On 11/05/2023 12:15, Aidan MacDonald wrote:
Krzysztof Kozlowski krzysztof.kozlowski@linaro.org writes:
On 10/05/2023 13:23, Aidan MacDonald wrote:
...
- ess,max-clock-div:
- $ref: /schemas/types.yaml#/definitions/uint32
- description:
Sets the maximum MCLK divider for generating the internal CLK.CLK must be at least 20x the I2C bus speed or I2C transactionswill fail. The maximum divider should be chosen to ensure thatCLK will not fall below the limit.- enum:
- 1- 2- 4- 8- default: 1
Why do you need to customize it per board?
There's no generic API to read or change the bus speed (SCL frequency) for I2C adapters, so it's impossible to calculate a limit on the MCLK divider automatically.
Defaulting to 1 is always safe, but means wasting power at lower sample rates. If you know what the bus speed is you can use a higher divider limit to save power, and it has to be done at the board/firmware level because that's the only place where the bus speed is known.
If I understand correctly, you only miss a way to get bus_freq_hz from i2c_timings to calculate the divider by yourself? This looks like Linux limitation, so we shouldn't push it into DT, but rather fix Linux. The I2C bus rate is known, the MCLK rate as well, so divider is possible to deduce.
I am actually surprised that I2C core does not store the timings anywhere and each bus host has to deal with it on its own.
Best regards, Krzysztof