The Axentia Nattis is a device designed for presenting departures for public transport systems. The Natte helper board provides power and features a battery of battery chargers.
Signed-off-by: Peter Rosin peda@axentia.se --- Documentation/devicetree/bindings/arm/axentia.txt | 9 + MAINTAINERS | 2 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/at91-natte.dtsi | 245 ++++++++++++++++++++ arch/arm/boot/dts/at91-nattis-2-natte-2.dts | 258 ++++++++++++++++++++++ 5 files changed, 515 insertions(+) create mode 100644 arch/arm/boot/dts/at91-natte.dtsi create mode 100644 arch/arm/boot/dts/at91-nattis-2-natte-2.dts
diff --git a/Documentation/devicetree/bindings/arm/axentia.txt b/Documentation/devicetree/bindings/arm/axentia.txt index ea3fb96ae465..de58f2463880 100644 --- a/Documentation/devicetree/bindings/arm/axentia.txt +++ b/Documentation/devicetree/bindings/arm/axentia.txt @@ -10,6 +10,15 @@ compatible = "axentia,linea", and following the rules from atmel-at91.txt for a sama5d31 SoC.
+Nattis v2 board with Natte v2 power board +----------------------------------------- + +Required root node properties: +compatible = "axentia,nattis-2", "axentia,natte-2", "axentia,linea", + "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; +and following the rules from above for the axentia,linea CPU module. + + TSE-850 v3 board ----------------
diff --git a/MAINTAINERS b/MAINTAINERS index 2811a211632c..303d04502b8f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2488,6 +2488,8 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained F: Documentation/devicetree/bindings/arm/axentia.txt F: arch/arm/boot/dts/at91-linea.dtsi +F: arch/arm/boot/dts/at91-natte.dtsi +F: arch/arm/boot/dts/at91-nattis-2-natte-2.dts F: arch/arm/boot/dts/at91-tse850-3.dts
AXENTIA ASOC DRIVERS diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index eff87a344566..0c10d89adbc8 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -47,6 +47,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \ at91sam9x35ek.dtb dtb-$(CONFIG_SOC_SAM_V7) += \ at91-kizbox2.dtb \ + at91-nattis-2-natte-2.dtb \ at91-sama5d27_som1_ek.dtb \ at91-sama5d2_xplained.dtb \ at91-sama5d3_xplained.dtb \ diff --git a/arch/arm/boot/dts/at91-natte.dtsi b/arch/arm/boot/dts/at91-natte.dtsi new file mode 100644 index 000000000000..53b7bb9098f4 --- /dev/null +++ b/arch/arm/boot/dts/at91-natte.dtsi @@ -0,0 +1,245 @@ +/* + * at91-natte.dts - Device Tree include file for the Natte board + * + * Copyright (C) 2017 Axentia Technologies AB + * + * Author: Peter Rosin peda@axentia.se + * + * Licensed under GPLv2 or later. + */ + +/ { + mux: mux-controller { + compatible = "gpio-mux"; + #mux-control-cells = <0>; + + mux-gpios = <&ioexp 0 GPIO_ACTIVE_HIGH>, + <&ioexp 1 GPIO_ACTIVE_HIGH>, + <&ioexp 2 GPIO_ACTIVE_HIGH>; + }; + + batntc-mux { + compatible = "io-channel-mux"; + io-channels = <&adc 5>; + io-channel-names = "parent"; + mux-controls = <&mux>; + + channels = + "batntc0", "batntc1", "batntc2", "batntc3", + "batntc4", "batntc5", "batntc6", "batntc7"; + }; + + batv-mux { + compatible = "io-channel-mux"; + io-channels = <&adc 6>; + io-channel-names = "parent"; + mux-controls = <&mux>; + + channels = + "batv0", "batv1", "batv2", "batv3", + "batv4", "batv5", "batv6", "batv7"; + }; + + iout-mux { + compatible = "io-channel-mux"; + io-channels = <&adc 7>; + io-channel-names = "parent"; + mux-controls = <&mux>; + + channels = + "iout0", "iout1", "iout2", "iout3", + "iout4", "iout5", "iout6", "iout7"; + }; + + i2c-mux { + compatible = "i2c-mux"; + mux-locked; + i2c-parent = <&i2c0>; + mux-controls = <&mux>; + + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + bq24735-charger@9 { + compatible = "ti,bq24735"; + reg = <0x9>; + + ti,charge-current = <2000>; + ti,charge-voltage = <16800>; + + poll-interval = <20000>; + }; + }; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + bq24735-charger@9 { + compatible = "ti,bq24735"; + reg = <0x9>; + + ti,charge-current = <2000>; + ti,charge-voltage = <16800>; + + poll-interval = <20000>; + }; + }; + + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + bq24735-charger@9 { + compatible = "ti,bq24735"; + reg = <0x9>; + + ti,charge-current = <2000>; + ti,charge-voltage = <16800>; + + poll-interval = <20000>; + }; + }; + + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + bq24735-charger@9 { + compatible = "ti,bq24735"; + reg = <0x9>; + + ti,charge-current = <2000>; + ti,charge-voltage = <16800>; + + poll-interval = <20000>; + }; + }; + + i2c@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + + bq24735-charger@9 { + compatible = "ti,bq24735"; + reg = <0x9>; + + ti,charge-current = <2000>; + ti,charge-voltage = <16800>; + + poll-interval = <20000>; + }; + }; + + i2c@5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + + bq24735-charger@9 { + compatible = "ti,bq24735"; + reg = <0x9>; + + ti,charge-current = <2000>; + ti,charge-voltage = <16800>; + + poll-interval = <20000>; + }; + }; + + i2c@6 { + reg = <6>; + #address-cells = <1>; + #size-cells = <0>; + + bq24735-charger@9 { + compatible = "ti,bq24735"; + reg = <0x9>; + + ti,charge-current = <2000>; + ti,charge-voltage = <16800>; + + poll-interval = <20000>; + }; + }; + + i2c@7 { + reg = <7>; + #address-cells = <1>; + #size-cells = <0>; + + bq24735-charger@9 { + compatible = "ti,bq24735"; + reg = <0x9>; + + ti,charge-current = <2000>; + ti,charge-voltage = <16800>; + + poll-interval = <20000>; + }; + }; + }; +}; + +&i2c0 { + status = "okay"; + + ioexp: sx1502q@20 { + #gpio-cells = <2>; + compatible = "semtech,sx1502q"; + reg = <0x20>; + + gpio-controller; + ngpios = <8>; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio3_cfg_pins>; + + gpio3_cfg_pins: gpio3_cfg { + pins = "gpio3"; + bias-pull-up; + }; + }; + + adc: ads1015@48 { + compatible = "ti,ads1015"; + reg = <0x48>; + #io-channel-cells = <1>; + + #address-cells = <1>; + #size-cells = <0>; + + channel@4 { + reg = <4>; + ti,gain = <2>; + ti,datarate = <4>; + }; + + channel@5 { + reg = <5>; + ti,gain = <2>; + ti,datarate = <4>; + }; + + channel@6 { + reg = <6>; + ti,gain = <1>; + ti,datarate = <4>; + }; + + channel@7 { + reg = <7>; + ti,gain = <3>; + ti,datarate = <4>; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts new file mode 100644 index 000000000000..c7224cbb50b4 --- /dev/null +++ b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts @@ -0,0 +1,258 @@ +/* + * at91-nattis-2-natte-2.dts - Device Tree file for the Linea/Nattis board + * + * Copyright (C) 2017 Axentia Technologies AB + * + * Author: Peter Rosin peda@axentia.se + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +#include "at91-linea.dtsi" +#include "sama5d3_lcd.dtsi" +#include "at91-natte.dtsi" + +/ { + model = "Axentia Linea-Nattis v2 Natte v2"; + compatible = "axentia,nattis-2", "axentia,natte-2", "axentia,linea", + "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; + + ahb { + apb { + pinctrl@fffff200 { + nattis { + pinctrl_usba_vbus: usba_vbus { + atmel,pins = + <AT91_PIOD 