Hi List,
The Edirol M-16DX has been working out of the box with ALSA (using firmware v1.21), capable of recording 18 channels, until upgraded to firmware v2.0.
symptom: When connected via USB, the device's lcd displays "USB ON LINE" which never disappears. Sound still goes through the device but the interface (knobs, buttons) don't react any more. On the computer, the sound device gets listed, but it cannot be opened.
alsa-info: http://www.alsa-project.org/db/?f=d094a5abda1b562c6ba572e4dd9425aa30c8a42d
dmesg: [18641.439112] usb 2-4: new high-speed USB device number 5 using ehci-pci [18641.554781] usb 2-4: New USB device found, idVendor=0582, idProduct=00c4 [18641.554794] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [18641.554802] usb 2-4: Product: M-16DX [18641.554807] usb 2-4: Manufacturer: EDIROL [18647.744008] usb 2-4: 1:1: usb_set_interface failed (-110) [18652.743929] usb 2-4: 1:1: usb_set_interface failed (-110) [18657.744786] usb 2-4: 1:1: usb_set_interface failed (-110) [18662.745466] usb 2-4: 1:1: usb_set_interface failed (-110) [18667.745220] usb 2-4: 1:1: usb_set_interface failed (-110) [18672.746071] usb 2-4: 1:1: usb_set_interface failed (-110) [18677.747007] usb 2-4: 1:1: usb_set_interface failed (-110) [18682.747709] usb 2-4: 1:1: usb_set_interface failed (-110) [18687.748416] usb 2-4: 1:1: usb_set_interface failed (-110) [18692.748261] usb 2-4: 1:1: usb_set_interface failed (-110) [18697.749174] usb 2-4: 1:1: usb_set_interface failed (-110) [18702.749893] usb 2-4: 1:1: usb_set_interface failed (-110)
I'll be more than happy to provide more info and to test possible solutions. This is a wonderful device and it was working like a charm until the firmware change.
Please, if possible, cc your reply to my personal address too.
Thanks,
András