On Tue, Aug 28, 2012 at 02:46:21PM +0800, Wang Xingchao wrote:
HDMI channel remapping apparently effects HBR packets on Intel's chips. For compressed non-PCM audio, use "straight-through" channel mapping. For uncompressed multi-channel pcm audio, use normal mapping.
Xingchao, have you also tested the legacy 2/5/6/8-channel HDMI PCM playbacks?
Signed-off-by: Wang Xingchao xingchao.wang@intel.com Signed-off-by: Anssi Hannula anssi.hannula@iki.fi
sound/pci/hda/patch_hdmi.c | 50 +++++++++++++++++++++++++++----------------- 1 file changed, 31 insertions(+), 19 deletions(-)
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index d9439c5..fda89e3 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -231,6 +231,11 @@ static struct cea_channel_speaker_allocation channel_allocations[] = { { .ca_index = 0x01, .speakers = { 0, 0, 0, 0, 0, LFE, FR, FL } }, /* Dolby Surround */ { .ca_index = 0x02, .speakers = { 0, 0, 0, 0, FC, 0, FR, FL } }, +{ .ca_index = 0x03, .speakers = { 0, 0, 0, 0, FC, LFE, FR, FL } }, +{ .ca_index = 0x04, .speakers = { 0, 0, 0, RC, 0, 0, FR, FL } }, +{ .ca_index = 0x05, .speakers = { 0, 0, 0, RC, 0, LFE, FR, FL } }, +{ .ca_index = 0x06, .speakers = { 0, 0, 0, RC, FC, 0, FR, FL } }, +{ .ca_index = 0x07, .speakers = { 0, 0, 0, RC, FC, LFE, FR, FL } },
What are you doing here? Please check the comment above channel_allocations[] for the ordering rule.
/* surround40 */{ .ca_index = 0x08, .speakers = { 0, 0, RR, RL, 0, 0, FR, FL } }, /* surround41 */ @@ -239,22 +244,15 @@ static struct cea_channel_speaker_allocation channel_allocations[] = { { .ca_index = 0x0a, .speakers = { 0, 0, RR, RL, FC, 0, FR, FL } }, /* surround51 */ { .ca_index = 0x0b, .speakers = { 0, 0, RR, RL, FC, LFE, FR, FL } },
/* 6.1 */-{ .ca_index = 0x0f, .speakers = { 0, RC, RR, RL, FC, LFE, FR, FL } },
/* surround71 */-{ .ca_index = 0x13, .speakers = { RRC, RLC, RR, RL, FC, LFE, FR, FL } },
-{ .ca_index = 0x03, .speakers = { 0, 0, 0, 0, FC, LFE, FR, FL } }, -{ .ca_index = 0x04, .speakers = { 0, 0, 0, RC, 0, 0, FR, FL } }, -{ .ca_index = 0x05, .speakers = { 0, 0, 0, RC, 0, LFE, FR, FL } }, -{ .ca_index = 0x06, .speakers = { 0, 0, 0, RC, FC, 0, FR, FL } }, -{ .ca_index = 0x07, .speakers = { 0, 0, 0, RC, FC, LFE, FR, FL } }, { .ca_index = 0x0c, .speakers = { 0, RC, RR, RL, 0, 0, FR, FL } }, { .ca_index = 0x0d, .speakers = { 0, RC, RR, RL, 0, LFE, FR, FL } }, { .ca_index = 0x0e, .speakers = { 0, RC, RR, RL, FC, 0, FR, FL } }, +{ .ca_index = 0x0f, .speakers = { 0, RC, RR, RL, FC, LFE, FR, FL } }, { .ca_index = 0x10, .speakers = { RRC, RLC, RR, RL, 0, 0, FR, FL } }, { .ca_index = 0x11, .speakers = { RRC, RLC, RR, RL, 0, LFE, FR, FL } }, { .ca_index = 0x12, .speakers = { RRC, RLC, RR, RL, FC, 0, FR, FL } },
/* surround71 */+{ .ca_index = 0x13, .speakers = { RRC, RLC, RR, RL, FC, LFE, FR, FL } }, { .ca_index = 0x14, .speakers = { FRC, FLC, 0, 0, 0, 0, FR, FL } }, { .ca_index = 0x15, .speakers = { FRC, FLC, 0, 0, 0, LFE, FR, FL } }, { .ca_index = 0x16, .speakers = { FRC, FLC, 0, 0, FC, 0, FR, FL } }, @@ -537,22 +535,36 @@ static void hdmi_debug_channel_mapping(struct hda_codec *codec,
static void hdmi_setup_channel_mapping(struct hda_codec *codec, hda_nid_t pin_nid,
hda_nid_t cvt_nid, int ca){ int i; int err;
- if (hdmi_channel_mapping[ca][1] == 0) {
for (i = 0; i < channel_allocations[ca].channels; i++)hdmi_channel_mapping[ca][i] = i | (i << 4);
- unsigned short val;
- int tmp_mapping[8];
Better to use pre-initialized hbr_mapping[] = { ... } and avoid changing code below.
