From: Mac Chiang mac.chiang@intel.com
amplifier feedback is not modeled as being dependent on any active output. Even when there is no playback happening, parts of the graph, specifically the IV sense->speaker protection->output remains active and this prevents the DSP from entering low-power states.
This patch suggest a machine driver level approach where the speaker pins are enabled/disabled dynamically depending on stream start/stop events. DPAM graph representations show the feedback loop is indeed disabled and low-power states can be reached.
Signed-off-by: Jenny TC jenny.tc@intel.com Signed-off-by: Harshapriya.n harshapriya.n@intel.com Signed-off-by: Mac Chiang mac.chiang@intel.com --- Changelog: v4: - Changed device name in in kabylake_ssp0_trigger to address a conflict with recently merged patch MAXIM_DEV0_NAME -> MAX98927_DEV0_NAME ... v3: - fixed the return logic at the end of kabylake_card_late_probe() v2: - described clearly in commit message - added snd_soc_dapm_disable_pin in kabylake_card_late_probe() --- --- sound/soc/intel/boards/kbl_da7219_max98927.c | 73 +++++++++++++++++++++++++++- 1 file changed, 71 insertions(+), 2 deletions(-)
diff --git a/sound/soc/intel/boards/kbl_da7219_max98927.c b/sound/soc/intel/boards/kbl_da7219_max98927.c index 2768a57..a04a6bb 100644 --- a/sound/soc/intel/boards/kbl_da7219_max98927.c +++ b/sound/soc/intel/boards/kbl_da7219_max98927.c @@ -219,8 +219,60 @@ static int kabylake_ssp0_hw_params(struct snd_pcm_substream *substream, return 0; }
+static int kabylake_ssp0_trigger(struct snd_pcm_substream *substream, int cmd) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + int j, ret; + + for (j = 0; j < rtd->num_codecs; j++) { + struct snd_soc_dai *codec_dai = rtd->codec_dais[j]; + const char *name = codec_dai->component->name; + struct snd_soc_component *component = codec_dai->component; + struct snd_soc_dapm_context *dapm = + snd_soc_component_get_dapm(component); + char pin_name[20]; + + if (strcmp(name, MAX98927_DEV0_NAME) && + strcmp(name, MAX98927_DEV1_NAME) && + strcmp(name, MAX98373_DEV0_NAME) && + strcmp(name, MAX98373_DEV1_NAME)) + continue; + + snprintf(pin_name, ARRAY_SIZE(pin_name), "%s Spk", + codec_dai->component->name_prefix); + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_RESUME: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + ret = snd_soc_dapm_enable_pin(dapm, pin_name); + if (ret) { + dev_err(rtd->dev, "failed to enable %s: %d\n", + pin_name, ret); + return ret; + } + snd_soc_dapm_sync(dapm); + break; + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_SUSPEND: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + ret = snd_soc_dapm_disable_pin(dapm, pin_name); + if (ret) { + dev_err(rtd->dev, "failed to disable %s: %d\n", + pin_name, ret); + return ret; + } + snd_soc_dapm_sync(dapm); + break; + } + } + + return 0; +} + static struct snd_soc_ops kabylake_ssp0_ops = { .hw_params = kabylake_ssp0_hw_params, + .trigger = kabylake_ssp0_trigger, };
static int kabylake_ssp_fixup(struct snd_soc_pcm_runtime *rtd, @@ -956,6 +1008,7 @@ static int kabylake_card_late_probe(struct snd_soc_card *card) { struct kbl_codec_private *ctx = snd_soc_card_get_drvdata(card); struct kbl_hdmi_pcm *pcm; + struct snd_soc_dapm_context *dapm = &card->dapm; struct snd_soc_component *component = NULL; int err, i = 0; char jack_name[NAME_SIZE]; @@ -982,9 +1035,25 @@ static int kabylake_card_late_probe(struct snd_soc_card *card) if (!component) return -EINVAL;
- return hdac_hdmi_jack_port_init(component, &card->dapm);
- return 0; + err = hdac_hdmi_jack_port_init(component, &card->dapm); + + if (err < 0) + return err; + + err = snd_soc_dapm_disable_pin(dapm, "Left Spk"); + if (err) { + dev_err(card->dev, "failed to disable Left Spk: %d\n", err); + return err; + } + + err = snd_soc_dapm_disable_pin(dapm, "Right Spk"); + if (err) { + dev_err(card->dev, "failed to disable Right Spk: %d\n", err); + return err; + } + + return snd_soc_dapm_sync(dapm); }
/* kabylake audio machine driver for SPT + DA7219 */