A simple conversion from a plain text file. Put to designs subdirectory.
Signed-off-by: Takashi Iwai tiwai@suse.de --- Documentation/sound/alsa/ControlNames.txt | 107 ------------------- Documentation/sound/designs/control-names.rst | 142 ++++++++++++++++++++++++++ Documentation/sound/designs/index.rst | 1 + 3 files changed, 143 insertions(+), 107 deletions(-) delete mode 100644 Documentation/sound/alsa/ControlNames.txt create mode 100644 Documentation/sound/designs/control-names.rst
diff --git a/Documentation/sound/alsa/ControlNames.txt b/Documentation/sound/alsa/ControlNames.txt deleted file mode 100644 index 3fc1cf50d28e..000000000000 --- a/Documentation/sound/alsa/ControlNames.txt +++ /dev/null @@ -1,107 +0,0 @@ -This document describes standard names of mixer controls. - -Syntax: [LOCATION] SOURCE [CHANNEL] [DIRECTION] FUNCTION - -DIRECTION: - <nothing> (both directions) - Playback - Capture - Bypass Playback - Bypass Capture - -FUNCTION: - Switch (on/off switch) - Volume - Route (route control, hardware specific) - -CHANNEL: - <nothing> (channel independent, or applies to all channels) - Front - Surround (rear left/right in 4.0/5.1 surround) - CLFE - Center - LFE - Side (side left/right for 7.1 surround) - -LOCATION: (physical location of source) - Front - Rear - Dock (docking station) - Internal - -SOURCE: - Master - Master Mono - Hardware Master - Speaker (internal speaker) - Bass Speaker (internal LFE speaker) - Headphone - Line Out - Beep (beep generator) - Phone - Phone Input - Phone Output - Synth - FM - Mic - Headset Mic (mic part of combined headset jack - 4-pin headphone + mic) - Headphone Mic (mic part of either/or - 3-pin headphone or mic) - Line (input only, use "Line Out" for output) - CD - Video - Zoom Video - Aux - PCM - PCM Pan - Loopback - Analog Loopback (D/A -> A/D loopback) - Digital Loopback (playback -> capture loopback - without analog path) - Mono - Mono Output - Multi - ADC - Wave - Music - I2S - IEC958 - HDMI - SPDIF (output only) - SPDIF In - Digital In - HDMI/DP (either HDMI or DisplayPort) - -Exceptions (deprecated): - [Analogue|Digital] Capture Source - [Analogue|Digital] Capture Switch (aka input gain switch) - [Analogue|Digital] Capture Volume (aka input gain volume) - [Analogue|Digital] Playback Switch (aka output gain switch) - [Analogue|Digital] Playback Volume (aka output gain volume) - Tone Control - Switch - Tone Control - Bass - Tone Control - Treble - 3D Control - Switch - 3D Control - Center - 3D Control - Depth - 3D Control - Wide - 3D Control - Space - 3D Control - Level - Mic Boost [(?dB)] - -PCM interface: - - Sample Clock Source { "Word", "Internal", "AutoSync" } - Clock Sync Status { "Lock", "Sync", "No Lock" } - External Rate /* external capture rate */ - Capture Rate /* capture rate taken from external source */ - -IEC958 (S/PDIF) interface: - - IEC958 [...] [Playback|Capture] Switch /* turn on/off the IEC958 interface */ - IEC958 [...] [Playback|Capture] Volume /* digital volume control */ - IEC958 [...] [Playback|Capture] Default /* default or global value - read/write */ - IEC958 [...] [Playback|Capture] Mask /* consumer and professional mask */ - IEC958 [...] [Playback|Capture] Con Mask /* consumer mask */ - IEC958 [...] [Playback|Capture] Pro Mask /* professional mask */ - IEC958 [...] [Playback|Capture] PCM Stream /* the settings assigned to a PCM stream */ - IEC958 Q-subcode [Playback|Capture] Default /* Q-subcode bits */ - IEC958 Preamble [Playback|Capture] Default /* burst preamble words (4*16bits) */ diff --git a/Documentation/sound/designs/control-names.rst b/Documentation/sound/designs/control-names.rst new file mode 100644 index 000000000000..7fedd0f33cd9 --- /dev/null +++ b/Documentation/sound/designs/control-names.rst @@ -0,0 +1,142 @@ +=========================== +Standard ALSA Control Names +=========================== + +This document describes standard names of mixer controls. + +Standard Syntax +--------------- +Syntax: [LOCATION] SOURCE [CHANNEL] [DIRECTION] FUNCTION + + +DIRECTION +~~~~~~~~~ +================ =============== +<nothing> both directions +Playback one direction +Capture one direction +Bypass Playback one direction +Bypass Capture one direction +================ =============== + +FUNCTION +~~~~~~~~ +======== ================================= +Switch on/off switch +Volume amplifier +Route route control, hardware specific +======== ================================= + +CHANNEL +~~~~~~~ +============ ================================================== +<nothing> channel independent, or applies to all channels +Front front left/right channels +Surround rear left/right in 4.0/5.1 surround +CLFE C/LFE channels +Center center cannel +LFE LFE channel +Side side left/right for 7.1 surround +============ ================================================== + +LOCATION (Physical location of source) +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +============ ===================== +Front front position +Rear rear position +Dock on docking station +Internal internal +============ ===================== + +SOURCE +~~~~~~ +=================== ================================================= +Master +Master Mono +Hardware Master +Speaker internal speaker +Bass Speaker internal LFE speaker +Headphone +Line Out +Beep beep generator +Phone +Phone Input +Phone Output +Synth +FM +Mic +Headset Mic mic part of combined headset jack - 4-pin + headphone + mic +Headphone Mic mic part of either/or - 3-pin headphone or mic +Line input only, use "Line Out" for output +CD +Video +Zoom Video +Aux +PCM +PCM Pan +Loopback +Analog Loopback D/A -> A/D loopback +Digital Loopback playback -> capture loopback - + without analog path +Mono +Mono Output +Multi +ADC +Wave +Music +I2S +IEC958 +HDMI +SPDIF output only +SPDIF In +Digital In +HDMI/DP either HDMI or DisplayPort +=================== ================================================= + +Exceptions (deprecated) +----------------------- + +===================================== ======================= +[Analogue|Digital] Capture Source +[Analogue|Digital] Capture Switch aka input gain switch +[Analogue|Digital] Capture Volume aka input gain volume +[Analogue|Digital] Playback Switch aka output gain switch +[Analogue|Digital] Playback Volume aka output gain volume +Tone Control - Switch +Tone Control - Bass +Tone Control - Treble +3D Control - Switch +3D Control - Center +3D Control - Depth +3D Control - Wide +3D Control - Space +3D Control - Level +Mic Boost [(?dB)] +===================================== ======================= + +PCM interface +------------- + +=================== ======================================== +Sample Clock Source { "Word", "Internal", "AutoSync" } +Clock Sync Status { "Lock", "Sync", "No Lock" } +External Rate external capture rate +Capture Rate capture rate taken from external source +=================== ======================================== + +IEC958 (S/PDIF) interface +------------------------- + +============================================ ====================================== +IEC958 [...] [Playback|Capture] Switch turn on/off the IEC958 interface +IEC958 [...] [Playback|Capture] Volume digital volume control +IEC958 [...] [Playback|Capture] Default default or global value - read/write +IEC958 [...] [Playback|Capture] Mask consumer and professional mask +IEC958 [...] [Playback|Capture] Con Mask consumer mask +IEC958 [...] [Playback|Capture] Pro Mask professional mask +IEC958 [...] [Playback|Capture] PCM Stream the settings assigned to a PCM stream +IEC958 Q-subcode [Playback|Capture] Default Q-subcode bits + +IEC958 Preamble [Playback|Capture] Default burst preamble words (4*16bits) +============================================ ====================================== diff --git a/Documentation/sound/designs/index.rst b/Documentation/sound/designs/index.rst index 0ca3a6b0a5ce..e53a5fac0acf 100644 --- a/Documentation/sound/designs/index.rst +++ b/Documentation/sound/designs/index.rst @@ -4,6 +4,7 @@ Designs and Implementations .. toctree:: :maxdepth: 2
+ control-names channel-mapping-api procfile powersave