- bool non_pcm = false;
- val = snd_hda_codec_read(codec, cvt_nid, 0, AC_VERB_GET_DIGI_CONVERT_1, 0);
- non_pcm = !!(val & AC_DIG1_NONAUDIO);
- if (hdmi_channel_mapping[ca][1] == 0 || non_pcm) {
for (i = 0; i < channel_allocations[ca].channels; i++) {if (non_pcm)tmp_mapping[i] = i | (i << 4);elsehdmi_channel_mapping[ca][i] = i | (i << 4);}
hdmi_channel_mapping[ca][i] = 0xf | (i << 4);
if (non_pcm)tmp_mapping[i] = 0xf | (i << 4);elsehdmi_channel_mapping[ca][i] = 0xf | (i << 4);}
for (i = 0; i < 8; i++) { err = snd_hda_codec_write(codec, pin_nid, 0, AC_VERB_SET_HDMI_CHAN_SLOT,
hdmi_channel_mapping[ca][i]);
non_pcm ? tmp_mapping[i] : hdmi_channel_mapping[ca][i]);@@ -686,7 +698,7 @@ static bool hdmi_infoframe_uptodate(struct hda_codec *codec, hda_nid_t pin_nid, }
static void hdmi_setup_audio_infoframe(struct hda_codec *codec, int pin_idx,
struct snd_pcm_substream *substream)
hda_nid_t cvt_nid, struct snd_pcm_substream *substream){ struct hdmi_spec *spec = codec->spec; struct hdmi_spec_per_pin *per_pin = &spec->pins[pin_idx]; @@ -731,13 +743,13 @@ static void hdmi_setup_audio_infoframe(struct hda_codec *codec, int pin_idx, * sizeof(*dp_ai) to avoid partial match/update problems when * the user switches between HDMI/DP monitors. */
- hdmi_setup_channel_mapping(codec, pin_nid, cvt_nid, ca); if (!hdmi_infoframe_uptodate(codec, pin_nid, ai.bytes, sizeof(ai))) { snd_printdd("hdmi_setup_audio_infoframe: " "pin=%d channels=%d\n", pin_nid, channels);
hdmi_setup_channel_mapping(codec, pin_nid, ca);
Why move hdmi_setup_channel_mapping() up? This might re-introduce the half-second silence bug. Please do retest if you really need the move.
Background info:
commit ef18beded8ddbaafdf4914bab209f77e60ae3a18 Author: Wu Fengguang fengguang.wu@intel.com Date: Fri Dec 25 13:14:27 2009 +0800
ALSA: hda - HDMI sticky stream tag support
When we run the following commands in turn (with CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0),
speaker-test -Dhw:0,3 -c2 -twav # HDMI speaker-test -Dhw:0,0 -c2 -twav # Analog
The second command will produce sound in the analog lineout _as well as_ HDMI sink. The root cause is, device 0 "reuses" the same stream tag that was used by device 3, and the "intelhdmi - sticky stream id" patch leaves the HDMI codec in a functional state. So the HDMI codec happily accepts the audio samples which reuse its stream tag.
The proposed solution is to remember the last device each azx_dev was assigned to, and prefer to 1) reuse the azx_dev (and hence the stream tag) the HDMI codec last used 2) or assign a never-used azx_dev for HDMI
With this patch and the above two speaker-test commands, HDMI codec will use stream tag 8 and Analog codec will use 5.
The stream tag used by HDMI codec won't be reused by others, as long as we don't run out of the 4 playback azx_dev's. The legacy Analog codec will continue to use stream tag 5 because its device id is 0 (this is a bit tricky).
hdmi_stop_infoframe_trans(codec, pin_nid); hdmi_fill_audio_infoframe(codec, pin_nid, ai.bytes, sizeof(ai));@@ -1151,7 +1163,7 @@ static int generic_hdmi_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
hdmi_set_channel_count(codec, cvt_nid, substream->runtime->channels);
- hdmi_setup_audio_infoframe(codec, pin_idx, substream);
hdmi_setup_audio_infoframe(codec, pin_idx, cvt_nid, substream);
pinctl = snd_hda_codec_read(codec, pin_nid, 0, AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
-- 1.7.9.5