28 + AT91_PERIPH_GPIO + AT91_PINCTRL_DEGLITCH>; + }; + + pinctrl_mmc0_cd: mmc0_cd { + atmel,pins = + <AT91_PIOD 5 + AT91_PERIPH_GPIO + AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; + + pinctrl_lcd_prlud0: lcd_prlud0 { + atmel,pins = + <AT91_PIOA 21 + AT91_PERIPH_GPIO + AT91_PINCTRL_OUTPUT_VAL(0)>; + }; + + pinctrl_lcd_hipow0: lcd_hipow0 { + atmel,pins = + <AT91_PIOA 23 + AT91_PERIPH_GPIO + AT91_PINCTRL_OUTPUT_VAL(0)>; + }; + }; + }; + + watchdog@fffffe40 { + status = "okay"; + }; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + wakeup { + label = "Wakeup"; + linux,code = <10>; + gpio-key,wakeup; + gpios = <&pioB 27 GPIO_ACTIVE_LOW>; + }; + }; + + panel_reg: panel-regulator { + compatible = "regulator-fixed"; + regulator-name = "panel-VCC"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + bl_reg: backlight-regulator { + compatible = "regulator-fixed"; + regulator-name = "panel-VDD"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + panel_bl: backlight { + compatible = "pwm-backlight"; + pwms = <&hlcdc_pwm 0 100000 0>; + + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <40>; + + power-supply = <&bl_reg>; + enable-gpios = <&pioA 20 GPIO_ACTIVE_HIGH>; + }; + + panel: panel { + compatible = "sharp,lq150x1lg11"; + backlight = <&panel_bl>; + power-supply = <&panel_reg>; + + port { + panel_input: endpoint { + remote-endpoint = <&hlcdc_panel_output>; + }; + }; + }; + + sound { + compatible = "simple-audio-card"; + + simple-audio-card,name = "nattis-tfa9879"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&cpu_dai>; + simple-audio-card,frame-master = <&cpu_dai>; + simple-audio-card,widgets = "Line", "Line Out Jack"; + simple-audio-card,routing = "Line Out Jack", "LINEOUT"; + + cpu_dai: simple-audio-card,cpu { + sound-dai = <&ssc0>; + }; + + simple-audio-card,codec { + sound-dai = <&codec>; + }; + }; +}; + +&i2c0 { + status = "okay"; + + clock-frequency = <100000>; + + temp@18 { + compatible = "nxp,se97b", "jedec,jc-42.4-temp"; + reg = <0x18>; + smbus-timeout-disable; + }; + + eeprom@50 { + compatible = "nxp,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + + codec: codec@6c { + compatible = "nxp,tfa9879"; + reg = <0x6c>; + }; +}; + +&ssc0 { + status = "okay"; + + atmel,clk-from-rk-pin; + #sound-dai-cells = <0>; +}; + +&hlcdc { + status = "okay"; + + hlcdc-display-controller { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_base + &pinctrl_lcd_rgb565 + &pinctrl_lcd_prlud0 + &pinctrl_lcd_hipow0>; + + port@0 { + hlcdc_panel_output: endpoint { + remote-endpoint = <&panel_input>; + }; + }; + }; +}; + +&mmc0 { + status = "okay"; + + pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 + &pinctrl_mmc0_dat1_3 + &pinctrl_mmc0_cd>; + + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>; + }; +}; + +&usart0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart0>; + atmel,use-dma-rx; +}; + +&nand { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + bootloader@40000 { + label = "bootloader"; + reg = <0x40000 0x80000>; + }; + + bootloaderenv@c0000 { + label = "bootloader env"; + reg = <0xc0000 0xc0000>; + }; + + dtb@180000 { + label = "device tree"; + reg = <0x180000 0x80000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; + + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x0f800000>; + }; + }; +}; + +&dbgu { + status = "okay"; + + atmel,use-dma-rx; +}; + +&usb0 { + status = "okay"; + + atmel,vbus-gpio = <&pioD 28 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usba_vbus>; +};