On 11/23/2023 3:14 AM, Shengjiu Wang wrote:
As the input phy clock frequency will divided by 2 by default on i.MX8MP with the implementation of clk-imx8mp-audiomix driver, So the requested frequency need to be updated.
The relation of phy clock is: sai_pll_ref_sel sai_pll sai_pll_bypass sai_pll_out sai_pll_out_div2 earc_phy_cg
Signed-off-by: Shengjiu Wang shengjiu.wang@nxp.com
Reviewed-by: Iuliana Prodan iuliana.prodan@nxp.com
Thanks, Iulia
sound/soc/fsl/fsl_xcvr.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/soc/fsl/fsl_xcvr.c b/sound/soc/fsl/fsl_xcvr.c index 77f8e2394bf9..f0fb33d719c2 100644 --- a/sound/soc/fsl/fsl_xcvr.c +++ b/sound/soc/fsl/fsl_xcvr.c @@ -358,7 +358,7 @@ static int fsl_xcvr_en_aud_pll(struct fsl_xcvr *xcvr, u32 freq) struct device *dev = &xcvr->pdev->dev; int ret;
- freq = xcvr->soc_data->spdif_only ? freq / 10 : freq;
- freq = xcvr->soc_data->spdif_only ? freq / 5 : freq; clk_disable_unprepare(xcvr->phy_clk); ret = clk_set_rate(xcvr->phy_clk, freq); if (ret < 0) {
@@ -409,7 +409,7 @@ static int fsl_xcvr_prepare(struct snd_pcm_substream *substream, bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK; u32 m_ctl = 0, v_ctl = 0; u32 r = substream->runtime->rate, ch = substream->runtime->channels;
- u32 fout = 32 * r * ch * 10 * 2;
u32 fout = 32 * r * ch * 10; int ret = 0;
switch (xcvr->mode) {