This driver has unbalanced regulator_disable when doing module loading and unloading. This is because tpa6130a2_probe followed by tpa6130a2_remove calls twice tpa6130a2_power(0). Fix this by implementing a state checking in tpa6130a2_power.
Signed-off-by: Jarkko Nikula jhnikula@gmail.com Cc: Peter Ujfalusi peter.ujfalusi@nokia.com --- sound/soc/codecs/tpa6130a2.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/tpa6130a2.c b/sound/soc/codecs/tpa6130a2.c index 329acc1..83b5631 100644 --- a/sound/soc/codecs/tpa6130a2.c +++ b/sound/soc/codecs/tpa6130a2.c @@ -125,7 +125,7 @@ static int tpa6130a2_power(int power) data = i2c_get_clientdata(tpa6130a2_client);
mutex_lock(&data->mutex); - if (power) { + if (power && !data->power_state) { /* Power on */ if (data->power_gpio >= 0) gpio_set_value(data->power_gpio, 1); @@ -153,7 +153,7 @@ static int tpa6130a2_power(int power) val = tpa6130a2_read(TPA6130A2_REG_CONTROL); val &= ~TPA6130A2_SWS; tpa6130a2_i2c_write(TPA6130A2_REG_CONTROL, val); - } else { + } else if (!power && data->power_state) { /* set SWS */ val = tpa6130a2_read(TPA6130A2_REG_CONTROL); val |= TPA6130A2_SWS;