The current sample rate setup function for UAC1 assumes only the first endpoint retrieved from the interface:altset pair, but the rate set up may be needed also for the secondary endpoint. Also, retrieving the endpoint number from the interface descriptor is redundant; we have already the target endpoint in the given audioformat object.
This patch simplifies the code and corrects the target endpoint as described in the above. It simply refers to fmt->endpoint directly.
Also, this patch drops the pioneer_djm_set_format_quirk() that is caleld from snd_usb_set_format_quirk(); this function does the sample rate setup but for the capture endpoint (0x82), and that's exactly what the change above fixes.
Signed-off-by: Takashi Iwai tiwai@suse.de --- sound/usb/clock.c | 21 ++++++--------------- sound/usb/quirks.c | 28 ---------------------------- 2 files changed, 6 insertions(+), 43 deletions(-)
diff --git a/sound/usb/clock.c b/sound/usb/clock.c index 31051f2be46d..dc68ed65e478 100644 --- a/sound/usb/clock.c +++ b/sound/usb/clock.c @@ -485,18 +485,9 @@ static int set_sample_rate_v1(struct snd_usb_audio *chip, const struct audioformat *fmt, int rate) { struct usb_device *dev = chip->dev; - struct usb_host_interface *alts; - unsigned int ep; unsigned char data[3]; int err, crate;
- alts = snd_usb_get_host_interface(chip, fmt->iface, fmt->altsetting); - if (!alts) - return -EINVAL; - if (get_iface_desc(alts)->bNumEndpoints < 1) - return -EINVAL; - ep = get_endpoint(alts, 0)->bEndpointAddress; - /* if endpoint doesn't have sampling rate control, bail out */ if (!(fmt->attributes & UAC_EP_CS_ATTR_SAMPLE_RATE)) return 0; @@ -506,11 +497,11 @@ static int set_sample_rate_v1(struct snd_usb_audio *chip, data[2] = rate >> 16; err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), UAC_SET_CUR, USB_TYPE_CLASS | USB_RECIP_ENDPOINT | USB_DIR_OUT, - UAC_EP_CS_ATTR_SAMPLE_RATE << 8, ep, - data, sizeof(data)); + UAC_EP_CS_ATTR_SAMPLE_RATE << 8, + fmt->endpoint, data, sizeof(data)); if (err < 0) { dev_err(&dev->dev, "%d:%d: cannot set freq %d to ep %#x\n", - fmt->iface, fmt->altsetting, rate, ep); + fmt->iface, fmt->altsetting, rate, fmt->endpoint); return err; }
@@ -524,11 +515,11 @@ static int set_sample_rate_v1(struct snd_usb_audio *chip,
err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC_GET_CUR, USB_TYPE_CLASS | USB_RECIP_ENDPOINT | USB_DIR_IN, - UAC_EP_CS_ATTR_SAMPLE_RATE << 8, ep, - data, sizeof(data)); + UAC_EP_CS_ATTR_SAMPLE_RATE << 8, + fmt->endpoint, data, sizeof(data)); if (err < 0) { dev_err(&dev->dev, "%d:%d: cannot get freq at ep %#x\n", - fmt->iface, fmt->altsetting, ep); + fmt->iface, fmt->altsetting, fmt->endpoint); chip->sample_rate_read_error++; return 0; /* some devices don't support reading */ } diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 89e172642d98..e196e364cef1 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -1470,30 +1470,6 @@ static void set_format_emu_quirk(struct snd_usb_substream *subs, subs->pkt_offset_adj = (emu_samplerate_id >= EMU_QUIRK_SR_176400HZ) ? 4 : 0; }
- -/* - * Pioneer DJ DJM-900NXS2 - * Device needs to know the sample rate each time substream is started - */ -static int pioneer_djm_set_format_quirk(struct snd_usb_substream *subs) -{ - unsigned int cur_rate = subs->data_endpoint->cur_rate; - /* Convert sample rate value to little endian */ - u8 sr[3]; - - sr[0] = cur_rate & 0xff; - sr[1] = (cur_rate >> 8) & 0xff; - sr[2] = (cur_rate >> 16) & 0xff; - - /* Configure device */ - usb_set_interface(subs->dev, 0, 1); - snd_usb_ctl_msg(subs->stream->chip->dev, - usb_rcvctrlpipe(subs->stream->chip->dev, 0), - 0x01, 0x22, 0x0100, 0x0082, &sr, 0x0003); - - return 0; -} - void snd_usb_set_format_quirk(struct snd_usb_substream *subs, const struct audioformat *fmt) { @@ -1504,10 +1480,6 @@ void snd_usb_set_format_quirk(struct snd_usb_substream *subs, case USB_ID(0x041e, 0x3f19): /* E-Mu 0204 USB */ set_format_emu_quirk(subs, fmt); break; - case USB_ID(0x2b73, 0x000a): /* Pioneer DJ DJM-900NXS2 */ - case USB_ID(0x2b73, 0x0017): /* Pioneer DJ DJM-250MK2 */ - pioneer_djm_set_format_quirk(subs); - break; case USB_ID(0x534d, 0x2109): /* MacroSilicon MS2109 */ subs->stream_offset_adj = 2; break;