The Line In connector is set up as PIN_IN by default, using VREF_HIZ. It is connected to both ADCs, so add it to both input selectors. Also add the ability to use the input mix (on a SoundBlaster one would call this "What You Hear").
Signed-off-by: Tony Vroon tony@linx.net
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 3345331..67dd883 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -1560,18 +1560,22 @@ static struct hda_input_mux alc888_2_capture_sources[2] = { static struct hda_input_mux alc888_acer_aspire_6530_sources[2] = { /* Interal mic only available on one ADC */ { - .num_items = 3, + .num_items = 5, .items = { { "Ext Mic", 0x0 }, + { "Line In", 0x2 }, { "CD", 0x4 }, + { "Input Mix", 0xa }, { "Int Mic", 0xb }, }, }, { - .num_items = 2, + .num_items = 4, .items = { { "Ext Mic", 0x0 }, + { "Line In", 0x2 }, { "CD", 0x4 }, + { "Input Mix", 0xa }, }, } }; @@ -8189,6 +8193,8 @@ static struct snd_kcontrol_new alc888_acer_aspire_6530_mixer[] = { HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT), HDA_CODEC_VOLUME("LFE Playback Volume", 0x0f, 0x0, HDA_OUTPUT), HDA_BIND_MUTE("LFE Playback Switch", 0x0f, 2, HDA_INPUT), + HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT), + HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT), HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT), HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT), HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),