Unlike all designs supported sofar the Lenovo Yoga Tab 3 YT3-X90 does not have its internal microphone (intmic) on IN3L with the headset microphone on IN1L. Instead this tablet has the intmic on IN1L and the hsmic on IN2L.
Add a BYT_WM5102_IN_MAP quirk mechanism to allow selecting between different input maps and add support for both setups with the current settings being the default map.
The new INTMIC_IN1L_HSMIC_IN2L map is enabled by default on CHT because the Lenovo Yoga Tab 3 YT3-X90 model is the only Cherry Trail design currently supported. If different CHT designs turn up which need different input maps we can add DMI quirks to select a different map later.
The userspace UCM profile also needs to know about this so extend the components string with this info too.
Signed-off-by: Hans de Goede hdegoede@redhat.com --- sound/soc/intel/boards/bytcr_wm5102.c | 60 +++++++++++++++++++++++---- 1 file changed, 53 insertions(+), 7 deletions(-)
diff --git a/sound/soc/intel/boards/bytcr_wm5102.c b/sound/soc/intel/boards/bytcr_wm5102.c index d1664d7e6443..ee0a10256567 100644 --- a/sound/soc/intel/boards/bytcr_wm5102.c +++ b/sound/soc/intel/boards/bytcr_wm5102.c @@ -38,11 +38,16 @@ struct byt_wm5102_private { int mclk_freq; };
-/* Bits 0-3 are reserved for the input-map */ +#define BYT_WM5102_IN_MAP GENMASK(3, 0) #define BYT_WM5102_OUT_MAP GENMASK(7, 4) #define BYT_WM5102_SSP2 BIT(16) #define BYT_WM5102_MCLK_19_2MHZ BIT(17)
+enum { + BYT_WM5102_INTMIC_IN3L_HSMIC_IN1L, + BYT_WM5102_INTMIC_IN1L_HSMIC_IN2L, +}; + /* Note these values are pre-shifted for easy use of setting quirks */ enum { BYT_WM5102_SPK_SPK_MAP = FIELD_PREP_CONST(BYT_WM5102_OUT_MAP, 0), @@ -57,6 +62,20 @@ MODULE_PARM_DESC(quirk, "Board-specific quirk override");
static void log_quirks(struct device *dev) { + switch (quirk & BYT_WM5102_IN_MAP) { + case BYT_WM5102_INTMIC_IN3L_HSMIC_IN1L: + dev_info_once(dev, "quirk INTMIC_IN3L_HSMIC_IN1L enabled\n"); + break; + case BYT_WM5102_INTMIC_IN1L_HSMIC_IN2L: + dev_info_once(dev, "quirk INTMIC_IN1L_HSMIC_IN2L enabled\n"); + break; + default: + dev_warn_once(dev, "quirk sets invalid input map: 0x%lx, defaulting to INTMIC_IN3L_HSMIC_IN1L\n", + quirk & BYT_WM5102_IN_MAP); + quirk &= ~BYT_WM5102_IN_MAP; + quirk |= BYT_WM5102_INTMIC_IN3L_HSMIC_IN1L; + break; + } switch (quirk & BYT_WM5102_OUT_MAP) { case BYT_WM5102_SPK_SPK_MAP: dev_info_once(dev, "quirk SPK_SPK_MAP enabled\n"); @@ -191,16 +210,13 @@ static const struct snd_soc_dapm_route byt_wm5102_audio_map[] = { {"Headphone", NULL, "HPOUT1L"}, {"Headphone", NULL, "HPOUT1R"},
- {"Internal Mic", NULL, "MICBIAS3"}, - {"IN3L", NULL, "Internal Mic"}, - /* * The Headset Mix uses MICBIAS1 or 2 depending on if a CTIA/OMTP Headset * is connected, as the MICBIAS is applied after the CTIA/OMTP cross-switch. */ {"Headset Mic", NULL, "MICBIAS1"}, {"Headset Mic", NULL, "MICBIAS2"}, - {"IN1L", NULL, "Headset Mic"}, + {"Internal Mic", NULL, "MICBIAS3"}, };
