At Tue, 19 Feb 2008 16:03:18 +0100, Daniele (Mastro) wrote:
Takashi Iwai ha scritto:
The fix is basically the widget connection of NID 0x23 (and 0x24). This was uninitialized and thus pointed the wrong widget. Unfortunately, this connection couldn't be changed because you apparently have only one input source. The patch fixes this issue.
tried the new patch (i've compiled a today snapshot and then manually downloaded the last patch_realtek.c version)
the "front mic" capture now works.. i've 2 control: front mic and mic.. only mic works but i've a lot of crappy noise... http://www.mediafire.com/?c1c1jly9n7e
download this little .wav file i recorded with:
arecord -vv -f S16_LE -c1 -r48000 -d 5 test.wav
NOTE: while recording i see the "bar" always at 99%
thanks for your support.. do you have any idea on what's the cause of that noise?
The mixer setting? You should set "Digital Capture Volume" 50%, corresponding to 0dB. The capture volume doesn't have to be too high, too.
The vref level could be a different one depending on the mic device you are using. But VREF80 is OK in most cases.
Takashi