7 Jan
2013
7 Jan
'13
12:06 p.m.
On Mon, Jan 07, 2013 at 11:31:51AM +0200, Igor Grinberg wrote:
On 01/06/13 21:13, Mike Dunn wrote:
+/* these enable a work-around for a hw bug in pxa27x during ac97 warm reset */ +#define GPIO113_AC97_nRESET_GPIO_HIGH MFP_CFG_OUT(GPIO113, AF0, DRIVE_HIGH) +#define GPIO95_AC97_nRESET_GPIO_HIGH MFP_CFG_OUT(GPIO95, AF0, DRIVE_HIGH)
Do we really need to change the LPM? Because DRIVE_* only affect LPM.
Also, be very careful about driving output pins to peripherals high during sleep modes, especially if the peripherals are powered down. If they are powered down, you will drain power through the output into the peripheral to the extent that you _can_ cause it to remain partially powered up.