static const struct snd_soc_dapm_route bytcr_wm5102_ssp0_map[] = { @@ -231,6 +247,16 @@ static const struct snd_soc_dapm_route byt_wm5102_spk_hpout2_map[] = { {"Speaker", NULL, "HPOUT2R"}, };
+static const struct snd_soc_dapm_route byt_wm5102_intmic_in3l_hsmic_in1l_map[] = { + {"IN3L", NULL, "Internal Mic"}, + {"IN1L", NULL, "Headset Mic"}, +}; + +static const struct snd_soc_dapm_route byt_wm5102_intmic_in1l_hsmic_in2l_map[] = { + {"IN1L", NULL, "Internal Mic"}, + {"IN2L", NULL, "Headset Mic"}, +}; + static const struct snd_kcontrol_new byt_wm5102_controls[] = { SOC_DAPM_PIN_SWITCH("Headphone"), SOC_DAPM_PIN_SWITCH("Headset Mic"), @@ -271,6 +297,20 @@ static int byt_wm5102_init(struct snd_soc_pcm_runtime *runtime) return ret; }
+ switch (quirk & BYT_WM5102_IN_MAP) { + case BYT_WM5102_INTMIC_IN3L_HSMIC_IN1L: + custom_map = byt_wm5102_intmic_in3l_hsmic_in1l_map; + num_routes = ARRAY_SIZE(byt_wm5102_intmic_in3l_hsmic_in1l_map); + break; + case BYT_WM5102_INTMIC_IN1L_HSMIC_IN2L: + custom_map = byt_wm5102_intmic_in1l_hsmic_in2l_map; + num_routes = ARRAY_SIZE(byt_wm5102_intmic_in1l_hsmic_in2l_map); + break; + } + ret = snd_soc_dapm_add_routes(&card->dapm, custom_map, num_routes); + if (ret) + return ret; + switch (quirk & BYT_WM5102_OUT_MAP) { case BYT_WM5102_SPK_SPK_MAP: custom_map = byt_wm5102_spk_spk_map; @@ -481,6 +521,8 @@ static char byt_wm5102_components[64]; /* = "cfg-spk:* cfg-int-mic:* cfg-hs-mic: static int snd_byt_wm5102_mc_probe(struct platform_device *pdev) { static const char * const out_map_name[] = { "spk", "hpout2" }; + static const char * const intmic_map_name[] = { "in3l", "in1l" }; + static const char * const hsmic_map_name[] = { "in1l", "in2l" }; char codec_name[SND_ACPI_I2C_ID_LEN]; struct device *dev = &pdev->dev; struct byt_wm5102_private *priv; @@ -541,9 +583,10 @@ static int snd_byt_wm5102_mc_probe(struct platform_device *pdev) /* * CHT always uses SSP2 and 19.2 MHz; and * the one currently supported CHT design uses HPOUT2 as - * speaker output. + * speaker output and has the intmic on IN1L + hsmic on IN2L. */ quirk = BYT_WM5102_SSP2 | BYT_WM5102_MCLK_19_2MHZ | + BYT_WM5102_INTMIC_IN1L_HSMIC_IN2L | BYT_WM5102_SPK_HPOUT2_MAP; } if (quirk_override != -1) { @@ -554,7 +597,10 @@ static int snd_byt_wm5102_mc_probe(struct platform_device *pdev) log_quirks(dev);
snprintf(byt_wm5102_components, sizeof(byt_wm5102_components), - "cfg-spk:%s", out_map_name[FIELD_GET(BYT_WM5102_OUT_MAP, quirk)]); + "cfg-spk:%s cfg-intmic:%s cfg-hsmic:%s", + out_map_name[FIELD_GET(BYT_WM5102_OUT_MAP, quirk)], + intmic_map_name[FIELD_GET(BYT_WM5102_IN_MAP, quirk)], + hsmic_map_name[FIELD_GET(BYT_WM5102_IN_MAP, quirk)]); byt_wm5102_card.components = byt_wm5102_components;
/* find index of codec dai */