On Sun, 17 May 2015, Dmitry Eremin-Solenikov wrote:
LoCoMo has some special handling for TFT screens attached to Collie and Poodle. Implement that as a separate driver.
Signed-off-by: Dmitry Eremin-Solenikov dbaryshkov@gmail.com
drivers/video/backlight/Kconfig | 10 ++ drivers/video/backlight/Makefile | 1 + drivers/video/backlight/locomo_lcd.c | 285 +++++++++++++++++++++++++++++++++++ 3 files changed, 296 insertions(+) create mode 100644 drivers/video/backlight/locomo_lcd.c
This looks like it should be part of patch 16.
How much of this file is the same as the one removed later in the set?
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig index 6c093e2..b2f995c 100644 --- a/drivers/video/backlight/Kconfig +++ b/drivers/video/backlight/Kconfig @@ -48,6 +48,16 @@ config LCD_LMS283GF05 SPI driver for Samsung LMS283GF05. This provides basic support for powering the LCD up/down through a sysfs interface.
+config LCD_LOCOMO
- tristate "Sharp LOCOMO LCD Driver"
- depends on MFD_LOCOMO
- select IIO
- help
If you have a Sharp Zaurus SL-5500 (Collie) or SL-5600 (Poodle) say y to
enable the LCD driver. The panel starts up in power
off state, so you need this driver in order to see any
output.
config LCD_LTV350QV tristate "Samsung LTV350QV LCD Panel" depends on SPI_MASTER diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile index 2de73d2..686cf1a 100644 --- a/drivers/video/backlight/Makefile +++ b/drivers/video/backlight/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_LCD_L4F00242T03) += l4f00242t03.o obj-$(CONFIG_LCD_LD9040) += ld9040.o obj-$(CONFIG_LCD_LMS283GF05) += lms283gf05.o obj-$(CONFIG_LCD_LMS501KF03) += lms501kf03.o +obj-$(CONFIG_LCD_LOCOMO) += locomo_lcd.o obj-$(CONFIG_LCD_LTV350QV) += ltv350qv.o obj-$(CONFIG_LCD_PLATFORM) += platform_lcd.o obj-$(CONFIG_LCD_S6E63M0) += s6e63m0.o diff --git a/drivers/video/backlight/locomo_lcd.c b/drivers/video/backlight/locomo_lcd.c new file mode 100644 index 0000000..dc316cb --- /dev/null +++ b/drivers/video/backlight/locomo_lcd.c @@ -0,0 +1,285 @@ +/*
- Backlight control code for Sharp Zaurus SL-5500
- Copyright 2005 John Lenz lenz@cs.wisc.edu
- Maintainer: Pavel Machek pavel@ucw.cz (unless John wants to :-)
- GPL v2
- This driver assumes single CPU. That's okay, because collie is
- slightly old hardware, and no one is going to retrofit second CPU to
- old PDA.
