Now that we support the audio codec found on the Allwinner H3 SoC, add device nodes for it.
Signed-off-by: Chen-Yu Tsai wens@csie.org --- arch/arm/boot/dts/sun8i-h3.dtsi | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index c38b028cac83..ceec979f57e4 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -485,6 +485,20 @@ status = "disabled"; };
+ codec: codec@01c22c00 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun8i-h3-codec"; + reg = <0x01c22c00 0x400>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>; + clock-names = "apb", "codec"; + resets = <&ccu RST_BUS_CODEC>; + dmas = <&dma 15>, <&dma 15>; + dma-names = "rx", "tx"; + allwinner,codec-analog-controls = <&codec_analog>; + status = "disabled"; + }; + uart0: serial@01c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; @@ -600,6 +614,11 @@ #reset-cells = <1>; };
+ codec_analog: codec-analog@01f015c0 { + compatible = "allwinner,sun8i-h3-codec-analog"; + reg = <0x01f015c0 0x4>; + }; + ir: ir@01f02000 { compatible = "allwinner,sun5i-a13-ir"; clocks = <&apb0_gates 1>, <&ir_clk>;