Phiree U2 has an unusual configuration. It only has S/PDIF output, but there are still two devices presented: - device 0: PCM audio, subject to volume control - device 1: non-PCM data (passthrough), not subject to volume control
It looks like the AES bits are set according to the selected device, since outputting PCM data via device 1 will not work (silence).
Currently only the device 0 is shown via the "iec958" alias, and the second device is not accessible via hinted aliases.
Simply provide access to both of these devices via the "iec958" alias.
Reported-by: touc @ XBMC forum Signed-off-by: Anssi Hannula anssi.hannula@iki.fi ---
This isn't really the optimal solution, but is probably one of the simplest (except maybe just using device 1 as the only iec958 device).
I guess the kernel driver (or even config rules with sufficient @func support) could select the appropriate device according to AES0, but not sure if that is worth the effort?
Also, I'm not 100% sure if this is actually uncommon or if we just hide it in on other such devices.
src/conf/cards/USB-Audio.conf | 40 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+)
diff --git a/src/conf/cards/USB-Audio.conf b/src/conf/cards/USB-Audio.conf index ce3ae01..77a48b9 100644 --- a/src/conf/cards/USB-Audio.conf +++ b/src/conf/cards/USB-Audio.conf @@ -52,6 +52,11 @@ USB-Audio.pcm.iec958_device { "USB Device 0x46d:0x992" 999 }
+# Second iec958 device number, if any. +USB-Audio.pcm.iec958_2_device { + "PHIREE U2" 1 # 0 = PCM S/PDIF, 1 = non-PCM S/PDIF +} +
# If a device requires non-standard definitions for front, surround40, # surround51, surround71 or iec958, they can be defined here. @@ -422,4 +427,39 @@ USB-Audio.pcm.iec958.0 { } }
+USB-Audio.pcm.iec958.1 { + @args [ CARD AES0 AES1 AES2 AES3 ] + @args.CARD { type string } + @args.AES0 { type integer } + @args.AES1 { type integer } + @args.AES2 { type integer } + @args.AES3 { type integer } + @func refer + name { + @func concat + strings [ + "cards.USB-Audio." + { @func card_name card $CARD } + ".pcm.iec958_2:CARD=" $CARD + ",AES0=" $AES0 ",AES1=" $AES1 ",AES2=" $AES2 ",AES3=" $AES3 + ] + } + default { + # FIXME: we cannot set the AES parameters + type hw + card $CARD + device { + @func refer + name { + @func concat + strings [ + "cards.USB-Audio.pcm.iec958_2_device." + { @func card_name card $CARD } + ] + } + default 999 + } + } +} + # vim: ft=alsaconf