Based on the format of the stream the omap-pcm can decide alone what data type should be used with by the sDMA. Keep the possibility for OMAP dai drivers to tell omap-pcm if they want to use different data type. This is needed for the omap-hdmi for example which needs 32bit data type even if the stream format is S16_LE.
The check if (dma_data->data_type) is safe at the moment since omap-pcm does not support 8bit samples (OMAP_DMA_DATA_TYPE_S8 == 0x00).
The next step is to redefine the meaning of dma_data->data_type to unblock this limitation.
Signed-off-by: Peter Ujfalusi peter.ujfalusi@ti.com --- sound/soc/omap/omap-pcm.c | 31 +++++++++++++++++++++++++++++-- 1 file changed, 29 insertions(+), 2 deletions(-)
diff --git a/sound/soc/omap/omap-pcm.c b/sound/soc/omap/omap-pcm.c index 02eeb2e..4c13a5f 100644 --- a/sound/soc/omap/omap-pcm.c +++ b/sound/soc/omap/omap-pcm.c @@ -149,6 +149,24 @@ static int omap_pcm_hw_free(struct snd_pcm_substream *substream) return 0; }
+static int omap_pcm_get_dma_type(int num_bits) +{ + int data_type; + + switch (num_bits) { + case 16: + data_type = OMAP_DMA_DATA_TYPE_S16; + break; + case 32: + data_type = OMAP_DMA_DATA_TYPE_S32; + break; + default: + data_type = -EINVAL; + break; + } + return data_type; +} + static int omap_pcm_prepare(struct snd_pcm_substream *substream) { struct snd_pcm_runtime *runtime = substream->runtime; @@ -163,7 +181,16 @@ static int omap_pcm_prepare(struct snd_pcm_substream *substream) return 0;
memset(&dma_params, 0, sizeof(dma_params)); - dma_params.data_type = dma_data->data_type; + + if (dma_data->data_type) + dma_params.data_type = dma_data->data_type; + else + dma_params.data_type = omap_pcm_get_dma_type( + snd_pcm_format_physical_width(runtime->format)); + + if (dma_params.data_type < 0) + return dma_params.data_type; + dma_params.trigger = dma_data->dma_req;
if (dma_data->packet_size) @@ -195,7 +222,7 @@ static int omap_pcm_prepare(struct snd_pcm_substream *substream) * still can get an interrupt at each period bounary */ bytes = snd_pcm_lib_period_bytes(substream); - dma_params.elem_count = bytes >> dma_data->data_type; + dma_params.elem_count = bytes >> dma_params.data_type; dma_params.frame_count = runtime->periods; omap_set_dma_params(prtd->dma_ch, &dma_params);