec); sta32x_watchdog_start(sta32x); } @@ -861,6 +874,10 @@ static int sta32x_set_bias_level(struct snd_soc_codec *codec, STA32X_CONFF_PWDN | STA32X_CONFF_EAPD, 0); msleep(300); sta32x_watchdog_stop(sta32x); + + if (sta32x->gpiod_nreset) + gpiod_set_value(sta32x->gpiod_nreset, 0); + regulator_bulk_disable(ARRAY_SIZE(sta32x->supplies), sta32x->supplies); break; @@ -916,6 +933,11 @@ static int sta32x_probe(struct snd_soc_codec *codec) return ret; }
+ ret = sta32x_startup_sequence(sta32x); + if (ret < 0) { + dev_err(codec->dev, "Failed to startup device\n"); + return ret; + } /* set thermal warning adjustment and recovery */ if (!pdata->thermal_warning_recovery) thermal |= STA32X_CONFA_TWAB; @@ -1018,6 +1040,19 @@ static int sta32x_i2c_probe(struct i2c_client *i2c,
mutex_init(&sta32x->coeff_lock); sta32x->pdata = dev_get_platdata(dev); + + /* GPIOs */ + sta32x->gpiod_nreset = devm_gpiod_get(dev, "reset"); + if (IS_ERR(sta32x->gpiod_nreset)) { + ret = PTR_ERR(sta32x->gpiod_nreset); + if (ret != -ENOENT && ret != -ENOSYS) + return ret; + + sta32x->gpiod_nreset = NULL; + } else { + gpiod_direction_output(sta32x->gpiod_nreset, 0); + } + /* regulators */ for (i = 0; i < ARRAY_SIZE(sta32x->supplies); i++) sta32x->supplies[i].supply = sta32x_supply_names[i];