
On 01/12/16 17:38, Philipp Zabel wrote:
Exporting the ELD bytes to userspace allows an application to select an appropriate audio format depending on the current capabilities of the connected HDMI sink device.
This looks good, but I was unable to test it. Obviously amixer or alsamixer is unable to show anything about an ELD mixer element, but shouldn't there be something about it shown under /proc/asound/card0/, or am I mistaken.
Cheers, Jyri
Signed-off-by: Philipp Zabel p.zabel@pengutronix.de
sound/soc/codecs/hdmi-codec.c | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+)
diff --git a/sound/soc/codecs/hdmi-codec.c b/sound/soc/codecs/hdmi-codec.c index 6b327e2..6cb7217 100644 --- a/sound/soc/codecs/hdmi-codec.c +++ b/sound/soc/codecs/hdmi-codec.c @@ -54,6 +54,40 @@ enum { DAI_ID_SPDIF, };
+static int hdmi_eld_ctl_info(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo)
+{
- struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
- struct hdmi_codec_priv *hcp = snd_soc_component_get_drvdata(component);
- uinfo->type = SNDRV_CTL_ELEM_TYPE_BYTES;
- uinfo->count = sizeof(hcp->eld);
- return 0;
+}
+static int hdmi_eld_ctl_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
+{
- struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
- struct hdmi_codec_priv *hcp = snd_soc_component_get_drvdata(component);
- memcpy(ucontrol->value.bytes.data, hcp->eld, sizeof(hcp->eld));
- return 0;
+}
+static const struct snd_kcontrol_new hdmi_controls[] = {
- {
.access = SNDRV_CTL_ELEM_ACCESS_READ |
SNDRV_CTL_ELEM_ACCESS_VOLATILE,
.iface = SNDRV_CTL_ELEM_IFACE_PCM,
.name = "ELD",
.info = hdmi_eld_ctl_info,
.get = hdmi_eld_ctl_get,
- },
+};
- static void hdmi_codec_abort(struct device *dev) { struct hdmi_codec_priv *hcp = dev_get_drvdata(dev);
@@ -327,6 +361,8 @@ static const struct snd_soc_dai_driver hdmi_spdif_dai = { };
static struct snd_soc_codec_driver hdmi_codec = {
- .controls = hdmi_controls,
- .num_controls = ARRAY_SIZE(hdmi_controls), .dapm_widgets = hdmi_widgets, .num_dapm_widgets = ARRAY_SIZE(hdmi_widgets), .dapm_routes = hdmi_routes,