- */
+#include <linux/delay.h> +#include <linux/fb.h> +#include <linux/gpio/consumer.h> +#include <linux/iio/consumer.h> +#include <linux/lcd.h> +#include <linux/mfd/locomo.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/regmap.h>
+struct locomo_lcd {
- struct regmap *regmap;
- struct platform_device *dev;
- struct locomo_lcd_platform_data *data;
- int power;
- struct iio_channel *comadj;
- struct gpio_desc *vsha, *vshd, *vee, *mod;
+};
+static void locomo_lcd_on(struct locomo_lcd *lcd) +{
- gpiod_set_value(lcd->vsha, 1);
- usleep_range(2000, 3000);
- gpiod_set_value(lcd->vshd, 1);
- usleep_range(2000, 3000);
- iio_write_channel_raw(lcd->comadj, lcd->data->comadj);
- usleep_range(5000, 6000);
- gpiod_set_value(lcd->vee, 1);
- usleep_range(10000, 11000);
- /* TFTCRST | CPSOUT=0 | CPSEN */
- regmap_write(lcd->regmap, LOCOMO_TC, 0x01);
- /* Set CPSD */
- regmap_write(lcd->regmap, LOCOMO_CPSD, 6);
- /* TFTCRST | CPSOUT=0 | CPSEN */
- regmap_write(lcd->regmap, LOCOMO_TC, 0x04 | 0x01);
- usleep_range(10000, 11000);
- gpiod_set_value(lcd->mod, 1);
+}
+static void locomo_lcd_off(struct locomo_lcd *lcd) +{
- /* TFTCRST=1 | CPSOUT=1 | CPSEN = 0 */
- regmap_write(lcd->regmap, LOCOMO_TC, 0x06);
- usleep_range(1000, 2000);
- gpiod_set_value(lcd->vsha, 0);
- msleep(110);
- gpiod_set_value(lcd->vee, 0);
- msleep(700);
- iio_write_channel_raw(lcd->comadj, 0);
- usleep_range(5000, 6000);
- /* TFTCRST=0 | CPSOUT=0 | CPSEN = 0 */
- regmap_write(lcd->regmap, LOCOMO_TC, 0);
- gpiod_set_value(lcd->mod, 0);
- gpiod_set_value(lcd->vshd, 0);
+}
+static void locomo_lcd_program_adsync(struct locomo_lcd *lcd) +{
- regmap_write(lcd->regmap, LOCOMO_ASD,
6 + 8 + 320 + 30 - 10);
- regmap_update_bits(lcd->regmap, LOCOMO_ASD,
0x8000,
0x8000);
- regmap_write(lcd->regmap, LOCOMO_HSD,
6 + 8 + 320 + 30 - 10 - 128 + 4);
- regmap_update_bits(lcd->regmap, LOCOMO_HSD,
0x8000,
0x8000);
- regmap_write(lcd->regmap, LOCOMO_HSC, 128 / 8);
- /* XON */
- regmap_write(lcd->regmap, LOCOMO_TADC, 0x80);
- usleep_range(1000, 1100);
- /* CLK9MEN */
- regmap_update_bits(lcd->regmap, LOCOMO_TADC,
0x10,
0x10);
- usleep_range(100, 200);
+}
+static void locomo_lcd_disable_adsync(struct locomo_lcd *lcd) +{
- /* ADSTART */
- regmap_write(lcd->regmap, LOCOMO_ASD, 0x00);
- /* 18MHz clock off*/
- regmap_write(lcd->regmap, LOCOMO_TADC, 0x00);
+}
+int locomo_lcd_set_power(struct lcd_device *ldev, int power) +{
- struct locomo_lcd *lcd = lcd_get_data(ldev);
- dev_dbg(&ldev->dev, "LCD power %d (is %d)\n", power, lcd->power);
- if (!power && lcd->power)
locomo_lcd_on(lcd);
- if (power && !lcd->power)
locomo_lcd_off(lcd);
- lcd->power = power;
- return 0;
+}
+static int locomo_lcd_get_power(struct lcd_device *ldev) +{
- struct locomo_lcd *lcd = lcd_get_data(ldev);
- return lcd->power;
+}
+static struct lcd_ops locomo_lcd_ops = {
- .set_power = locomo_lcd_set_power,
- .get_power = locomo_lcd_get_power,
+};
+#ifdef CONFIG_PM_SLEEP +static int locomo_lcd_suspend(struct device *dev) +{
