Reorder the probe function to be able to move the second imx-specific block to the seperate imx probe function. The patch also removes some comments/variables/code that are not used anymore or could be simply replaced by other variables.
Signed-off-by: Markus Pargmann mpa@pengutronix.de --- sound/soc/fsl/fsl_ssi.c | 113 +++++++++++++++++++++++------------------------- 1 file changed, 53 insertions(+), 60 deletions(-)
diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c index 8072926..af1b82f 100644 --- a/sound/soc/fsl/fsl_ssi.c +++ b/sound/soc/fsl/fsl_ssi.c @@ -159,7 +159,6 @@ struct fsl_ssi_private { bool imx_ac97; bool use_dma; bool baudclk_locked; - bool irq_stats; bool offline_config; bool use_dual_fifo; u8 i2s_mode; @@ -991,7 +990,7 @@ static void make_lowercase(char *s) }
static int fsl_ssi_imx_probe(struct platform_device *pdev, - struct fsl_ssi_private *ssi_private) + struct fsl_ssi_private *ssi_private, void __iomem *iomem) { struct device_node *np = pdev->dev.of_node; u32 dmas[4]; @@ -1041,12 +1040,47 @@ static int fsl_ssi_imx_probe(struct platform_device *pdev, ssi_private->dma_params_rx.maxburst &= ~0x1; }
+ if (!ssi_private->use_dma) { + + /* + * Some boards use an incompatible codec. To get it + * working, we are using imx-fiq-pcm-audio, that + * can handle those codecs. DMA is not possible in this + * situation. + */ + + ssi_private->fiq_params.irq = ssi_private->irq; + ssi_private->fiq_params.base = iomem; + ssi_private->fiq_params.dma_params_rx = + &ssi_private->dma_params_rx; + ssi_private->fiq_params.dma_params_tx = + &ssi_private->dma_params_tx; + + ret = imx_pcm_fiq_init(pdev, &ssi_private->fiq_params); + if (ret) + goto error_pcm; + } else { + ret = imx_pcm_dma_init(pdev); + if (ret) + goto error_pcm; + } + return 0; + +error_pcm: + if (!IS_ERR(ssi_private->baudclk)) + clk_disable_unprepare(ssi_private->baudclk); + + clk_disable_unprepare(ssi_private->clk); + + return ret; }
static void fsl_ssi_imx_clean(struct platform_device *pdev, struct fsl_ssi_private *ssi_private) { + if (!ssi_private->use_dma) + imx_pcm_fiq_exit(pdev); if (!IS_ERR(ssi_private->baudclk)) clk_disable_unprepare(ssi_private->baudclk); clk_disable_unprepare(ssi_private->clk); @@ -1056,7 +1090,6 @@ static int fsl_ssi_probe(struct platform_device *pdev) { struct fsl_ssi_private *ssi_private; int ret = 0; - struct device_attribute *dev_attr = NULL; struct device_node *np = pdev->dev.of_node; const struct of_device_id *of_id; enum fsl_ssi_type hw_type; @@ -1149,6 +1182,8 @@ static int fsl_ssi_probe(struct platform_device *pdev) ssi_private->baudclk_locked = false; spin_lock_init(&ssi_private->baudclk_lock);
+ dev_set_drvdata(&pdev->dev, ssi_private); + /* * imx51 and later SoCs have a slightly different IP that allows the * SSI configuration while the SSI unit is running. @@ -1179,20 +1214,22 @@ static int fsl_ssi_probe(struct platform_device *pdev) hw_type == FSL_SSI_MX35) { ssi_private->ssi_on_imx = true;
- ret = fsl_ssi_imx_probe(pdev, ssi_private); + ret = fsl_ssi_imx_probe(pdev, ssi_private, ssi_private->ssi); if (ret) goto error_irqmap; }
- /* - * Enable interrupts only for MCP8610 and MX51. The other MXs have - * different writeable interrupt status registers. - */ + ret = snd_soc_register_component(&pdev->dev, &fsl_ssi_component, + &ssi_private->cpu_dai_drv, 1); + if (ret) { + dev_err(&pdev->dev, "failed to register DAI: %d\n", ret); + goto error_asoc_register; + } + if (ssi_private->use_dma) { ret = devm_request_irq(&pdev->dev, ssi_private->irq, fsl_ssi_isr, 0, ssi_private->name, ssi_private); - ssi_private->irq_stats = true; if (ret < 0) { dev_err(&pdev->dev, "could not claim irq %u\n", ssi_private->irq); @@ -1200,46 +1237,9 @@ static int fsl_ssi_probe(struct platform_device *pdev) } }
- /* Register with ASoC */ - dev_set_drvdata(&pdev->dev, ssi_private); - - ret = snd_soc_register_component(&pdev->dev, &fsl_ssi_component, - &ssi_private->cpu_dai_drv, 1); - if (ret) { - dev_err(&pdev->dev, "failed to register DAI: %d\n", ret); - goto error_dev; - } - ret = fsl_ssi_debugfs_create(&ssi_private->dbg_stats, &pdev->dev); if (ret) - goto error_dbgfs; - - if (ssi_private->ssi_on_imx) { - if (!ssi_private->use_dma) { - - /* - * Some boards use an incompatible codec. To get it - * working, we are using imx-fiq-pcm-audio, that - * can handle those codecs. DMA is not possible in this - * situation. - */ - - ssi_private->fiq_params.irq = ssi_private->irq; - ssi_private->fiq_params.base = ssi_private->ssi; - ssi_private->fiq_params.dma_params_rx = - &ssi_private->dma_params_rx; - ssi_private->fiq_params.dma_params_tx = - &ssi_private->dma_params_tx; - - ret = imx_pcm_fiq_init(pdev, &ssi_private->fiq_params); - if (ret) - goto error_pcm; - } else { - ret = imx_pcm_dma_init(pdev); - if (ret) - goto error_pcm; - } - } + goto error_asoc_register;
/* * If codec-handle property is missing from SSI node, we assume @@ -1269,32 +1269,25 @@ static int fsl_ssi_probe(struct platform_device *pdev) if (IS_ERR(ssi_private->pdev)) { ret = PTR_ERR(ssi_private->pdev); dev_err(&pdev->dev, "failed to register platform: %d\n", ret); - goto error_dai; + goto error_sound_card; }
done: return 0;
-error_dai: - if (ssi_private->ssi_on_imx && !ssi_private->use_dma) - imx_pcm_fiq_exit(pdev); - -error_pcm: +error_sound_card: fsl_ssi_debugfs_remove(&ssi_private->dbg_stats);
-error_dbgfs: +error_irq: snd_soc_unregister_component(&pdev->dev);
-error_dev: - device_remove_file(&pdev->dev, dev_attr); - -error_irq: +error_asoc_register: if (ssi_private->ssi_on_imx) { fsl_ssi_imx_clean(pdev, ssi_private); }
error_irqmap: - if (ssi_private->irq_stats) + if (ssi_private->use_dma) irq_dispose_mapping(ssi_private->irq);
return ret; @@ -1313,7 +1306,7 @@ static int fsl_ssi_remove(struct platform_device *pdev) if (ssi_private->ssi_on_imx) fsl_ssi_imx_clean(pdev, ssi_private);
- if (ssi_private->irq_stats) + if (ssi_private->use_dma) irq_dispose_mapping(ssi_private->irq);
return 0;