The expected MCLK frequency ranges and the associated dividers are updated to improve PLL locking in a corner scenario, with low MCLK frequency near an input divider change boundary.
Signed-off-by: Adam Thomson Adam.Thomson.Opensource@diasemi.com ---
This patch is based on v4.6-rc1 kernel version
sound/soc/codecs/da7218.c | 32 ++++++++++++++++---------------- sound/soc/codecs/da7218.h | 21 ++++++++++++--------- 2 files changed, 28 insertions(+), 25 deletions(-)
diff --git a/sound/soc/codecs/da7218.c b/sound/soc/codecs/da7218.c index 93575f2..99ce23e 100644 --- a/sound/soc/codecs/da7218.c +++ b/sound/soc/codecs/da7218.c @@ -1868,27 +1868,27 @@ static int da7218_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id,
/* Verify 32KHz, 2MHz - 54MHz MCLK provided, and set input divider */ if (da7218->mclk_rate == 32768) { - indiv_bits = DA7218_PLL_INDIV_2_5_MHZ; - indiv = DA7218_PLL_INDIV_2_10_MHZ_VAL; + indiv_bits = DA7218_PLL_INDIV_9_TO_18_MHZ; + indiv = DA7218_PLL_INDIV_9_TO_18_MHZ_VAL; } else if (da7218->mclk_rate < 2000000) { dev_err(codec->dev, "PLL input clock %d below valid range\n", da7218->mclk_rate); return -EINVAL; - } else if (da7218->mclk_rate <= 5000000) { - indiv_bits = DA7218_PLL_INDIV_2_5_MHZ; - indiv = DA7218_PLL_INDIV_2_10_MHZ_VAL; - } else if (da7218->mclk_rate <= 10000000) { - indiv_bits = DA7218_PLL_INDIV_5_10_MHZ; - indiv = DA7218_PLL_INDIV_2_10_MHZ_VAL; - } else if (da7218->mclk_rate <= 20000000) { - indiv_bits = DA7218_PLL_INDIV_10_20_MHZ; - indiv = DA7218_PLL_INDIV_10_20_MHZ_VAL; - } else if (da7218->mclk_rate <= 40000000) { - indiv_bits = DA7218_PLL_INDIV_20_40_MHZ; - indiv = DA7218_PLL_INDIV_20_40_MHZ_VAL; + } else if (da7218->mclk_rate <= 4500000) { + indiv_bits = DA7218_PLL_INDIV_2_TO_4_5_MHZ; + indiv = DA7218_PLL_INDIV_2_TO_4_5_MHZ_VAL; + } else if (da7218->mclk_rate <= 9000000) { + indiv_bits = DA7218_PLL_INDIV_4_5_TO_9_MHZ; + indiv = DA7218_PLL_INDIV_4_5_TO_9_MHZ_VAL; + } else if (da7218->mclk_rate <= 18000000) { + indiv_bits = DA7218_PLL_INDIV_9_TO_18_MHZ; + indiv = DA7218_PLL_INDIV_9_TO_18_MHZ_VAL; + } else if (da7218->mclk_rate <= 36000000) { + indiv_bits = DA7218_PLL_INDIV_18_TO_36_MHZ; + indiv = DA7218_PLL_INDIV_18_TO_36_MHZ_VAL; } else if (da7218->mclk_rate <= 54000000) { - indiv_bits = DA7218_PLL_INDIV_40_54_MHZ; - indiv = DA7218_PLL_INDIV_40_54_MHZ_VAL; + indiv_bits = DA7218_PLL_INDIV_36_TO_54_MHZ; + indiv = DA7218_PLL_INDIV_36_TO_54_MHZ_VAL; } else { dev_err(codec->dev, "PLL input clock %d above valid range\n", da7218->mclk_rate); diff --git a/sound/soc/codecs/da7218.h b/sound/soc/codecs/da7218.h index c2c5904..477cd37 100644 --- a/sound/soc/codecs/da7218.h +++ b/sound/soc/codecs/da7218.h @@ -876,15 +876,11 @@ /* DA7218_PLL_CTRL = 0x91 */ #define DA7218_PLL_INDIV_SHIFT 0 #define DA7218_PLL_INDIV_MASK (0x7 << 0) -#define DA7218_PLL_INDIV_2_5_MHZ (0x0 << 0) -#define DA7218_PLL_INDIV_5_10_MHZ (0x1 << 0) -#define DA7218_PLL_INDIV_10_20_MHZ (0x2 << 0) -#define DA7218_PLL_INDIV_20_40_MHZ (0x3 << 0) -#define DA7218_PLL_INDIV_40_54_MHZ (0x4 << 0) -#define DA7218_PLL_INDIV_2_10_MHZ_VAL 2 -#define DA7218_PLL_INDIV_10_20_MHZ_VAL 4 -#define DA7218_PLL_INDIV_20_40_MHZ_VAL 8 -#define DA7218_PLL_INDIV_40_54_MHZ_VAL 16 +#define DA7218_PLL_INDIV_2_TO_4_5_MHZ (0x0 << 0) +#define DA7218_PLL_INDIV_4_5_TO_9_MHZ (0x1 << 0) +#define DA7218_PLL_INDIV_9_TO_18_MHZ (0x2 << 0) +#define DA7218_PLL_INDIV_18_TO_36_MHZ (0x3 << 0) +#define DA7218_PLL_INDIV_36_TO_54_MHZ (0x4 << 0) #define DA7218_PLL_MCLK_SQR_EN_SHIFT 4 #define DA7218_PLL_MCLK_SQR_EN_MASK (0x1 << 4) #define DA7218_PLL_MODE_SHIFT 6 @@ -1336,6 +1332,13 @@ #define DA7218_PLL_FREQ_OUT_90316 90316800 #define DA7218_PLL_FREQ_OUT_98304 98304000
+/* PLL Frequency Dividers */ +#define DA7218_PLL_INDIV_2_TO_4_5_MHZ_VAL 1 +#define DA7218_PLL_INDIV_4_5_TO_9_MHZ_VAL 2 +#define DA7218_PLL_INDIV_9_TO_18_MHZ_VAL 4 +#define DA7218_PLL_INDIV_18_TO_36_MHZ_VAL 8 +#define DA7218_PLL_INDIV_36_TO_54_MHZ_VAL 16 + /* ALC Calibration */ #define DA7218_ALC_CALIB_DELAY_MIN 2500 #define DA7218_ALC_CALIB_DELAY_MAX 5000