Hi.
I've tried this series applied against 3.11.6 in ubuntu with MS headset - seems to be working fine with Skype.
Thanks!
2013/10/6 Eldad Zack eldad@fogrefinery.com
Hi,
This patch series attempts to fix a long standing problem with the concurrent usage of playback and capture on implicit feedback devices.
Now the following work properly on my system:
Full-duplex with jack :)
All tests I ran with my tool. Will post it in case anyone want to try it, it takes about 15 minutes to run all the tests.
Starting a capture-only jackd instance, e.g.: jackd -n 1 -d alsa -d hw:2,0 -C and then playback-only: jackd -n 2 -d alsa -d hw:2,0 -P and then stop and start the playback. The same with playback running and restarting capture.
Trying to start a second substream with parameter mismatch (rate or period bytes is all I can test with my device) will fail, without ill effects.
With this series applied there are now 3 usage tracking variables:
- substream usage flag
- endpoint param_set (to protect the parameters until the endpoint is
started)
- the existing endpoint use_count
Changes from v3:
- Added substream "used" flag, to prevent failure in some combinations of
ops. (#13)
- Moved start_endpoints for capture to prepare (#14)
- Added more constraints to the endpoint_may_set_params function (#10)
- Cleanups (#12, #15)
v3:
http://mailman.alsa-project.org/pipermail/alsa-devel/2013-August/065744.html
Applies against for-next, tested on upstream 3.12-rc3 (needs Alan Stern's recent patch "improve buffer size computations for USB PCM audio" to apply cleanly on current mainline).
Daniel and Nikolay: if you can test again with this series I'd appreciate it.
Cheers, Eldad
Eldad Zack (15): ALSA: usb-audio: remove unused parameter from sync_ep_set_params ALSA: usb-audio: remove deactivate_endpoints() ALSA: usb-audio: prevent NULL dereference on stop trigger ALSA: usb-audio: don't deactivate URBs on in-use EP ALSA: usb-audio: void return type of snd_usb_endpoint_deactivate() ALSA: usb-audio: clear SUBSTREAM_FLAG_SYNC_EP_STARTED on error ALSA: usb-audio: correct ep use_count semantics (add set_param flag) ALSA: usb-audio: rename alt_idx to altsetting ALSA: usb-audio: conditional interface altsetting ALSA: usb-audio: conditional concurrent usage of endpoint ALSA: usb-audio: remove altset_idx from snd_usb_substream ALSA: usb-audio: remove unused endpoint flag EP_FLAG_ACTIVATED ALSA: usb-audio: clear sync subs hw_params ALSA: usb-audio: always wait in start_endpoints ALSA: usb-audio: improve logging messages
sound/usb/card.h | 9 ++- sound/usb/endpoint.c | 122 ++++++++++++++++++++--------- sound/usb/endpoint.h | 13 +++- sound/usb/pcm.c | 214 ++++++++++++++++++++++++++++++++++++--------------- sound/usb/pcm.h | 2 + sound/usb/proc.c | 4 +- 6 files changed, 258 insertions(+), 106 deletions(-)
-- 1.8.1.5