Hi Mark,
On Mon, Jul 11, 2022 at 02:23:59PM +0100, Mark Brown wrote:
On Mon, Jul 11, 2022 at 02:05:22PM +0100, Alexandru Elisei wrote:
Commit a5450aba737d ("ASoC: rockchip: i2s: switch BCLK to GPIO") switched BCLK to GPIO functions when probing the i2s bus interface, but missed adding a check for when devm_pinctrl_get() returns an error. This can lead to the following NULL pointer dereference on a rockpro64-v2 if there are no "pinctrl" properties in the i2s device tree node:
[ 0.658381] rockchip-i2s ff880000.i2s: failed to find i2s default state [ 0.658993] rockchip-i2s ff880000.i2s: failed to find i2s gpio state [ 0.660072] rockchip-i2s ff890000.i2s: failed to find i2s default state [ 0.660670] rockchip-i2s ff890000.i2s: failed to find i2s gpio state
Please think hard before including complete backtraces in upstream reports, they are very large and contain almost no useful information
I'm at a loss here. Are you saying that those 4 lines represent a complete backtrace and they are very large? Or are you talking about the panic log that I've included in the commit message?
relative to their size so often obscure the relevant content in your message. If part of the backtrace is usefully illustrative (it often is for search engines if nothing else) then it's usually better to pull out the relevant sections.
Would you mind pointing out what you think the relevant sections are? I would also find it very useful (for future patches) if you can explain why they are relevant, and why those parts you've left out aren't. It's not very easy to figure out what is relevant when you're not familiar with a subsystem.
Thanks, Alex