According to the AW88261 datasheet (V1.1) and device schematics I have access to, there is no reset gpio present on the AW88261. Remove it.
Signed-off-by: Luca Weiss luca.weiss@fairphone.com --- In case this looks okay, also to the driver author at Awinic, the binding doc also needs to be updated to include this change and not require (or even allow) the reset-gpios anymore.
Therefore this is marked RFC for now. --- sound/soc/codecs/aw88261.c | 15 --------------- 1 file changed, 15 deletions(-)
diff --git a/sound/soc/codecs/aw88261.c b/sound/soc/codecs/aw88261.c index 45eaf931a69c..e7683f70c2ef 100644 --- a/sound/soc/codecs/aw88261.c +++ b/sound/soc/codecs/aw88261.c @@ -10,7 +10,6 @@
#include <linux/i2c.h> #include <linux/firmware.h> -#include <linux/of_gpio.h> #include <linux/regmap.h> #include <sound/soc.h> #include "aw88261.h" @@ -1175,14 +1174,6 @@ static const struct snd_soc_component_driver soc_codec_dev_aw88261 = { .remove = aw88261_codec_remove, };
-static void aw88261_hw_reset(struct aw88261 *aw88261) -{ - gpiod_set_value_cansleep(aw88261->reset_gpio, 0); - usleep_range(AW88261_1000_US, AW88261_1000_US + 10); - gpiod_set_value_cansleep(aw88261->reset_gpio, 1); - usleep_range(AW88261_1000_US, AW88261_1000_US + 10); -} - static void aw88261_parse_channel_dt(struct aw88261 *aw88261) { struct aw_device *aw_dev = aw88261->aw_pa; @@ -1254,12 +1245,6 @@ static int aw88261_i2c_probe(struct i2c_client *i2c)
i2c_set_clientdata(i2c, aw88261);
- aw88261->reset_gpio = devm_gpiod_get_optional(&i2c->dev, "reset", GPIOD_OUT_LOW); - if (IS_ERR(aw88261->reset_gpio)) - dev_info(&i2c->dev, "reset gpio not defined\n"); - else - aw88261_hw_reset(aw88261); - aw88261->regmap = devm_regmap_init_i2c(i2c, &aw88261_remap_config); if (IS_ERR(aw88261->regmap)) { ret = PTR_ERR(aw88261->regmap);
--- base-commit: b216fb8946f819cf1b63dc12c7867cc501bda57e change-id: 20230929-aw88261-reset-7e00d9e25952
Best regards,