Clément,
On 7/4/20 6:38 AM, Clément Péron wrote:
From: Marcus Cooper codekipper@gmail.com
Add the new DAI block for I2S2 which is used for HDMI audio.
Signed-off-by: Marcus Cooper codekipper@gmail.com Signed-off-by: Clément Péron peron.clem@gmail.com
arch/arm/boot/dts/sunxi-h3-h5.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index 22d533d18992..9be13378d4df 100644 --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -662,6 +662,19 @@ i2s1: i2s@1c22400 { status = "disabled"; };
i2s2: i2s@1c22800 {#sound-dai-cells = <0>;compatible = "allwinner,sun8i-h3-i2s";reg = <0x01c22800 0x400>;interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>;clock-names = "apb", "mod";dmas = <&dma 27>;resets = <&ccu RST_BUS_I2S2>;dma-names = "tx";
`make dtbs_check` reports:
i2s@1c22800: dma-names:0: 'rx' was expected i2s@1c22800: dma-names: ['tx'] is too short i2s@1c22800: dmas: [[28, 27]] is too short
Regards, Samuel
status = "disabled";};- codec: codec@1c22c00 { #sound-dai-cells = <0>; compatible = "allwinner,sun8i-h3-codec";