Documentation/sound/oss/PSS:1: ERROR: trailing whitespace Documentation/sound/oss/PSS:2: ERROR: trailing whitespace Documentation/sound/oss/PSS:3: ERROR: trailing whitespace Documentation/sound/oss/PSS:4: ERROR: trailing whitespace Documentation/sound/oss/PSS:17: ERROR: trailing whitespace Documentation/sound/oss/PSS:21: ERROR: trailing whitespace Documentation/sound/oss/PSS:31: ERROR: trailing whitespace Documentation/sound/oss/PSS:34: ERROR: trailing whitespace
Signed-off-by: Andrea Gelmini andrea.gelmini@gelma.net --- Documentation/sound/oss/PSS | 16 ++++++++-------- 1 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/Documentation/sound/oss/PSS b/Documentation/sound/oss/PSS index 187b952..f173ecf 100644 --- a/Documentation/sound/oss/PSS +++ b/Documentation/sound/oss/PSS @@ -1,7 +1,7 @@ -The PSS cards and other ECHO based cards provide an onboard DSP with -downloadable programs and also has an AD1848 "Microsoft Sound System" -device. The PSS driver enables MSS and MPU401 modes of the card. SB -is not enabled since it doesn't work concurrently with MSS. +The PSS cards and other ECHO based cards provide an onboard DSP with +downloadable programs and also has an AD1848 "Microsoft Sound System" +device. The PSS driver enables MSS and MPU401 modes of the card. SB +is not enabled since it doesn't work concurrently with MSS.
If you build this driver as a module then the driver takes the following parameters @@ -14,11 +14,11 @@ mss_io The base address of the Microsoft Sound System interface.
mss_irq The interrupt assigned to the Microsoft Sound System emulation. IRQ's 3,5,7,9,10,11 and 12 are available. If you - get IRQ errors be sure to check the interrupt is set to + get IRQ errors be sure to check the interrupt is set to "ISA/Legacy" in the BIOS on modern machines.
mss_dma The DMA channel used by the Microsoft Sound System. - This can be 0, 1, or 3. DMA 0 is not available on older + This can be 0, 1, or 3. DMA 0 is not available on older machines and will cause a crash on them.
mpu_io The MPU emulation base address. This sets the base of the @@ -28,10 +28,10 @@ mpu_irq The interrupt to use for the synthesizer. It must differ from the IRQ used by the Microsoft Sound System port.
-The mpu_io/mpu_irq fields are optional. If they are not specified the +The mpu_io/mpu_irq fields are optional. If they are not specified the synthesizer parts are not configured.
-When the module is loaded it looks for a file called +When the module is loaded it looks for a file called /etc/sound/pss_synth. This is the firmware file from the DOS install disks. This fil holds a general MIDI emulation. The file expected is called genmidi.ld on newer DOS driver install disks and synth.ld on older ones.