6 Jun
2009
6 Jun
'09
11:06 a.m.
At Sat, 6 Jun 2009 11:22:20 +0800, Karthik Ramgopal wrote:
Hi, Any progress on 6935G?
No.
Not even latest alsa-snapshot is able to get jack detection and mic working. Controls wrongly mapped as usual.
Well, the wrong mapping is a BIOS issue. But, you can remap via sysfs and let the driver to reconfigure. Did you try it? See HD-Audio.txt in the latest driver.
Takashi
Regards and Thanks, Karthik
On Sat, Jun 6, 2009 at 11:20 AM, Emilio López buhitoescolar@gmail.com wrote:
Takashi, were you able to have a look at it? Any idea on what might be going on? I guess this is an easy to fix issue, as it worked with the old mode, the channel might just need registering or something. Thanks! 2009/5/29 Emilio López <buhitoescolar@gmail.com> 2009/5/27 Takashi Iwai <tiwai@suse.de> At Wed, 27 May 2009 22:54:09 +0200, I wrote: > > At Wed, 27 May 2009 16:27:00 -0300, > Emilio López wrote: > > > > Did my last email arrive? Any idea on what might be going on? > > Sorry, no time for this right now. > It's usually just a missing channel connection or the lack of > the corresponding amp control. In most cases, it's trivial if someone > with a knowledge of HD-audio spec sees it... Just took a quick look now, I found that you didn't unmute "Side Playback Switch" in the disabled case. Do you mean that as "disabled"? Disabled = Muted = Off, Enabled = Unmuted = On. So sound works on enabled, doesn't work on disabled. I assume that these files are from the "old" driver with the bass working as Side volume. Is it correct? Yes thanks, Takashi Thanks for having a look at it :) Emilio > Takashi > > > > > Emilio > > > > 2009/5/24 Emilio López <buhitoescolar@gmail.com> > > > > Well, it seems my last email was too heavy with the 4 files attached. I > > have uploaded them to drop.io, here is the link: http:// drop.io/ > > alsaonaceraspire6930 > > > > Thanks! > > > > 2009/5/23 Emilio López <buhitoescolar@gmail.com> > > > > Here you are, I ran alsa-info.sh in the old alsa (with model=acer) and > > saved the output of the script when side was enabled and disabled, > > with volumes 0 and 100. Hope you can work out the problem with this, > > do not hesitate to ask for more debug info if you need. > > > > Thanks for all! > > > > Emilio > > > > PS: On my previous email (cited below) I wrote "Mic sensing" > > incorrectly, I wanted to write "headphones sensing". > > > > 2009/5/23 Takashi Iwai <tiwai@suse.de> > > > > At Sat, 23 May 2009 12:19:12 -0300, > > Emilio López wrote: > > > > > > I reinstalled 1.0.20 today and almost everything started working > > when I set > > > model=acer-aspire-4930g. Mic sensing works, my mic now records > > too. But my > > > bass does not, and I cannot control it with "Side" anymore. > > > > > > Any idea on how to fix it? The audio setup for this laptop will > > be fully > > > working when I get the bass to play once again. > > > > Could you check with the older version and what "Side" control > > changes > > in hd-audio codec registers? You can just get alsa-info.sh output > > before and after changing the "Side" control value. > > > > thanks, > > > > Takashi > > > >