- struct lcd_device *ldev = dev_get_drvdata(dev);
- struct locomo_lcd *lcd = lcd_get_data(ldev);
- locomo_lcd_off(lcd);
- locomo_lcd_disable_adsync(lcd);
- return 0;
+}
+static int locomo_lcd_resume(struct device *dev) +{
- struct lcd_device *ldev = dev_get_drvdata(dev);
- struct locomo_lcd *lcd = lcd_get_data(ldev);
- locomo_lcd_program_adsync(lcd);
- if (!lcd->power)
locomo_lcd_on(lcd);
- return 0;
+}
+static SIMPLE_DEV_PM_OPS(locomo_lcd_pm, locomo_lcd_suspend, locomo_lcd_resume); +#define LOCOMOLCD_PM (&locomo_lcd_pm) +#else +#define LOCOMOLCD_PM NULL +#endif
+static int locomo_lcd_probe(struct platform_device *dev) +{
- struct lcd_device *lcd_dev;
- struct locomo_lcd *lcd;
- int rc;
- lcd = devm_kmalloc(&dev->dev, sizeof(struct locomo_lcd), GFP_KERNEL);
- if (!lcd)
return -ENOMEM;
- lcd->dev = dev;
- lcd->power = FB_BLANK_NORMAL;
- lcd->regmap = dev_get_regmap(dev->dev.parent, NULL);
- if (!lcd->regmap)
return -ENODEV;
- lcd->data = dev_get_platdata(&dev->dev);
- if (!lcd->data)
return -EINVAL;
- lcd->vsha = devm_gpiod_get(&dev->dev, "VSHA", GPIOD_OUT_LOW);
- if (IS_ERR(lcd->vsha))
return PTR_ERR(lcd->vsha);
- lcd->vshd = devm_gpiod_get(&dev->dev, "VSHD", GPIOD_OUT_LOW);
- if (IS_ERR(lcd->vshd))
return PTR_ERR(lcd->vshd);
- lcd->vee = devm_gpiod_get(&dev->dev, "Vee", GPIOD_OUT_LOW);
- if (IS_ERR(lcd->vee))
return PTR_ERR(lcd->vee);
- lcd->mod = devm_gpiod_get(&dev->dev, "MOD", GPIOD_OUT_LOW);
- if (IS_ERR(lcd->mod))
return PTR_ERR(lcd->mod);
- lcd->comadj = iio_channel_get(&dev->dev, "comadj");
- if (IS_ERR(lcd->comadj)) {
rc = PTR_ERR(lcd->comadj);
if (rc == -ENODEV)
rc = -EPROBE_DEFER;
return rc;
- }
- locomo_lcd_program_adsync(lcd);
- lcd_dev = devm_lcd_device_register(&dev->dev, "locomo", &dev->dev, lcd,
&locomo_lcd_ops);
- if (IS_ERR(lcd_dev)) {
rc = PTR_ERR(lcd_dev);
goto err;
- }
- platform_set_drvdata(dev, lcd_dev);
- lcd_set_power(lcd_dev, FB_BLANK_UNBLANK);
- return 0;
+err:
- locomo_lcd_disable_adsync(lcd);
- iio_channel_release(lcd->comadj);
- return rc;
+}
+static int locomo_lcd_remove(struct platform_device *dev) +{
- struct lcd_device *ldev = platform_get_drvdata(dev);
- struct locomo_lcd *lcd = lcd_get_data(ldev);
- locomo_lcd_off(lcd);
- locomo_lcd_disable_adsync(lcd);
- iio_channel_release(lcd->comadj);
- return 0;
+}
+static void locomo_lcd_shutdown(struct platform_device *dev) +{
- struct lcd_device *ldev = platform_get_drvdata(dev);
- struct locomo_lcd *lcd = lcd_get_data(ldev);
- locomo_lcd_off(lcd);
- locomo_lcd_disable_adsync(lcd);
+}
+static struct platform_driver locomo_lcd_driver = {
- .driver = {
.name = "locomo-lcd",
.pm = LOCOMOLCD_PM,
- },
- .probe = locomo_lcd_probe,
- .remove = locomo_lcd_remove,
- .shutdown = locomo_lcd_shutdown,
+};
+module_platform_driver(locomo_lcd_driver);
+MODULE_AUTHOR("John Lenz lenz@cs.wisc.edu"); +MODULE_AUTHOR("Pavel Machek pavel@ucw.cz"); +MODULE_DESCRIPTION("LoCoMo LCD driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:locomo-lcd");